Ultra-high efficiency solar cells similar to those used in space may now be possible on your rooftop thanks to a new microscale solar concentration technology developed by an international team of researchers.
“Concentrating photovoltaic (CPV) systems leverage the cost of high efficiency multi-junction solar cells by using inexpensive optics to concentrate sunlight onto them,” said Noel C. Giebink, assistant professor of electrical engineering, Penn State. “Current CPV systems are the size of billboards and have to be pointed very accurately to track the sun throughout the day. But, you can’t put a system like this on your roof, which is where the majority of solar panels throughout the world are installed.”
Giebink notes that the falling cost of typical silicon solar cells is making them a smaller and smaller fraction of the overall cost of solar electricity, which also includes “soft” costs like permitting, wiring, installation and maintenance that have remained fixed over time. Improving cell efficiency from about 20 percent for silicon toward greater than 40 percent with multi-junction CPV is important because increasing the power generated by a given system reduces the overall cost of the electricity that it generates.
To enable CPV on rooftops, the researchers combined miniaturized, gallium arsenide photovoltaic cells, 3D-printed plastic lens arrays and a moveable focusing mechanism to reduce the size, weight and cost of the CPV system and create something similar to a traditional solar panel that can be placed on the south-facing side of a building’s roof. They report their results today (Feb. 5) in Nature Communications.
“We partnered with colleagues at the University of Illinois because they are experts at making small, very efficient multi-junction solar cells,” said Giebink. “These cells are less than 1 square millimeter, made in large, parallel batches and then an array of them is transferred onto a thin sheet of glass or plastic.”
To focus sunlight on the array of cells, the researchers embedded them between a pair of 3D-printed plastic lenslet arrays. Each lenslet in the top array acts like a small magnifying glass and is matched to a lenslet in the bottom array that functions like a concave mirror. With each tiny solar cell located in the focus of this duo, sunlight is intensified more than 200 times. Because the focal point moves with the sun over the course of a day, the middle solar cell sheet tracks by sliding laterally in between the lenslet array.
Previous attempts at such translation-based tracking have only worked for about two hours a day because the focal point moves out of the plane of the solar cells, leading to loss of light and a drop in efficiency. By sandwiching the cells between the lenslet arrays, the researchers solved this problem and enabled efficient solar focusing for a full eight hour day with only about 1 centimeter of total movement needed for tracking.
The Latest on: Concentrating solar cells
via Google News
The Latest on: Concentrating solar cells
- Coal Stocks Are Cheap. Here Are 3 Ideas If You Dare.on November 14, 2019 at 3:33 am
It is among the forces blamed for climate change and is being phased out of power generation around the globe—replaced by renewable electricity generators such as windmills and solar panels. It is a ...
- Solar Roast Coffee shares the Pueblo loveon November 13, 2019 at 12:01 am
scaling up from a mail-order business in Oregon that utilized a mirror-lined satellite dish (a concentrated solar power method) to two brick-and-mortar shops in Pueblo. Though they’ve since upgraded ...
- New breakthrough in solar cell material is thanks to a 'sandwich'on November 12, 2019 at 11:03 pm
At the moment, current solar cells only capture 15% to 18% of the solar energy on average, but in 2009 solar cells started incorporating the mineral perovskite. Since then, researchers have been ...
- Trump’s US in R&D push to boost domestic PV amid ongoing trade waron November 8, 2019 at 5:52 am
Earlier this week, the Department of Energy (DOE) put forward the list of winners of the US$128 million FY2019 round of the Solar Energy Technologies Office, set up in 2011 to sponsor research able to ...
- US DoE Announces New Projects to Advance Solar Technologieson November 7, 2019 at 10:32 pm
To achieve these deep cost reductions, the PV projects will focus on increasing performance, reducing material and manufacturing costs, and improving the reliability of PV cells, modules, and systems.
- Energy Storage Moves Up The Agenda For Teslaon November 6, 2019 at 1:48 pm
In recent months, resources have been concentrated on getting the Model 3 up and running ... Australia has a very high usage of solar panels. This makes it a natural and expanding market for Tesla.
- The hunt for life beyond Earth begins in the oceanson November 5, 2019 at 8:51 pm
And by studying how organisms live in those punishing conditions, scientists believe they can devise methods to detect life elsewhere in the solar system. That’s the aim of a group of ... “We’re ...
- How to make solar electricity cheap? Move light sidewayson November 5, 2019 at 6:00 am
Researchers are working on bringing costs of solar panels down, but Davis’s approach is to reduce costs by using less of them through concentrating and directing the sun’s rays. It then doesn’t matter ...
- Verification project in Morocco with Azelio’s energy storage system and solar panels opens the way for establishment in new marketson October 29, 2019 at 12:58 am
The scope has been extended from the storage of concentrated solar power (CSP) to the ability to charge the storage solution using solar PV and wind power, for example. This new possibility has led to ...
- How the solar power plant at Trustinvestment workson October 15, 2019 at 1:40 am
These cells are usually made from silicon alloys and are the ... onto receiver tubes that run the length of the mirror at their focal point. This concentrated solar energy heats up a fluid that ...
via Bing News