Building on nearly two decades’ worth of research, a multidisciplinary team at Cornell has blazed a new trail by creating a self-assembled, three-dimensional gyroidal superconductor.
Ulrich Wiesner, a materials science and engineering professor who led the group, says it’s the first time a superconductor, in this case niobium nitride (NbN), has self-assembled into a porous, 3-D gyroidal structure. The gyroid is a complex cubic structure based on a surface that divides space into two separate volumes that are interpenetrating and contain various spirals. Pores and the superconducting material have structural dimensions of only around 10 nanometers, which could lead to entirely novel property profiles of superconductors.
Currently, superconductivity for practical uses such as in magnetic resonance imaging (MRI) scanners and fusion reactors is only possible at near absolute zero (-459.67 degrees Fahrenheit), although recent experimentation has yielded superconducting at a comparatively balmy -70 degrees C (-94 degrees F).
“There’s this effort in research to get superconducting at higher temperatures, so that you don’t have to cool anymore,” Wiesner said. “That would revolutionize everything. There’s a huge impetus to get that.”
Wiesner and his co-author Sol Gruner had been dreaming for over two decades about making a gyroidal superconductor in order to explore how this would affect the superconducting properties. The difficulty was in figuring out a way to synthesize the material. The breakthrough was the decision to use NbN as the superconductor.
Superconductivity, in which electrons flow without resistance and the resultant energy-sapping heat, is still an expensive proposition. MRIs use superconducting magnets, but the magnets constantly have to be cooled, usually with a combination of liquid helium and nitrogen.
Wiesner’s group started by using organic block copolymers to structure direct sol-gel niobium oxide (Nb2O5) into three-dimensional alternating gyroid networks by solvent evaporation-induced self-assembly. Simply put, the group built two intertwined gyroidal network structures, then removed one of them by heating in air at 450 degrees.
The team’s discovery featured a bit of “serendipity,” Wiesner said. In the first attempt to achieve superconductivity, the niobium oxide (under flowing ammonia for conversion to the nitride) was heated to a temperature of 700 degrees. After cooling the material to room temperature, it was determined that superconductivity had not been achieved. The same material was then heated to 850 degrees, cooled and tested, and superconductivity had been achieved.
“We tried going directly to 850, and that didn’t work,” Wiesner said. “So we had to heat it to 700, cool it and then heat it to 850 and then it worked. Only then.”
Wiesner said the group is unable to explain why the heating, cooling and reheating works, but “it’s something we’re continuing to research,” he added.
Limited previous study on mesostructured superconductors was due, in part, to a lack of suitable material for testing. The work by Wiesner’s team is a first step toward more research in this area.
“We are saying to the superconducting community, ‘Hey, look guys, these organic block copolymer materials can help you generate completely new superconducting structures and composite materials, which may have completely novel properties and transition temperatures. This is worth looking into,'” Wiesner said.
The Latest on: Self-assembled superconductor
via Google News
The Latest on: Self-assembled superconductor
- Small (Weinheim an der Bergstrasse, Germany)on May 21, 2020 at 5:00 pm
Physical Properties of Carbon Nanomaterials and Nanoceria Affect Pathways Important to the Nodulation Competitiveness of the Symbiotic N2 -Fixing Bacterium Bradyrhizobium diazoefficiens.
- The Coming Age Of 3D Integrated Circuitson May 17, 2020 at 5:00 pm
The pedagogical model of the integrated circuit goes something like this: take a silicone wafer, etch out a few wells, dope some of the silicon with phosphorous, mask some of the chip off, dope ...
- Journal of physics. Condensed matter : an Institute of Physics journalon May 17, 2020 at 5:00 pm
Fast recovery of the pristine magnetic and structural phases in superconducting LaFeAsO0.89F0.11 by Mn/Fe substitution.
- Our choice from the recent literatureon April 16, 2019 at 7:46 pm
After precipitation and re-dispersion in solution, the nanoparticles self-assembled over 72 hours into left- and right-handed helical ribbons, aggregated into bundles of the same chirality.
- Kavli Symposium 2019: From Unit Cell to Biological Cellon April 5, 2019 at 5:39 pm
For example, the big story of last year’s APS March Meeting, was creation of a superconductor by stacking two layers ... Ten years ago, one of Glotzer’s students found that tetrahedra self-assembled ...
- The thinnest superconductoron February 11, 2019 at 1:11 am
One of the issues discussed is the size and dimension of superconductors: superconductivity is suppressed, for instance, when the film thickness is thinner than the size of the electron pairs that ...
- Prize Recipienton July 6, 2016 at 8:14 am
As a Staff Scientist at the Lawrence Berkeley Laboratory from 1987-1988 he carried out pioneering research on high temperature superconductors and was ... demonstrated a very novel approach to create ...
- Something New Under the Sunon December 13, 2011 at 10:24 am
VIDEO: Created for the 2011 National Science Foundation's International Science & Engineering Visualization Challenge, this video shows how self-assembled porous materials can lead to fuel tanks that ...
via Bing News