When the robots of the future are set to extract minerals from other planets, they need to be both self-learning and self-repairing. Researchers at Oslo University have already succeeded in producing self-instructing robots on 3D printers.
On the third floor of the Department of Informatics there is a robotics laboratory which looks like a playroom This is where researchers are testing how their robots can figure out how to move past barriers and other obstacles.
“In the future, robots must be able to solve tasks in deep mines on distant planets, in radioactive disaster areas, in hazardous landslip areas and on the sea bed beneath the Antarctic. These environments are so extreme that no human being can cope. Everything needs to be automatically controlled. Imagine that the robot is entering the wreckage of a nuclear power plant. It finds a staircase that no-one has thought of. The robot takes a picture. The picture is analysed. The arms of one of the robots is fitted with a printer. This produces a new robot, or a new part for the existing robot, which enables it to negotiate the stairs,” hopes Associate ProfessorKyrre Glette who is part of the Robotics and intelligent systems research team at Oslo University’s Department of Informatics.
Even if Glette’s ideas remain visions of the future, the robotics team in the Informatics Building have already developed three generations of self-learning robots.
Professor Mats Høvin was the man behind the first model, the chicken-robot named “Henriette”, which received much media coverage when it was launched ten years ago.
Henriette had to teach itself how to walk, and to jump over obstacles. And if it lost a leg, it had to learn, unaided, how to hop on the other leg.
A few years later, Masters student Tønnes Nygaard launched the second generation robot. At the same time, the Informatics team developed a simulation program that was able to calculate what the body should look like. Just as for Henriette, its number of legs was pre-determined, but the computer program was at liberty to design the length of the legs and the distance between them.
The third generation of robots brings even greater flexibility. The simulation programme takes care of the complete design and suggests the optimal number of legs and joints.
“We tell the simulation program what we would like the robot to do, how fast it should walk, its size and energy consumption. For instance, we may want the robot to be able to turn around and change direction, climb over boulders and walk on rugged ground,” says Kyrre Glette.
In response, the simulation program suggests the optimal solution, including the shape of the body and the number of legs. It simulates thousands of possibilities and produces the best models by means of artificial evolution.
In other words, the computer program comes up with a set of proposals for different robots designed for optimal functionality.
“None of them is intrinsically better than the others. The only difference is their strategies for solving the tasks,” says research fellow Eivind Samuelsen.
Unfortunately, it is difficult to arrive at the perfect solution by way of simulation, because our wish-list of what we want the robots to do is becoming increasingly complicated.
Simulation is not enough. In order to test the functionality of the robots, they need to undergo trials in the real world. The robots are produced as printouts from a 3D printer.
“Once the robots have been printed, their real-world functionalities quite often prove to be different from those of the simulated versions. We are talking of a reality gap. There will always be differences. Perhaps the floor is more slippery in reality, meaning that the friction coefficient will have to be changed. We are therefore studying how the robots deteriorate from simulation to laboratory stage,” says Mats Høvin.
The robots are frequently only half as good in real life.
“Practice enables the robots’ performance to be improved by 20 to 40 per cent. We hope that gradually, we will be able to double their performance ratings so that they end up being just as good as, or perhaps even better than their simulated counterparts.”
The researchers are looking at the robots’ ability to learn and practice even at the simulation program stage.
“We then proceed to check whether the robots are able to learn in a real-world setting. One of the tests is to see how the robots react to obstacles,” says Samuelsen.
From three to six legs
The robotics team are currently comparing the performance of five robots which in theory should be equally good.
Three of the five robots have four legs, one has three, another has six. The fewer legs, the less energy is consumed. One of the robots is fitted with single-joint legs. The others have legs with two joints.
“It may well be that the best solution would be to use three joints, but this would mean that the energy consumption would be far too high.”
Just like in the natural world, the researchers have therefore opted to restrict the number of joints to two.
“Single-jointed legs enable the robot to walk forward efficiently, but it will find it difficult to turn around,” Glette points out.
When the researchers are testing the robots, they set up an obstacle course to enable the robots to teach themselves how to pass the hurdles.
The researchers hope that in the future, the robots will be able to give automatic feedback to the simulation program about how well they work, so that the next time around, the computer will be in a position to design an even better robot.
“Once we have further perfected the robots, we will also be testing how they work if printed in a softer material.”
3D printers make it possible to create sophisticated robots and other objects.
The Latest on: Self-learning robots
via Google News
The Latest on: Self-learning robots
- Building a roadmap to real world outcomeson April 2, 2020 at 6:07 pm
One of these is a partnership with Toshiba that seeks to develop self-learning AI software to facilitate next-generation manufacturing and social infrastructure projects. One potential application, ...
- RoboticsTomorrow Newsletter - April 1/20on April 1, 2020 at 8:31 am
Companies are striving to produce increasingly large varieties of products – including various sizes and combinations. Seen, stored, learned - Self-learning robots solve tasks with the help of an ...
- Norwegian Robotics Team Designs 3D Printed, Self-Learning Robotson March 24, 2020 at 5:00 pm
The robotics team has designed three generations of self-learning and self-repairing robots. The first robot, a “chicken robot” the team referred to as “Henriette,” taught itself to walk ...
- Sensor Solutions for a More Transparent Supply Chainon March 24, 2020 at 11:22 am
Additional cloud intelligence in the form of data analyses and apps allow the use of self-learning mechanisms in the sensors ... technologies are combined with each other. These mobile robots can have ...
- Engineers create shape-changing, free-roaming soft roboton March 18, 2020 at 4:52 pm
(Nanowerk News) Advances in soft robotics could someday allow robots to work alongside humans, helping them lift heavy objects or carrying them out of danger. As a step toward that future, Stanford ...
- Roboy the robot is fully compliant, soft, and huggableon March 16, 2020 at 12:19 pm
It's not the classical way to build robots like an "if, then, else," because it's such a fussy, messy body that the neuro-network behind it has to be very, very smart and self-learning.
- KNAPP and Covariant Introduce the Pick-it-Easy Robot, Powered by Artificial Intelligence (AI) to North American Marketon March 9, 2020 at 2:18 pm
The Pick-It-Easy Robot powered by Covariant AI ... resource efficient, ergonomic and self-learning. The company’s North American headquarters are in Atlanta, GA. For more information, visit ...
- KNAPP and Covariant Introduce the Pick-it-Easy Robot, Powered by Artificial Intelligence (AI) to North American Marketon March 9, 2020 at 1:50 pm
The Pick-It-Easy Robot powered by Covariant AI ... Our clients experience results that are flexible, resource efficient, ergonomic and self-learning. The company’s North American headquarters are in ...
- Robots - Featureson May 22, 2019 at 11:37 pm
Mogens B.P., Project Manager, Galten, Denmark Intelligent grippers with more sensing and better control of forces and with possibility to handle fragile objects with complex shapes. Robots that can ...
- Who wants to live forever? - Anne Zammiton November 17, 2018 at 11:55 pm
Last year a European Parliament report proposed that self-learning robots be granted “electronic personalities” allowing them to be insured, like corporations. They could be held liable for ...
via Bing News