New research shows how inkjet-printing technology can be used to mass-produce electronic circuits made of liquid-metal alloys for “soft robots” and flexible electronics.
Elastic technologies could make possible a new class of pliable robots and stretchable garments that people might wear to interact with computers or for therapeutic purposes. However, new manufacturing techniques must be developed before soft machines become commercially feasible, said Rebecca Kramer, an assistant professor of mechanical engineering at Purdue University.
“We want to create stretchable electronics that might be compatible with soft machines, such as robots that need to squeeze through small spaces, or wearable technologies that aren’t restrictive of motion,” she said. “Conductors made from liquid metal can stretch and deform without breaking.”
A new potential manufacturing approach focuses on harnessing inkjet printing to create devices made of liquid alloys.
“This process now allows us to print flexible and stretchable conductors onto anything, including elastic materials and fabrics,” Kramer said.
A research paper about the method will appear on April 18 in the journal Advanced Materials. The paper generally introduces the method, called mechanically sintered gallium-indium nanoparticles, and describes research leading up to the project. It was authored by postdoctoral researcher John William Boley, graduate student Edward L. White and Kramer.
A printable ink is made by dispersing the liquid metal in a non-metallic solvent using ultrasound, which breaks up the bulk liquid metal into nanoparticles. This nanoparticle-filled ink is compatible with inkjet printing.
“Liquid metal in its native form is not inkjet-able,” Kramer said. “So what we do is create liquid metal nanoparticles that are small enough to pass through an inkjet nozzle. Sonicating liquid metal in a carrier solvent, such as ethanol, both creates the nanoparticles and disperses them in the solvent. Then we can print the ink onto any substrate. The ethanol evaporates away so we are just left with liquid metal nanoparticles on a surface.”
After printing, the nanoparticles must be rejoined by applying light pressure, which renders the material conductive. This step is necessary because the liquid-metal nanoparticles are initially coated with oxidized gallium, which acts as a skin that prevents electrical conductivity.
“But it’s a fragile skin, so when you apply pressure it breaks the skin and everything coalesces into one uniform film,” Kramer said. “We can do this either by stamping or by dragging something across the surface, such as the sharp edge of a silicon tip.”
The approach makes it possible to select which portions to activate depending on particular designs, suggesting that a blank film might be manufactured for a multitude of potential applications.
“We selectively activate what electronics we want to turn on by applying pressure to just those areas,” said Kramer, who this year was awarded an Early Career Development award from the National Science Foundation, which supports research to determine how to best develop the liquid-metal ink.
The process could make it possible to rapidly mass-produce large quantities of the film.
The Latest on: Inkjet-printed liquid metal
via Google News
The Latest on: Inkjet-printed liquid metal
- How Inkjet-printed liquid metal can help make wearable tech, soft roboticson December 22, 2019 at 4:00 pm
Washington, Apr.9 : A new study has provided a deeper insight into how Inkjet-printed liquid metal can help in producing wearable flexible tech and soft robotics. Inkjet-printing technology can be ...
- Electronic Tattoos Add Power to Wearable Computingon November 20, 2018 at 12:00 am
The low-cost process adds a trace of an electrically conductive, liquid metal alloy to tattoo paper that adheres ... "We showed for the first time that inkjet-printed patterns of silver nanoparticles ...
- These temporary electronic tattoos could redefine wearableson November 13, 2018 at 4:00 pm
The liquid metal fuses with the silver to create these conductive ... The big advance, as co-author Mahmoud Tavakoli explained in a news release, is the ability to join the inkjet-printed nanoparticle ...
- inkjet printerson May 30, 2017 at 8:13 am
46 pm Researchers at Purdue University have outlined a way to mass-produce circuits made of liquid-metal alloys using inkjet-printing technology, paving the way for “soft robots” and other kinds of ...
- Inkjet-printed liquid metal could bring wearable tech, soft roboticson April 8, 2015 at 9:56 am
New research shows how inkjet-printing technology can be used to mass-produce electronic circuits made of liquid-metal alloys for 'soft robots' and flexible electronics. New research shows how ...
- Inkjet-printed liquid metal could bring wearable tech, soft roboticson April 8, 2015 at 8:42 am
IMAGE: New research shows how inkjet-printing technology can be used to mass-produce electronic circuits made of liquid-metal alloys for 'soft robots' and flexible electronics. view more WEST ...
- Inkjet-printed liquid metal could bring wearable tech, soft roboticson April 7, 2015 at 7:58 am
This artistic rendering depicts electronic devices created using a new inkjet-printing technology to produce circuits made of liquid-metal alloys for "soft robots" and flexible electronics. Elastic ...
- Inkjet-printed liquid metal could bring wearable tech, soft roboticson April 6, 2015 at 5:00 pm
New research shows how inkjet-printing technology can be used to mass-produce electronic circuits made of liquid-metal alloys for "soft robots" and flexible electronics. Elastic technologies could ...
via Bing News