An emerging additive manufacturing technology could be fast and cheap enough to compete with conventional methods, but it faces materials-related challenges
The inventor of a new kind of 3-D printer says his research group will build a massive machine capable of mass-producing competitively priced plastic parts within two years.
Making plastic parts layer by layer according to digital instructions is a very slow process compared with conventional methods. That’s why additive manufacturing–or 3-D printing, as it is more popularly known–has thus far been economical only for making small batches of niche products like dental implants and hearing-aid shells. The new technique could increase the number of parts that can be made economically this way from thousands to millions at a time, at least for small, complicated objects.
Compared with conventional technologies like injection molding, additive manufacturing could significantly reduce material use and eliminate the costly machine tooling needed to make certain complicated shapes. It also makes it more practical to design unique architectures for parts that, for example, could help make automobiles and aircraft lighter and more fuel-efficient (See “10 Breakthrough Technologies 2013: Additive Manufacturing”).
Laser sintering machines build objects by using a single-point laser to melt and fuse thin layers of powdered polymer, one by one. Hopkinson replaced the laser system, which is both expensive and slow, with an infrared lamp and an ink-jet print head. The print head rapidly and precisely delivers patterns of radiation-absorbing material to the powder bed. Subsequently exposing the powder to infrared light melts and fuses the powder into patterns, and the machine creates thin layers, one by one—similar to the way laser sintering works, but much faster.
Hopkinson’s group has already shown that the method works at a relatively small scale. They’ve also calculated that, given a large enough building area, high-speed sintering is “on the order of 100 times faster” than laser sintering certain kinds of parts, and that it can be cost competitive with injection molding for making millions of small, complex parts at a time, says Hopkinson. Now the group will actually build the machine, using funding from the British government and a few industrial partners.
High-speed sintering has the potential to be “very quick,” and the process could end up being much cheaper than laser sintering in certain cases, says Phil Reeves, the vice president of strategic consulting for Stratasys, a leading maker of many kinds of additive manufacturing machines and materials. However, a lot of work is still needed to develop materials that can work with the process, he says. Judging from what Hopkinson has made public, the range of plastics that work with high-speed sintering is quite limited, Reeves says, and many widely used plastics may not be compatible with the process, since it relies on combining the powder with an additional, light-absorbing material.
The Latest on: 3D Manufacturing
via Google News
The Latest on: 3D Manufacturing
- Filoviruses – Ebola and Marburg Viruseson June 13, 2019 at 5:00 pm
BOMV might cause disease in humans with symptoms similar to Ebola Virus Disease. Mengla virus (MLAV) and Lloviu virus (LLOV) are newly discovered members of the filovirus family and phylogenetically ... […]
- HCMV: how a virus that infects 50% of people is helping develop new cancer treatmentson June 11, 2019 at 3:38 am
Well, for most of us it does not cause a problem. If your immune system is fully developed and functions well your body can keep the virus in check. This explains why HCMV can cause congenital defects ... […]
- Unveiling how the genome has condensed itself inside the viruson May 29, 2019 at 4:14 pm
Scientists have deciphered how a virus genome is condensed inside the capsid of a virus. "The motivation of the study was to increase our basic understanding of viral replication, but in the long term ... […]
- An Ebola-like virus called Mengla has been found in Chinaon January 19, 2019 at 1:01 am
Scientists from China and Singapore recently reported the discovery of an Ebola-like virus in the liver of fruit bats in Yunnan Province, China. The Mengla virus, named for the county it was ... […]
- Mengla: the Ebola-like virus recently found in Chinaon January 16, 2019 at 11:57 am
(MENAFN - The Conversation) Scientists from China and Singapore recently reported the discovery of an Ebola-like virus in the liver of fruit bats in Yunnan Province, China. The Mengla virus, named for ... […]
- New Ebola-like virus called Mengla discovered in Chinaon January 9, 2019 at 8:23 pm
The virus was found in Rousettus bats in Měnglà County, Yunnan Province, southern China (Credit: Rajesh Puttaswamaiah, Bat Conservation India Trust CC BY 3.0) A team of scientists in China and ... […]
- Fears of a new killer virus as scientists discover bats carrying a pathogen similar to Ebolaon January 8, 2019 at 8:57 am
A new virus similar to Ebola has been discovered in fruit bats in China, scientists have revealed. Experts fear the Mengla virus, named after the province where it was discovered, could have ... […]
- Deadly bum-bleeding Ebola-style virus found in Chinese bats sparking fears it could spread to humans ‘with devastating consequences’on January 8, 2019 at 8:15 am
The potentially dangerous Mengla virus comes from the Rousettus fruit bat in Yunnan Province Mengla virus, from the Rousettus bat in Yunnan Province, China, is “evolutionarily closely related to Ebola ... […]
- New bat-borne virus related to Ebolaon January 7, 2019 at 10:40 am
Newly discovered Mengla virus is evolutionarily closely related to Ebola virus and Marburg virus and shares several important functional similarities with them. For example, the genome organization of ... […]
- New bat-borne virus related to Ebola discovered by Singapore teamon January 7, 2019 at 8:58 am
The researchers discovered the new virus while analysing the diversity of filoviruses in Rousettus bats. They named it the Mengla virus because it was discovered in Megla County, Yunnan Province, ... […]
via Bing News