3D printing is revolutionizing the production of lightweight structures, soft robots and flexible electronics, but the technology struggles with complex, multimaterial integration.
To print a flexible device, including the electronics, a 3D printer must be able to seamlessly transition from a flexible material that moves with your joints for wearable applications, to a rigid material that accommodates the electronic components. It would also need to be able to embed electrical circuitry using multiple inks of varying conductivity and resistivity, precisely switching between them. And, it would be ideal to do all of this without the stopping the printing process.
The ability to integrate disparate materials and properties within printed objects is the next frontier in 3D printing.
Towards this objective, Harvard researchers have designed new multimaterial printheads that mix and print concentrated viscoelastic inks that allow for the simultaneous control of composition and geometry during printing. Using active mixing and fast-switching nozzles, these novel printheads change material composition on the fly and could pave the way for entirely 3D-printed wearable devices, soft robots, and electronics.
The research was led by Jennifer A. Lewis, the Hansjörg Wyss Professor of Biologically Inspired Engineering at the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) and a Core Faculty Member at the Wyss Institute for Biologically Inspired Engineering at Harvard. The work was published in The Proceedings of the National Academy of Sciences (PNAS).
Mixing complex fluids is fundamental for printing a broad range of materials. But most mixing approaches are passive, wherein two streams of fluids converge into a single channel where they undergo diffusive mixing. This method works well with low-viscosity fluids, but is ineffective with high-viscosity fluids, like gels, especially in small volumes over short timescales.
To address this challenge, a new multimaterial printhead based on active mixing was designed by Lewis, along with Thomas Ober, postdoctoral research scholar at the Wyss Institute; and Daniele Foresti, the Society in Science Branco Weiss postdoctoral fellow. The active mixer efficiently mixes a wide range of complex fluids by using a rotating impeller inside a microscale nozzle.
“Passive mixtures don’t guarantee perfectly mixed materials, especially highly viscous inks,” said Ober, the paper’s first author. “We developed a rational framework — and verified it experimentally — for designing active microfluidic mixers that can mix a wide variety of materials.”
The team used this knowledge to create active mixing printheads for patterning heterogeneous materials in three dimensions.
The research team demonstrated several uses of their active mixing technology. They showed that silicone elastomers can be seamlessly printed into gradient architectures composed of soft and rigid regions. These structures may find potential application in flexible electronics, wearable devices, and soft robotics. They also printed reactive materials, such as two-part epoxies, which typically harden quickly when the two parts are combined. Finally, they showed that conductive and resistive inks could be mixed on demand to embed electrical circuitry inside 3D printed objects.
“The recent work by the Lewis Group is a significant advancement to the field of additive manufacturing,” said Christopher Spadaccini, Director of the Center for Engineered Materials, Manufacturing and Optimization at Lawrence Livermore National Lab. “By allowing for the mixing of two highly viscous materials on the fly, the promise of mixed material systems with disparate mechanical and functional properties becomes much more realistic. Before, this was really only a concept. This work will be foundational for applications which required integrated electrical and structural materials.”
Lewis’ lab also recently designed another printhead that can rapidly switch between multiple inks within a single nozzle, eliminating the structural defects that often occur during the start-and-stop process of switching materials.
“This printhead design eliminates the need to align multiple nozzles as well as start and stop ink flow on demand,” said James Hardin, first author of a recently published paper in Advanced Materials. This paper was co-authored by Ober, research fellow Alexander Valentine, and Lewis.
“Together, these active mixing and switching printheads provide an important advance for multimaterial 3D printing,” said Lewis. “They allow one to programmably control both materials composition and structure at the microscale, opening new avenues for creating materials by design.”
The Latest on: Multimaterial 3D printing
via Google News
The Latest on: Multimaterial 3D printing
- Get up and go! 3D printed bots are getting closeron July 20, 2019 at 12:51 am
Due to the complexities of 3D printing and the potential damage to the sensors ... and the research paper is titled "Design Considerations for 3D Printed, Soft, Multimaterial Resistive Sensors for ... […]
- Three-dimensional printing comes to world of mass productionon July 17, 2019 at 8:01 am
Inkbit, a startup out of MIT, has created a multimaterial 3-D printer capable of printing extremely flexible materials more accurately than competitors, according to the founders. Credit: Courtesy of ... […]
- 3D printing technology could improve hospital patient careon July 16, 2019 at 7:34 am
The world’s only full colour, multi-material 3D printing technology is being used within France’s Bordeaux University Hospital (CHU) to improve kidney cancer surgery. The printer named Stratasys J750 ... […]
- Assembling a Prusa MK3S 3D Printeron July 16, 2019 at 6:30 am
3D printing's one of those fields that's fascinated me ever ... PETG or the flexible filaments. There's also a multi-material upgrade kit available that allows 5 filaments to be used at once, although ... […]
- Opportunities for Multimaterial 3D Printing in Manufacturingon July 15, 2019 at 5:06 pm
NEW YORK, July 15, 2019 /PRNewswire/ -- Additive Manufacturing is one of the rapidly growing technologies being adopted for designing, rapid prototyping and manufacturing of new components. ... […]
- Bordeaux University Hospital uses 3D printing to improve kidney tumor removal surgeryon July 15, 2019 at 5:16 am
Bordeaux University Hospital (CHU) in France is leading the charge to improve success rates of complex kidney tumor removal surgery, thanks to unique full-color, multi-material 3D printing technology. ... […]
- Topology optimization and 3D printing of multimaterial magnetic actuators and displayson July 12, 2019 at 10:15 pm
1 Computer Science and Artificial Intelligence Laboratory, Massachusetts Institute of Technology, Cambridge, MA 02139, USA. 2 Electrical Engineering and Computer Science Department, Massachusetts ... […]
- 3D Printing Healthcare Market Size by Key Manufacturers and Application 2019 with Share, Revenue and Forecaston July 10, 2019 at 8:12 am
Download the Sample Report @ https://www.alliedmarketresearch.com/request-sample/834 The world 3D printing healthcare market is mainly driven by several technological breakthroughs, such as ... […]
- Biocompatible 3D Printing Materials Market Size Worth $618.31 Million by 2023 - Technavioon July 10, 2019 at 3:04 am
The biocompatible 3D printing materials market is moderately ... and scalability of product parts and limited multi-material printing capabilities. Conventional manufacturing systems still have ... […]
- Multi-material 3D printer aimed squarely at professionalson July 1, 2019 at 5:00 pm
3D printers capable of churning out multi-material, multi-colored objects in a single print run can take up quite a bit of office space, and can also cost a small fortune. Take the Objet500 Connex3 ... […]
via Bing News