A photo-electrochemical cell has been developed at TU Wien (Vienna). It can chemically store the energy of ultraviolet light even at high temperatures.
Nature shows us how it is done: Plants can absorb sunlight and store its energy chemically. Imitating this on large industrial scale, however, is difficult. Photovoltaics convert sunlight to electricity, but at high temperatures, the efficiency of solar cells decreases. Electrical energy can be used to produce hydrogen, which can then be stored – but the energy efficiency of this process is limited.
Scientists at TU Wien (Vienna) have now developed a new concept: By combining highly specialised new materials, they have managed to combine high temperature photovoltaics with an electrochemical cell. Ultraviolet light can be directly used to pump oxygen ions through a solid oxide electrolyte. The energy of the UV light is stored chemically. In the future, this method could also be used to split water into hydrogen and oxygen.
Special Materials for High Temperatures
As a student at TU Wien, Georg Brunauer started pondering possible combinations of photovoltaics and electrochemical storage. The feasibility of such a system depends crucially on whether it is able to work at high temperatures. “This would allow us to concentrate sunlight with mirrors and build large-scale plants with a high rate of efficiency”, says Brunauer. Common photovoltaic cells, however, only work well up to 100°C. In a solar concentrator plant, much higher temperatures would be reached.
While working on his doctoral thesis, Brunauer managed to put his ideas into practice. The key to success was an unusual choice of materials. Instead of the ordinary silicon based photovoltaics, special metal oxides – so-called perovskites – were used. By combining several different metal oxides, Brunauer managed to assemble a cell which combines photovoltaics and electrochemistry. Several research partners at TU Wien contributed to the project. Georg Brunauer is a member of Prof. Karl Ponweiser’s research team at the Institute for Energy Systems and Thermodynamics, Prof. Jürgen Fleig’s group (Chemical Technologies and Analytics) and the Institute for Atomic and Subatomic physics were involved as well.
Creating Voltage and Pumping Ions
“Our cell consists of two different parts – a photoelectric part on top and an electrochemical part below”, says Georg Brunauer. “In the upper layer, ultraviolet light creates free charge carriers, just like in a standard solar cell.” The electrons in this layer are immediately removed and travel to the bottom layer of the electrochemical cell. Once there, these electrons are used to ionize oxygen to negative oxygen ions, which can then travel through a membrane in the electrochemical part of the cell.
“This is the crucial photoelectrochemical step, which we hope will lead to the possibility of splitting water and producing hydrogen”, says Brunauer. In its first evolution step, the cell works as a UV-light driven oxygen pump. It yields an open-current voltage of up to 920 millivolts at a temperature of 400°C.
The photoelectrochemical cell has now been presented in the journal “Advanced Functional Materials”, but the research project continues. “We want to understand the origin of these effects by carrying out a few more experiments, and we hope that we will be able to improve our materials even further”, says Brunauer.
If the electrical power can be increased a slightly, the cell will be able to split water into oxygen and hydrogen. “This goal is within reach, now that we have shown that the cell is working”, says Georg Brunauer. The concept is not only useful for the production of hydrogen, as it could also split carbon dioxide into carbon monoxide. The produced energy carried in the form of hydrogen and carbon monoxide can be used to synthesize fuels.
Learn more: Chemically Storing Solar Power
The Latest on: Chemically storing solar power
via Google News
The Latest on: Chemically storing solar power
- This new finding could make solar energy more efficienton January 23, 2020 at 3:23 am
Scientists for the first time have developed a single molecule that can absorb sunlight efficiently and also act as a catalyst to transform solar ... Chemical and Biophysical Dynamics. “The whole idea ...
- Chemistry finding could make solar energy more efficienton January 23, 2020 at 1:42 am
(Nanowerk News) Scientists for the first time have developed a single molecule that can absorb sunlight efficiently and also act as a catalyst to transform solar energy into hydrogen ... To put it ...
- The battery decade: How energy storage could revolutionize industries in the next 10 yearson December 30, 2019 at 8:57 am
Renewable energy equipment makers and operators, as well as chemical and materials companies could also benefit if storage makes wind and solar power more feasible. Osborne noted that new software ...
- Innovations in Battery Storage, Solar Cells, and Wave Energy, 2019 Research Report - ResearchAndMarkets.comon December 17, 2019 at 10:52 am
The Energy and Power Systems TOE provides insights on ... from energy storage technologies (solid state batteries, solar chemical storage and other advanced energy storage devices) to non ...
- Chemical storage of renewable energieson March 13, 2019 at 6:52 am
To reach this goal, it is required to store electric power in the form of chemical ... From Wind and Solar to Chemical Energy Carriers" is organized for interested students and doctoral researchers.
- Hybrid photoelectrochemical and photovoltaic cells for simultaneous production of chemical fuels and electrical poweron October 28, 2018 at 5:00 pm
Harnessing solar ... maximum power point of the backside photovoltaic junction. The concept that photogenerated charge carriers can be controllably directed to produce electricity and chemical ...
- Stanford scientists unveil new manganese-hydrogen battery for storage of wind, solaron May 2, 2018 at 2:25 am
A research team from U.S.-based Stanford University has developed a prototype of a manganese-hydrogen battery for the storage of power produced by large-scale wind and solar facilities.
- Chemical industry in bid to harness Germany's green power overloadon January 17, 2018 at 4:00 pm
Germany’s chemical industry lobby VCI said in a September report that so-called power-to-X technology ... mainly solar and wind. But the inability to store excess electricity remains a major ...
- Chemically storing solar poweron February 22, 2016 at 4:10 am
Nature shows us how it is done: Plants can absorb sunlight and store its energy chemically. Imitating this on large industrial scale, however, is difficult. Photovoltaics convert sunlight to ...
- 3 Clever New Ways to Store Solar Energyon January 20, 2014 at 4:00 pm
Aziz figured that if he could craft a fuel cell that also runs in reverse—essentially converting energy back into chemical reactants—the resulting flow battery could store solar power using ...
via Bing News