X-ray Studies at SLAC’s Synchrotron Pave the Way for Better Methods to Convert Sunlight to Electricity
A new material design tested in experiments at the Department of Energy’s SLAC National Accelerator Laboratory could make low-cost solar panels far more efficient by greatly enhancing their ability to collect the sun’s energy and release it as electricity.
A team of University of California, Los Angeles, scientists found that by assembling the components of the panels to more closely resemble the natural systems plants use to tap the sun’s energy, it may be possible to separate positive and negative charges in a stable way for up to several weeks compared to just millionths of a second – the current standard for many modern solar panels.
“In photosynthesis, plants that are exposed to sunlight use carefully organized nanoscale structures within their cells to rapidly separate charges – pulling electrons away from the positively charged molecule that is left behind, and keeping positive and negative charges separated,” said Sarah Tolbert, a UCLA professor of chemistry and one of the senior authors of the research. “That separation is the key to making the process so efficient.”
The team’s X-ray studies at SLAC’s Stanford Synchrotron Radiation Lightsource (SSRL), a DOE Office of Science User Facility, enabled them to see, at a microscopic level, which material design has the most ideal structure at the nanoscale for promoting this charge separation. The results are published in the June 19 editionof Science.
Plastic Panels Provide Low-cost Alternative to Silicon
To capture energy from sunlight, conventional rooftop solar cells use silicon, which can be expensive. Solar cells can also be made using lower-cost materials like plastics, but plastic cells are far less efficient — in large part because the separated positive and negative charges in the material often recombine before they can become electrical energy.
“Modern plastic solar cells don’t have well-defined structures like plants do because we never knew how to make them before,” Tolbert said. “But this new system pulls charges apart and keeps them separated for days, or even weeks. Once you make the right structure, you can vastly improve the retention of energy.”
A Better Recipe for ‘Spaghetti and Meatballs’
The UCLA-developed system is composed of strands of a polymer, the building block of plastics, that absorb sunlight and pass electrons to a fullerene, a spherical carbon molecule also known as a “buckyball.”
The materials in these types of solar cells are typically organized like a plate of cooked pasta – a disorganized mass of long, skinny polymer “spaghetti” with random fullerene “meatballs.” But this arrangement makes it difficult to get current out of the cell because the electrons sometimes hop back to the polymer spaghetti and are lost.
The researchers figured out how to arrange the elements more neatly – small bundles of uncooked spaghetti with precisely placed meatballs. Some fullerene meatballs are designed to sit inside the polymer spaghetti bundles and others are forced to stay on the outside.
The fullerenes inside the structure take electrons from the polymers and toss them to the outside fullerenes, which can effectively keep the electrons separated from the polymer for weeks. A series of experiments at SSRL and other studies confirmed the best arrangement of the polymer strands and buckyballs.
Successes and Next Steps
“When the charges never come back together, it becomes easier to get them out of the solar cell in the form of electricity,” said Benjamin Schwartz, a UCLA professor of chemistry and a co-author of the study. “This is the first time such long charge lifetimes have been shown using this type of material.”
Researchers found that the materials self-assemble into this ordered form when placed in close proximity. The new design is also more environmentally friendly than current technology, because the materials can assemble in water instead of more toxic organic solutions that are typically used.
“Once you make the materials, you can dump them into water and they assemble into the appropriate structure because of the way the materials are designed,” Schwartz said.
The Latest on: Efficient low-cost solar panels
via Google News
The Latest on: Efficient low-cost solar panels
- First US steel plants powered by wind, solar energy are coming for industry with big carbon footprinton December 7, 2019 at 12:31 pm
Nucor's $250 million micromill in Sedalia, Missouri, is set to be the first U.S. steel plant to run on wind energy. A recycled steel plant run by EVRAZ in Colorado is transitioning from coal to solar ...
- Concentrating Solar Power Market Examination and Industry Growth Till 2025 Which Is Going to Change Industry Futureon December 5, 2019 at 11:10 am
Through concentrated solar power technology, better efficiency, low-cost investments, and thermal storage capacity benefits are obtained. These benefits have resulted in an increasing demand for the ...
- SMSL ROUND-UP: JinkoSolar, Trina Solar and Risen Energyon November 29, 2019 at 3:35 am
‘Solar Module ... was fabricated with a low-cost industrial process of advanced i-TOPCon technologies, on a large-sized phosphorus-doped Cast-mono Si substrate. The 247.79 cm2 bifacial solar cell ...
- Trina Solar Announces New Efficiency Record of 23.22% with n-type i-TOPCon Solar Cell on Cast-mono substrateon November 26, 2019 at 4:08 pm
The record-breaking n-type bifacial i-TOPCon solar cell was fabricated with a low-cost industrial process ... the leader of the global smart energy industry. For more information, please visit ...
- Trina Claims Record for Solar Cell Efficiencyon November 26, 2019 at 6:05 am
Trina Solar ... high-efficiency, large-area, quasi-monocrystalline n-type (c-Si) i-TOPCon solar cell. The record-breaking n-type bifacial i-TOPCon solar cell was fabricated with a low-cost ...
- Efficient organic solar cells with a low energy loss enabled by a quinoxaline-based acceptoron September 14, 2019 at 5:00 pm
Organic photovoltaics (OPVs) have attracted much attention because of the advantages in low-cost and large-area fabrication ... Shengjie Xu, Xiaozhang Zhu. Efficient organic solar cells achieved at a ...
- Kumkum to create green energy! Indian scientists develop low-cost, eco-friendly solar cells using vermilion dyeon July 29, 2019 at 5:35 am
Scientists at IIT Hyderabad have developed low-cost ... dye-sensitised solar cell (DSSC) is based on New Fuchsin (NF) dye with aqueous electrolyte and platinum-free counter electrodes, according to ...
- Breakthrough in new material to harness solar poweron May 14, 2019 at 11:30 am
Physicists are pushing the performance of solar cells ... costs of solar panels, which is an important advance in photovoltaics." While Yan's team has improved the quality of the materials and the ...
- Seawater turns into freshwater through solar energy: A new low-cost technologyon January 8, 2019 at 1:13 am
Up to now, a well-known disadvantage of 'passive' technologies for desalination has been the low energy efficiency ... solar energy, especially in developing countries. Furthermore, the technology is ...
- Trina Solar takes n-type mono IBC cell to record 25.04% conversion efficiencyon February 14, 2018 at 1:44 am
Trina Solar noted that the n-type mono IBC cell used a large-area (243.18 cm2) 6 inch N-type monocrystalline silicon wafer, with a low-cost industrial IBC process ... 18 world records in PV cell ...
via Bing News