As the availability of clean, potable water becomes an increasingly urgent issue in many parts of the world, researchers are searching for new ways to treat salty, brackish or contaminated water to make it usable. Now a team at MIT has come up with an innovative approach that, unlike most traditional desalination systems, does not separate ions or water molecules with filters, which can become clogged, or boiling, which consumes great amounts of energy.
Instead, the system uses an electrically driven shockwave within a stream of flowing water, which pushes salty water to one side of the flow and fresh water to the other, allowing easy separation of the two streams. The new approach is described in the journal Environmental Science and Technology Letters, in a paper by professor of chemical engineering and mathematics Martin Bazant, graduate student Sven Schlumpberger, undergraduate Nancy Lu, and former postdoc Matthew Suss.
This approach is “a fundamentally new and different separation system,” Bazant says. And unlike most other approaches to desalination or water purification, he adds, this one performs a “membraneless separation” of ions and particles.
Membranes in traditional desalination systems, such as those that use reverse osmosis or electrodialysis, are “selective barriers,” Bazant explains: They allow molecules of water to pass through, but block the larger sodium and chlorine atoms of salt. Compared to conventional electrodialysis, “This process looks similar, but it’s fundamentally different,” he says.
In the new process, called shock electrodialysis, water flows through a porous material —in this case, made of tiny glass particles, called a frit — with membranes or electrodes sandwiching the porous material on each side. When an electric current flows through the system, the salty water divides into regions where the salt concentration is either depleted or enriched. When that current is increased to a certain point, it generates a shockwave between these two zones, sharply dividing the streams and allowing the fresh and salty regions to be separated by a simple physical barrier at the center of the flow.
“It generates a very strong gradient,” Bazant says.
Even though the system can use membranes on each side of the porous material, Bazant explains, the water flows across those membranes, not through them. That means they are not as vulnerable to fouling — a buildup of filtered material — or to degradation due to water pressure, as happens with conventional membrane-based desalination, including conventional electrodialysis. “The salt doesn’t have to push through something,” Bazant says. The charged salt particles, or ions, “just move to one side,” he says.
The underlying phenomenon of generating a shockwave of salt concentration was discovered a few years ago by the group of Juan Santiago at Stanford University. But that finding, which involved experiments with a tiny microfluidic device and no flowing water, was not used to remove salt from the water, says Bazant, who is currently on sabbatical at Stanford.
The new system, by contrast, is a continuous process, using water flowing through cheap porous media, that should be relatively easy to scale up for desalination or water purification. “The breakthrough here is the engineering [of a practical system],” Bazant says.
One possible application would be in cleaning the vast amounts of wastewater generated by hydraulic fracturing, or fracking. This contaminated water tends to be salty, sometimes with trace amounts of toxic ions, so finding a practical and inexpensive way of cleaning it would be highly desirable. This system not only removes salt, but also a wide variety of other contaminants — and because of the electrical current passing through, it may also sterilize the stream. “The electric fields are pretty high, so we may be able to kill the bacteria,” Schlumpberger says.
The research produced both a laboratory demonstration of the process in action and a theoretical analysis that explains why the process works, Bazant says. The next step is to design a scaled-up system that could go through practical testing.
Initially at least, this process would not be competitive with methods such as reverse osmosis for large-scale seawater desalination. But it could find other uses in the cleanup of contaminated water, Schlumpberger says.
Unlike some other approaches to desalination, he adds, this one requires little infrastructure, so it might be useful for portable systems for use in remote locations, or for emergencies where water supplies are disrupted by storms or earthquakes.
Maarten Biesheuvel, a principal scientist at the Netherlands Water Technology Institute who was not involved in this research, says the work “is of very high significance to the field of water desalination. It opens up a whole range of new possibilities for water desalination, both for seawater and brackish water resources, such as groundwater.”
Read more: Shocking new way to get the salt out
The Latest on: Shock electrodialysis
via Google News
The Latest on: Shock electrodialysis
- New desalination technique pushes salt to one side with shockwaveson November 13, 2018 at 4:00 pm
Researchers at MIT may have found a solution using a method they are calling shock electrodialysis. It uses electric shock waves to separate contaminated or salty water into two separate streams, with ...
- New Desalination Method Shocks The Salts Out Of Wateron November 23, 2015 at 2:30 pm
When the electrical current became strong enough, it induced a shockwave that separated these regions into two streams—one briny, one fresh—a phenomenon known as shock electrodialysis. The device ...
- MIT develops new technology that shocks the salt out of wateron November 23, 2015 at 11:32 am
The technique, called shock electrodialysis, does not rely on barriers to strain sodium particles from water. Instead, it uses a porous material – called a frit, made of small glass particles – with ...
- MIT has created a filter-free water desalination process that relies on electrical shockwaveson November 18, 2015 at 10:45 am
The technique, known as shock electrodialysis, is unique because it’s a “membraneless separation system”. Traditional desalination processes typically use reverse osmosis or electrodialysis to pull ...
- MIT has created a filter-free water desalination process that relies on electrical shockwaveson November 17, 2015 at 3:59 pm
Related: Egypt has developed a game-changing low-power water desalination technique Chemical engineering and mathematics professor Martin Bazant and his team of student researchers use shock ...
- Researchers develop ‘shocking’ new water desalination processon November 17, 2015 at 5:30 am
Dubbed “shock electrodialysis,” the process allows water to flow through a porous material called a frit that has membranes, or electrodes, closing off the system on each side. As water flows through ...
- A shocking way to make fresh water could be the UAE’s answer to desalinationon November 16, 2015 at 11:34 am
Instead, Prof Bazant and colleagues have developed something they are calling “shock electrodialysis”. Details of the new system are disclosed in a paper in the current edition of the journal ...
- New System Uses Electrical Shockwaves to Purify Wateron November 14, 2015 at 4:00 pm
It also doesn’t involve boiling, which consumes large amounts of energy. Their process is referred to as “shock electrodialysis, and is described by the researchers as a form of “membraneless ...
- MIT has developed a new way to desalinate wateron November 12, 2015 at 3:26 am
The process, called shock electrodialysis, filters water through a material made of small glass particles, according to an MIT News report. When an electric current is introduced to the system, the ...
- Research team invents efficient shockwave-based process for desalination of wateron November 11, 2015 at 4:00 pm
Compared to conventional electrodialysis, "This process looks similar, but it's fundamentally different," he says. In the new process, called shock electrodialysis, water flows through a porous ...
via Bing News