Storing solar energy as hydrogen is a promising way for developing comprehensive renewable energy systems.
To accomplish this, traditional solar panels can be used to generate an electrical current that splits water molecules into oxygen and hydrogen, the latter being considered a form of solar fuel. However, the cost of producing efficient solar panels makes water-splitting technologies too expensive to commercialize. EPFL scientists have now developed a simple, unconventional method to fabricate high-quality, efficient solar panels for direct solar hydrogen production with low cost. The work is published in Nature Communications.
Many different materials have been considered for use in direct solar-to-hydrogen conversion technologies but “2-D materials” have recently been identified as promising candidates. In general these materials–which famously include graphene–have extraordinary electronic properties. However, harvesting usable amounts of solar energy requires large areas of solar panels, and it is notoriously difficult and expensive to fabricate thin films of 2-D materials at such a scale and maintain good performance.
Kevin Sivula and colleagues at EPFL addressed this problem with an innovative and cheap method that uses the boundary between two non-mixing liquids. The researchers focused on one of the best 2-D materials for solar water splitting, called “tungsten diselenide”. Past studies have shown that this material has a great efficiency for converting solar energy directly into hydrogen fuel while also being highly stable.
Before making a thin film of it, the scientists first had to achieve an even dispersion of the material. To do this, they mixed the tungsten diselenide powder with a liquid solvent using sonic vibrations to “exfoliate” it into thin, 2-D flakes, and then added special chemicals to stabilize the mix. Developed by Sivula’s lab (2014), this technique produces an even dispersion of the flakes that is similar to an ink or a paint.
The researchers then used an out-of-the-box innovation to produce high-quality thin films: they injected the tungsten diselenide ink at the boundary between two liquids that do not mix. Exploiting this oil-and-water effect, they used the interface of the two liquids as a “rolling pin” that forced the 2-D flakes to form an even and high-quality thin film with minimal clumping and restacking. The liquids were then carefully removed and the thin film was transferred to a flexible plastic support, which is much less expensive than a traditional solar panel.
The thin film produced like this was tested and found to be superior in efficiency to films made with the same material but using other comparable methods. At this proof-of-concept stage, the solar-to-hydrogen conversion efficiency was around 1%–already a vast improvement over thin films prepared by other methods, and with considerable potential for higher efficiencies in the future.
The Latest on: Solar energy as hydrogen
via Google News
The Latest on: Solar energy as hydrogen
- Hydrogen energy – how do I get a project approval?on August 16, 2019 at 2:22 pm
"Green" or renewable hydrogen is produced using the same methods but the production process is powered by renewable energy such as solar, wind or biomass. Once produced, hydrogen can be blended into ...
- Hydrogen will ease ‘massive challenge’ as world shifts to wind and solar: Finkelon August 4, 2019 at 10:29 pm
Just when you thought wind and solar would dominate electricity supply for the next hundred years, along comes Alan Finkel to kick off the Australian Clean Energy Summit with a rousing hymn to ...
- Germany Turns to Hydrogen in Quest for Clean Energy Economyon August 1, 2019 at 9:00 pm
Green hydrogen is made by converting wind or solar electricity into hydrogen through electrolysis -- a zero-emission but expensive process that consumes a lot of energy. “For hydrogen, business cases ...
- Promising new solar-powered path to hydrogen fuel productionon August 1, 2019 at 1:07 pm
Solar-driven water splitting is a promising route towards a renewable energy-based economy. The generated hydrogen could serve as both a transportation fuel and a critical chemical feedstock for ...
- Stanford Study Examines Hydrogen as A Commercially Viable Storage Medium For Renewable Energyon July 21, 2019 at 5:00 pm
Renewable energy from solar panels and wind turbines upsets the apple cart ... of the Technical University of Munich suggests using excess renewable energy to make hydrogen could be profitable.
- Scientists invent a solar panel that produces hydrogenon July 2, 2019 at 5:00 pm
Scientists in Belgium have invented a solar panel that produces hydrogen as a source of fuel to heat homes ... Martens estimates that 20 solar panels could provide enough energy and electricity to ...
- Resorcinol–formaldehyde resins as metal-free semiconductor photocatalysts for solar-to-hydrogen peroxide energy conversionon July 1, 2019 at 12:17 pm
Fig. 2: Structural and electronic properties of RF resins. Fig. 3: Photocatalytic properties of RF resins. Fig. 4: Solid-state DD/MAS/ 13 C-NMR charts for the RF523 resins. Fig. 5: Energy diagrams and ...
- Green hydrogen airs at G20 meeting of energy ministers this weekon June 10, 2019 at 7:21 am
What’s keeping the lid on hydrogen? MacFarlane explained that although the cost of renewable energy – particularly solar – is competitive and declining, the equipment required for catalyzing water ...
- 'The perfect storm': hydrogen gains ground on LNG as alternative fuelon April 7, 2019 at 11:03 am
Green hydrogen is produced from running an electric current through water using an electrolyser powered by renewable energy such as solar. While the current policy focus has been on the production of ...
- Old Toyota manufacturing plant set to re-open as hydrogen 'hub'on March 20, 2019 at 9:15 am
It already plays host to a 500kW rooftop solar array. Hydrogen at the industrial-scale site will be generated through electrolysis, before being compressed and stored. Toyota has confirmed that the ...
via Bing News