Researchers at the University of Illinois at Urbana-Champaign use a printing process to assemble tiny cells into multilayer stacks for extraordinary levels of photovoltaic conversion efficiency – 36.5%.
As an energy source, the Sun has always been a dependable provider. Although it freely shines on everyone, the ability to capture and convert the Sun’s abundant energy is anything but free. However, new technologies aimed at achieving “full spectrum” operation in utility-scale photovoltaics may soon make solar energy a viable option.
“A few simple ideas in materials science and device assembly allow us to bypass many of the limitations of traditional photovoltaic technologies,” explained John Rogers, whose research group is developing these concepts. As a result of these new efficiencies, external industry experts project solar energy electricity generation costs that can reach, without subsidies, levels that are lower than coal, natural gas, and nuclear.
A Swanlund Chair and professor of materials science and engineering, Rogers is a pioneer in semiconductor devices and manufacturing techniques. A printing approach, developed by Rogers and colleagues at Illinois, allows manipulation of ultrathin, small semiconductor elements that can be stacked on top of one another to yield an unusual type of solar cell capable of operating across the entire solar spectrum at exceptionally high efficiency.
“The strategy involves high-speed, printing-based manipulation of thin, microscale solar cells and new interface materials to bond them into multilayer stacks,” Rogers said. “Quadruple-junction, four-terminal solar cells that we can build in this way have individually measured efficiencies of 43.9 percent.”
“This is a high-throughput, parallel assembly process that allows for simultaneous formation of arrays of stacked multi-junction cells in a fully automated step-and-repeat mode with high yields—greater than 95 percent—and accurate overlay registration. A newly developed interfacial material for these stacks enables ideal optical, electrical, and thermal properties. ” stated Xing Sheng, a postdoctoral fellow with Rogers’ research group and first author of the paper, “Printing-based assembly of quadruple-junction four-terminal microscale solar cells allows realization of extremely high-efficiency modules,” published this week in the journal Nature Materials.
The project involved a collaborative team of researchers at the University of Illinois and the photovoltaic companies Semprius and Solar Junction. According to the group’s paper, the module’s top cell consists of a three-junction (3J) microcell with its own anti-reflective coating to ensure efficient transmission of light to the uppermost layers. The bottom cell uses a diffused-junction germanium (Ge) architecture. In a stacked 3J/Ge assembly, the top 3J cell captures light with wavelengths between 300 nm and 1,300 nm. Wavelengths from 1,300 nm to 1,700 nm pass through to the bottom Ge cell with minimal interface reflections, due to the use of a thin layer of a unique type of chalcogenide glass.
“We integrated these microscale, multijunction cells into Semprius’ dual-stage optics—consisting of a molded primary lens and a secondary, miniature ball lens—to tightly focus incident sunlight by more than one thousand times,” Rogers said. “Advanced packaging techniques and electrical matching networks yield fully integrated modules with efficiencies of 36.5 percent evaluated under practical conditions—significantly better than any other available technology.”
“This is very nice work. The results are impressive, and the schemes appear to provide a route to ultra-high efficiency photovoltaics, with strong potential for utility-scale power generation,” stated Ali Javey, a professor of electrical engineering and computer sciences at the University of California, Berkeley. Javey, who is a program leader for electronic materials at the Lawrence Berkeley National Laboratory and a co-director of the Bay Area Photovoltaics Consortium, was not involved with this research.
The Latest on: Solar energy electricity generation
via Google News
The Latest on: Solar energy electricity generation
- New energy conversion system will bridge gap between renewable energy and power gridon December 3, 2020 at 9:39 am
Engineers at West Virginia University are creating a new energy conversion system that has the potential to bridge renewable energy sources into the existing United States energy infrastructure.
- Long-sought changes to rooftop solar laws offer a new vision of Virginia’s electric gridon December 3, 2020 at 8:32 am
A flood of legislation easing barriers for residents to put solar on their own roofs and in their own backyard has led to what installers, developers and trade organizations describe as a sudden rush ...
- What must be done to use solar and wind in power-to-methanolon December 3, 2020 at 12:32 am
According to a research team from Oxford University, solar and wind may be applied in power-to-methanol projects only if the methanol industry will switch from conventional chemical processes, that ...
- CPS Energy Issues RFP Seeking Solar, Energy Storageon December 2, 2020 at 6:33 am
CPS Energy, a municipally-owned, fully-integrated electric and gas utility, has formally launched a request for proposal (RFP) seeking to add up to 900 MW of solar, 50 MW of energy storage and 500 MW ...
- Jefferson County OKs 75MW solar farm to be purchased by Alliant Energyon December 2, 2020 at 2:30 am
The county’s planning and zoning committee granted a conditional use permit Monday for Crawfish River Solar to construct the project on about 450 acres south of Hwy. 18 in the ...
- How Wind and Solar energy are helping in increasing power generation across the worldon December 1, 2020 at 11:32 pm
According to the report India is also producing 10 per cent of its electricity using wind and solar power while the US makes 12 per cent ...
- CPS Energy launches bidding for massive solar projecton December 1, 2020 at 10:09 am
In addition to calling for proposals on 900 megawatts of solar energy, CPS Energy announced Tuesday that it plans to open bids for the next 10-year phase of its conservation program in January.
- Samson Solar Energy Center: Largest Solar Project in U.S.on December 1, 2020 at 7:17 am
Invenergy, a privately-held global developer and operator of sustainable energy solutions, recently announced a 1,310-megawatt solar energy generation facility that will be the largest in the United ...
- Solar Power Booms in Texason November 28, 2020 at 1:00 pm
Wind power made Texas the leading renewable-energy producer in the U.S. Now solar is fast catching up.
- NV Energy Continues to Bring Benefits of Solar Energy to Customerson November 25, 2020 at 10:00 am
Today, the Public Utilities Commission of Nevada (PUCN) approved a stipulation agreement between NV Energy, the Regulatory Operations Staff of the PUCN, Bureau of Consumer Protection and other ...
via Bing News