Generating and storing renewable energy, such as solar or wind power, is a key barrier to a clean-energy economy.
When the Joint Center for Artificial Photosynthesis (JCAP) was established at Caltech and its partnering institutions in 2010, the U.S. Department of Energy (DOE) Energy Innovation Hub had one main goal: a cost-effective method of producing fuels using only sunlight, water, and carbon dioxide, mimicking the natural process of photosynthesis in plants and storing energy in the form of chemical fuels for use on demand. Over the past five years, researchers at JCAP have made major advances toward this goal, and they now report the development of the first complete, efficient, safe, integrated solar-driven system for splitting water to create hydrogen fuels.
“This result was a stretch project milestone for the entire five years of JCAP as a whole, and not only have we achieved this goal, we also achieved it on time and on budget,” says Caltech’s Nate Lewis, George L. Argyros Professor and professor of chemistry, and the JCAP scientific director.
The new solar fuel generation system, or artificial leaf, is described in the August 27 online issue of the journal Energy and Environmental Science. The work was done by researchers in the laboratories of Lewis and Harry Atwater, director of JCAP and Howard Hughes Professor of Applied Physics and Materials Science.
“This accomplishment drew on the knowledge, insights and capabilities of JCAP, which illustrates what can be achieved in a Hub-scale effort by an integrated team,” Atwater says. “The device reported here grew out of a multi-year, large-scale effort to define the design and materials components needed for an integrated solar fuels generator.”
The new system consists of three main components: two electrodes—one photoanode and one photocathode—and a membrane. The photoanode uses sunlight to oxidize water molecules, generating protons and electrons as well as oxygen gas. The photocathode recombines the protons and electrons to form hydrogen gas. A key part of the JCAP design is the plastic membrane, which keeps the oxygen and hydrogen gases separate. If the two gases are allowed to mix and are accidentally ignited, an explosion can occur; the membrane lets the hydrogen fuel be separately collected under pressure and safely pushed into a pipeline.
Semiconductors such as silicon or gallium arsenide absorb light efficiently and are therefore used in solar panels. However, these materials also oxidize (or rust) on the surface when exposed to water, so cannot be used to directly generate fuel. A major advance that allowed the integrated system to be developed was previous work in Lewis’s laboratory, which showed that adding a nanometers-thick layer of titanium dioxide (TiO2)—a material found in white paint and many toothpastes and sunscreens—onto the electrodes could prevent them from corroding while still allowing light and electrons to pass through. The new complete solar fuel generation system developed by Lewis and colleagues uses such a 62.5-nanometer-thick TiO2 layer to effectively prevent corrosion and improve the stability of a gallium arsenide–based photoelectrode.
Another key advance is the use of active, inexpensive catalysts for fuel production. The photoanode requires a catalyst to drive the essential water-splitting reaction. Rare and expensive metals such as platinum can serve as effective catalysts, but in its work the team discovered that it could create a much cheaper, active catalyst by adding a 2-nanometer-thick layer of nickel to the surface of the TiO2. This catalyst is among the most active known catalysts for splitting water molecules into oxygen, protons, and electrons and is a key to the high efficiency displayed by the device.
The photoanode was grown onto a photocathode, which also contains a highly active, inexpensive, nickel-molybdenum catalyst, to create a fully integrated single material that serves as a complete solar-driven water-splitting system.
A critical component that contributes to the efficiency and safety of the new system is the special plastic membrane that separates the gases and prevents the possibility of an explosion, while still allowing the ions to flow seamlessly to complete the electrical circuit in the cell. All of the components are stable under the same conditions and work together to produce a high-performance, fully integrated system. The demonstration system is approximately one square centimeter in area, converts 10 percent of the energy in sunlight into stored energy in the chemical fuel, and can operate for more than 40 hours continuously.
“This new system shatters all of the combined safety, performance, and stability records for artificial leaf technology by factors of 5 to 10 or more ,” Lewis says.
“Our work shows that it is indeed possible to produce fuels from sunlight safely and efficiently in an integrated system with inexpensive components,” Lewis adds, “Of course, we still have work to do to extend the lifetime of the system and to develop methods for cost-effectively manufacturing full systems, both of which are in progress.”
The Latest on: Artificial photosynthesis
via Google News
The Latest on: Artificial photosynthesis
- Artificial Photosynthesis Helps Address Environmental Pollution and Global Warmingon January 21, 2020 at 8:25 am
This process does not leave behind any byproducts in water. The study has been published in the Materials Today journal. It is essential to identify an optimal high-performance photocatalyst to ...
- New Artificial Photosynthesis – The Methane-Generating Methodon January 16, 2020 at 1:24 am
Photosynthesis is the process by which plants, and even several bacterias, use the energy from sunlight to generate glucose from carbon dioxide and water, giving oxygen in return as a byproduct.
- Fake photosynthesis turns CO2 into ‘green methane’on January 13, 2020 at 1:10 pm
A new artificial photosynthesis approach uses sunlight to turn carbon dioxide into methane, which could help make natural-gas-powered devices carbon neutral. Methane is the main component of natural ...
- 'Green methane' from artificial photosynthesis could recycle CO2on January 13, 2020 at 4:52 am
A new artificial photosynthesis approach uses sunlight to turn carbon dioxide into methane, which could help make natural-gas-powered devices carbon neutral. The methane-generating method is made ...
- How a scientific breakthrough is making "green methane"on January 11, 2020 at 2:52 pm
Scientists are creating “green methane” out of a process called artificial photosynthesis — which could make natural-gas-powered devices carbon neutral.
- Okayama University e-Bulletin: Excellence in Research on Artificial Photosynthesison December 24, 2019 at 3:27 am
Okayama University e-Bulletin highlights news and views from one of Japan's largest comprehensive universities internationally recognized for its dynamic and innovative approach to ...
- Okayama University e-Bulletin: Excellence in Research on Artificial Photosynthesison December 24, 2019 at 3:22 am
OKAYAMA, Japan, Dec. 24, 2019 /PRNewswire/ -- This issue includes a feature on "Jian-Rena Shen research on artificial photosynthesis." Other contents include news on "Okayama University ...
- Advancing photosystem II photoelectrochemistry for semi-artificial photosynthesison December 21, 2019 at 9:19 am
Furthermore, these studies have accelerated the development of semi-artificial photosynthesis to afford autonomous, solar-driven, fuel-forming biohybrid devices. This Review summarizes the latest ...
- DoE achieves breakthrough in artificial photosynthesison December 6, 2019 at 2:35 am
Researchers at the Department of Energy (DoE) have achieved a chemical reaction that drastically improves upon current methods for artificial photosynthesis, providing a new process for the ...
- Japan research on photosynthetic process paves way for artificial conversionson October 26, 2019 at 5:31 pm
The team says that its work has provided important data for work toward making artificial photosynthesis a reality. Photosynthesis, which uses sunlight to convert water and carbon dioxide into ...
via Bing News