Inspired by the limitations of biomimetic glues in wet environments, scientists from Nanyang Technological University, Singapore (NTU Singapore) have invented a glue that will harden when a voltage is applied to it.
This opens a plethora of commercially promising advances such as:
- Using the adhesive to glue metal panels under water, for example, in underwater pipe repairs;
- Replacing sutures when there is a need to join body tissues together during surgery;
- Tailoring the properties of the adhesive to be more gel-like or rubber-like which would work well in vibrating or damp environments
This innovative research was published last week in Nature Communications, a peer-reviewed scientific journal under the Nature Publishing Group.
The new adhesive, nicknamed “Voltaglue”, opens up a host of possible practical applications, from making underwater repair works for ships and pipes, to being a versatile tool for doctors performing surgery.
In future, surgeons could use biocompatible glue patches to join two pieces of internal body tissue together in one or two minutes, instead of sutures which often require 15 to 20 minutes of careful stitching.
Assistant Professor Terry Steele, the lead scientist for this research project from NTU’s School of Materials Science and Engineering, said it took them over a year to develop an adhesive that could work under wet conditions such as in the human body or underwater.
“Most glues in the market don’t work under wet conditions, much like how sticky tapes won’t work if the surface is wet, since the adhesive will stick to the water instead of the surface,” said the American scientist, who graduated from the University of Minnesota before he moved to NTU Singapore.
Usually adhesives such as superglue harden upon contact with moisture in the air. Others like epoxy, often used in electronic mobile devices, has to be baked in high heat of about 150 degrees Celsius, or made using two different chemicals mixed together. These methods are unsuitable in wet environments.
“We had to find a way to make glue which cures (hardens) when we want it without being affected by the environmental conditions, so electricity was the best approach for us. The hardness of our glue can be adjusted by the amount of time we apply a voltage to it, which we call electrocuring.”
This unique electrocuring property allows Voltaglue to be customised for different applications.
“For example, if we are gluing metal panels underwater, we want it hard enough to stick for a long time. However, for medical applications, we want the glue to be more rubber-like so it wouldn’t cause any damage to the surrounding soft tissues,” Asst Prof Steele explained.
Voltaglue is developed using hydrogels consisting of carbon molecules called carbenes grafted onto tree-shaped plastic known as dendrimers.
Upon contact with electricity, the reactive carbenes, which are capable of hooking onto any surface nearby, are released. The amount of “hooks” created depends on how long electricity is applied and how many carbenes are present.
This technology is currently patented through NTUitive, the university’s commercialisation arm.
Strong but reversible
Another distinct feature of the new glue is that it could be made reversible, said Asst Prof Steele. He is now furthering research in this area, aided by a competitive research grant of almost US$670,000 awarded by Singapore’s Ministry of Education won earlier this month.
As the world becomes more concerned about sustainability, companies are looking to design ‘End-of-Life’ products that can be easily recycled, reused or remanufactured into new parts and components so as to reduce waste and energy consumption.
Glues which can cure and be subsequently un-cured through electricity would be the industry’s “Holy Grail”, as automakers and shipyards will be able to assemble and dissemble parts with ease, minimising the need for fixation by bolts, nuts and screws.
Such reversible glue will also open up new possibilities in the global adhesive market in transportation applications, estimated to be worth over US$3.3 billion in 2016 (Adhesives and Adhesive Applying Equipment, by BCC Research)
Moving forward, Asst Prof Steele and his team of 11 researchers are working to improve their new electrocuring glue so it can harden in just a few seconds, compared to about 30 seconds now; and also working on a way to undo the process.
The Latest on: Biomimetic glues
via Google News
The Latest on: Biomimetic glues
- A strongly adhesive hemostatic hydrogel for the repair of arterial and heart bleeds on May 14, 2019 at 8:09 am
The hemostatic and wound-sealing performance of matrix gel is significantly better than commercial Fibrin Glue and Surgiflo TM. Together with its biomimetic composition and biocompatibility, these ... […]
- Biomimetic engineering of non-adhesive glycocalyx-like surfaces using oligosaccharide surfactant polymers on March 28, 2019 at 8:14 pm
A significant challenge in engineering a glycocalyx-like surface on biomaterials used for implantation is to achieve a high surface density of oligosaccharides. Typical biomaterials are hydrophobic, ... […]
- Mussels inspire glue that sticks despite water on March 12, 2019 at 5:00 pm
In order to develop new materials able to bind within harsh environments, we made a biomimetic polymer that is modeled after the adhesive proteins of mussels.” New findings, published in the journal ... […]
- Ultra-Strong Biomimetic Adhesive Could Allow Human Wall-Walking, Ceiling-Dancing on February 1, 2019 at 4:00 pm
Leaping tall buildings, punching through solid concrete walls and using public phone booths as ersatz changing rooms without anyone noticing are still beyond human capacity, but a development at ... […]
- A Nitric Oxide Releasing Biomimetic Nanomatrix for the Revascularization of Pancreatic Islet Grafts on January 14, 2019 at 12:51 pm
In light of this goal, PAs containing endothelial cell adhesive ligands (YIGSR ... burst release followed by a slow sustained release over a period of 30 days. This biomimetic nanomatrix was found to ... […]
- Sea Creatures Inspire Researchers to Create Formaldehyde-Free Glue on September 16, 2018 at 8:06 am
Fortunately for us, a team of researchers at Purdue University have come up with a non-toxic alternative. They’ve cooked up a biomimetic glue that was inspired by undersea creatures. Chemistry ... […]
- 58. Adhesion in Medicine on May 24, 2018 at 8:26 am
J Card Surg 18:494–499 CrossRef Bitton R, Bianco-Peled H (2008) Novel biomimetic adhesives based on algae glue. Macromol Biosci 8:393–400 CrossRef Braunwald NS, Gay W, Tatooles CJ (1966) Evaluation of ... […]
- The Horizon 2020 AIRCOAT project: A Biomimetic Hull Coating to revolutionise the ship coating sector? on April 26, 2018 at 2:16 pm
develops a passive air lubrication technology that utilises the biomimetic Salvinia effect. This effect enables trapping air while submerged in water. The project technologically implements this ... […]
- New biomimetic glue shows high-strength bonding under water (w/video) on September 10, 2017 at 2:21 pm
(Nanowerk News) An adhesive that works under water and is modeled after those created by shellfish to stick to surfaces is stronger than many commercial glues created for the purpose. “Our current ... […]
- Scientists Made The Perfect Underwater Glue By Stealing An Idea From Shellfish on March 14, 2017 at 12:53 am
In a paper recently published in the journal Applied Materials and Interfaces, researchers at Purdue University detail a new "biomimetic" glue, inspired by the observation that shellfish like mussels ... […]
via Bing News