What does it take to fabricate electronic and medical devices tinier than a fraction of a human hair?
Nanoengineers at the University of California, San Diego recently invented a new method of lithography in which nanoscale robots swim over the surface of light-sensitive material to create complex surface patterns that form the sensors and electronics components on nanoscale devices. Their research, published recently in the journal Nature Communications,offers a simpler and more affordable alternative to the high cost and complexity of current state-of-the-art nanofabrication methods such as electron beam writing.
Led by distinguished nanoengineering professor and chair Joseph Wang, the team developed nanorobots, or nanomotors, that are chemically-powered, self-propelled and magnetically controlled. Their proof-of-concept study demonstrates the first nanorobot swimmers able to manipulate light for nanoscale surface patterning. The new strategy combines controlled movement with unique light-focusing or light-blocking abilities of nanoscale robots.
“All we need is these self-propelled nanorobots and UV light,” said Jinxing Li, a doctoral student at the Jacobs School of Engineering and first author. “They work together like minions, moving and writing and are easily controlled by a simple magnet.”
State-of-art lithography methods such as electron beam writing are used to define extremely precise surface patterns on substrates used in the manufacture of microelectronics and medical devices. These patterns form the functioning sensors and electronic components such as transistors and switches packed on today’s integrated circuits. In the mid-20thcentury the discovery that electronic circuits could be patterned on a small silicon chip, instead of assembling independent components into a much larger “discrete circuit,” revolutionized the electronics industry and set in motion device miniaturization on a scale previously unthinkable.
Today, as scientists invent devices and machines on the nanoscale, there is new interest in developing unconventional nanoscale manufacturing technologies for mass production.
Li was careful to point out that this nanomotor lithography method cannot completely replace the state-of-the-art resolution offered by an e-beam writer, for example. However, the technology provides a framework for autonomous writing of nanopatterns at a fraction of the cost and difficulty of these more complex systems, which is useful for mass production. Wang’s team also demonstrated that several nanorobots can work together to create parallel surface patterns, a task that e-beam writers cannot perform.
The Latest on: Nanofabrication
via Google News
The Latest on: Nanofabrication
- Replicating surfaces, right down to a fraction of an atomon November 30, 2020 at 5:01 am
Simon, Xinzhe Wang, and Jan Schroers. In a second paper, in ACS Applied Materials and Interfaces, Schwarz also looks at nanofabrication of bulk metallic glasses, but with a different approach.
- DNA origami makes 3D superconducting nanostructureson November 25, 2020 at 3:23 am
Researchers in the US and Israel have developed a way to make 3D superconducting nanostructures by combining DNA with niobium and silicon. This new technique might be used to make signal amplifiers ...
- Controlling fully integrated nanodiamondson November 23, 2020 at 7:21 am
These optical waveguides, measuring less than a micrometre, were produced with the electron-beam lithography and reactive ion etching equipment at the Münster Nanofabrication Facility (MNF).
- Controlling fully integrated nanodiamondson November 23, 2020 at 4:18 am
These optical waveguides, measuring less than a micrometre, were produced with the electron-beam lithography and reactive ion etching equipment at the Münster Nanofabrication Facility (MNF). “Here, ...
- Ion-Beam-Based Nanofabricationon November 21, 2020 at 11:16 pm
Looking for an examination copy? If you are interested in the title for your course we can consider offering an examination copy. To register your interest please contact [email protected] ...
- Nanofabrication Labon August 17, 2020 at 9:11 pm
The Nanofabrication Lab features a state-of-the-art, 4,200 ft2 Class 100 clean room equipped with over 40 pieces of process and analytical instrumentation for complex research projects that require ...
- The Scifres Nanofabrication Laboratoryon August 9, 2020 at 3:13 am
The BNC facility comprises one of the largest and cleanest university cleanrooms in the world. The nanofabrication cleanroom consists of 25,000 sq. ft. of bay-chase cleanroom, with 20% of the bays ...
- Clean Room & Nanofabrication Facilityon July 30, 2020 at 9:45 pm
Open to both Boston College and External Users, this laboratory is home to over 30 high-end micro and nanoscale instrumentation systems worth several million dollars. Comprised of 1,500 square feet of ...
- Process engineer- Nanofabricationon February 29, 2020 at 2:59 pm
a master's degree (FH/University) in the field of micro/nanotechnology, physics, material science or similar field OR a bachelor's degree (FH/University) with at least three years of relevant ...
- What is nanofabrication?on October 22, 2018 at 7:59 am
The terms nanofabrication and nanomanufacturing are often used interchangeably for making one-, two-, or three-dimensional nanostructures in various contexts (medical, photonics, electronics, energy, ...
via Bing News