Working with two magnetic fields and a laser, all at low points of their power outputs, Sandia’s Z machine has released neutrons in an amount surprisingly close to ‘break-even’ fusion.
Researchers at Sandia National Laboratories’ Z machine have produced a significant output of fusion neutrons, using a method fully functioning for only little more than a year.
The experimental work is described in a paper to be published in the Sept. 24 Physical Review Letters online. A theoretical PRL paper to be published on the same date helps explain why the experimental method worked. The combined work demonstrates the viability of the novel approach.
“We are committed to shaking this [fusion] tree until either we get some good apples or a branch falls down and hits us on the head,” said Sandia senior manager Dan Sinars. He expects the project, dubbed MagLIF for magnetized liner inertial fusion, will be “a key piece of Sandia’s submission for a July 2015 National Nuclear Security Administration review of the national Inertial Confinement Fusion Program.”
Inertial confinement fusion creates nanosecond bursts of neutrons, ideal for creating data to plug into supercomputer codes that test the safety, security and effectiveness of the U.S. nuclear stockpile. The method could be useful as an energy source down the road if the individual fusion pulses can be sequenced like an automobile’s cylinders firing.
MagLIF uses a laser to preheat hydrogen fuel, a large magnetic field to squeeze the fuel and a separate magnetic field to keep charged atomic particles from leaving the scene.
It only took the two magnetic fields and the laser, focused on a small amount of fusible material called deuterium (hydrogen with a neutron added to its nucleus), to produce a trillion fusion neutrons (neutrons created by the fusing of atomic nuclei). Had tritium (which carries two neutrons) been included in the fuel, scientific rule-of-thumb says that 100 times more fusion neutrons would have been released. (That is, the actual release of 10 to the 12th neutrons would be upgraded, by the more reactive nature of the fuel, to 10 to the 14th neutrons.)
Still, even with this larger output, to achieve break-even fusion — as much power out of the fuel as placed into it — 100 times more neutrons (10 to the 16th) would have to be produced.
The gap is sizable, but the technique is a toddler, with researchers still figuring out the simplest measures: how thick or thin key structural elements of the design should be and the relation between the three key aspects of the approach — the two magnetic fields and the laser.
The first paper, “Experimental Demonstration of Fusion-Relevant Conditions in Magnetized Liner inertial fusion,” (MagLIF) by Sandia lead authors Matt Gomez, Steve Slutz and Adam Sefkow, describes a fusion experiment remarkably simple to visualize. The deuterium target atoms are placed within a long thin tube called a liner. A magnetic field from two pancake-shaped (Helmholtz) coils above and below the liner creates an electromagnetic curtain that prevents charged particles, both electrons and ions, from escaping. The extraordinarily powerful magnetic field of Sandia’s Z machine then crushes the liner like an athlete crushing a soda can, forcefully shoving atoms in the container into more direct contact. As the crushing begins, a laser beam preheats the deuterium atoms, infusing them with energy to increase their chances of fusing at the end of the implosion. (A nuclear reaction occurs when an atom’s core is combined with that of another atom, releasing large amounts of energy from a small amount of source material. That outcome is important in stockpile stewardship and, eventually, in civilian energy production.) Trapped energized particles including fusion-produced alpha particles (two neutrons, two protons) also help maintain the high temperature of the reaction.
“On a future facility, trapped alpha particles would further self-heat the plasma and increase the fusion rate, a process required for break-even fusion or better,” said Sefkow.
The Latest on: Fusion power
via Google News
The Latest on: Fusion power
- Tiny granules can help bring clean and abundant fusion power to Earthon July 2, 2019 at 6:24 pm
Physicists have concluded that injecting tiny beryllium pellets into ITER could help stabilize the plasma that fuels fusion reactions. Beryllium, a hard, silvery metal long used in X-ray machines and ... […]
- 2018 Ford Fusion: What You Need to Knowon July 2, 2019 at 12:26 pm
The 2018 Fusion has a slightly above-average predicted reliability rating of 3.5 out of five from J.D. Power. The 2018 Ford Fusion is available in five trim levels: S, SE, Titanium, Platinum, and V6 ... […]
- Advances in plasma and fusion science profiled in PPPL's Quest magazineon July 1, 2019 at 11:56 am
The power that drives the sun Fusion, the power that drives the sun and stars, fuses light elements and releases energy. If scientists can capture and control fusion on Earth, the process could ... […]
- Earth to Mars in 100 days: The power of nuclear rocketson July 1, 2019 at 6:46 am
Nuclear fission is one way to harness the power of the atom. Of course, it requires enriched uranium and generates toxic radioactive waste. What about fusion, in which atoms of hydrogen are ... […]
- A ‘significant leap’ in experiments at nuclear fusion project based at General Atomicson June 28, 2019 at 11:42 am
No commercial nuclear fusion reactors exist and fusion power has been generated only for short periods in a handful of fusion research facilities worldwide. But if the advantages seen by Super-H Mode ... […]
- Boston Tech Watch: Vaxess, Fusion Power, Wayfair & MassChallengeon June 28, 2019 at 3:11 am
An acquisition, accelerator awards, access to venture capital, and arguments over e-commerce sales to migrant detention centers. All that and more in this week’s Boston tech news. Read on for ... […]
- Commonwealth Fusion Plugs in $115M To Develop Nuclear Reactoron June 27, 2019 at 4:49 pm
... closed a $115 million Series A funding round to beef up work on the demonstration fusion reactor power plant it hopes could one day be a breakthrough in the fight against climate change. ... […]
- Commonwealth Fusion Systems Raises $115 Million and Closes Series A Round to Commercialize Fusion Energyon June 27, 2019 at 2:08 pm
Financing will support technology development of SPARC, the world's first system to prove the viability of commercial fusion power CAMBRIDGE, Mass., June 27, 2019 /PRNewswire/ -- Commonwealth ... […]
- Commonwealth Fusion Systems closes $115M round to commercialize fusion energyon June 27, 2019 at 10:23 am
"CFS is on track to commercialize fusion and deliver an inherently safe, globally scalable, carbon-free, and limitless energy source." The financing will support the development of what the company ... […]
- A Boston startup developing a nuclear fusion reactor just got a roughly $50 million booston June 27, 2019 at 9:32 am
Commonwealth Fusion Systems is the fruit of that research. It’s a startup building on decades of research and development that plans to harness the power of the sun to create a cleaner ... […]
via Bing News