New system aims to harness the full spectrum of available solar radiation – “This is the first device that is able to do all these things at the same time”
The key to creating a material that would be ideal for converting solar energy to heat is tuning the material’s spectrum of absorption just right: It should absorb virtually all wavelengths of light that reach Earth’s surface from the sun — but not much of the rest of the spectrum, since that would increase the energy that is reradiated by the material, and thus lost to the conversion process.
Now researchers at MIT say they have accomplished the development of a material that comes very close to the “ideal” for solar absorption. The material is a two-dimensional metallic dielectric photonic crystal, and has the additional benefits of absorbing sunlight from a wide range of angles and withstanding extremely high temperatures. Perhaps most importantly, the material can also be made cheaply at large scales.
The creation of this material is described in a paper published in the journal Advanced Materials, co-authored by MIT postdoc Jeffrey Chou, professors Marin Soljacic, Nicholas Fang, Evelyn Wang, and Sang-Gook Kim, and five others.
The material works as part of a solar-thermophotovoltaic (STPV) device: The sunlight’s energy is first converted to heat, which then causes the material to glow, emitting light that can, in turn, be converted to an electric current.
Some members of the team worked on an earlier STPV device that took the form of hollow cavities, explains Chou, of MIT’s Department of Mechanical Engineering, who is the paper’s lead author. “They were empty, there was air inside,” he says. “No one had tried putting a dielectric material inside, so we tried that and saw some interesting properties.”
When harnessing solar energy, “you want to trap it and keep it there,” Chou says; getting just the right spectrum of both absorption and emission is essential to efficient STPV performance.
Most of the sun’s energy reaches us within a specific band of wavelengths, Chou explains, ranging from the ultraviolet through visible light and into the near-infrared. “It’s a very specific window that you want to absorb in,” he says. “We built this structure, and found that it had a very good absorption spectrum, just what we wanted.”
In addition, the absorption characteristics can be controlled with great precision: The material is made from a collection of nanocavities, and “you can tune the absorption just by changing the size of the nanocavities,” Chou says.
Another key characteristic of the new material, Chou says, is that it is well matched to existing manufacturing technology. “This is the first-ever device of this kind that can be fabricated with a method based on current … techniques, which means it’s able to be manufactured on silicon wafer scales,” Chou says — up to 12 inches on a side. Earlier lab demonstrations of similar systems could only produce devices a few centimeters on a side with expensive metal substrates, so were not suitable for scaling up to commercial production, he says.
In order to take maximum advantage of systems that concentrate sunlight using mirrors, the material must be capable of surviving unscathed under very high temperatures, Chou says. The new material has already demonstrated that it can endure a temperature of 1,000 degrees Celsius (1,832 degrees Fahrenheit) for a period of 24 hours without severe degradation.
And since the new material can absorb sunlight efficiently from a wide range of angles, Chou says, “we don’t really need solar trackers” — which would add greatly to the complexity and expense of a solar power system.
“This is the first device that is able to do all these things at the same time,” Chou says. “It has all these ideal properties.”
The Latest on: Solar absorber
via Google News
The Latest on: Solar absorber
- Perovskite solar pushes up efficiency in hydrogen-making cellon June 23, 2020 at 8:45 am
“Modelling and analysis of the dual-absorber stand-alone photo-electro-chemical system shows that there are ample opportunities for further optimisation of the materials and performance, with a ...
- Low-cost direct solar-to-hydrogen ambitions see the lighton June 21, 2020 at 11:54 pm
The introduction to the paper – which bears the catchy title Over 17% Efficiency Stand-Alone Solar Water Splitting Enabled by Perovskite-Silicon Tandem Absorbers – explains the PEC cell ...
- Low-cost solar-to-hydrogen cell achieves breakthrough 17.6% efficiencyon June 18, 2020 at 6:16 pm
Hydrogen's impressive energy density offers some compelling advantages that could see it make a huge difference in the electric aviation and eVTOL sectors, as well as in renewable energy, where it's a ...
- Vapor fix lifts up perovskite crystal performanceon June 18, 2020 at 10:40 am
A simple and noninvasive treatment could become a prime post-crystallization process to optimize the optoelectronic properties of hybrid perovskite solar cell materials.
- Laser Etches Solar Absorbing Materialon June 13, 2020 at 5:00 pm
But [Chunlei Guo], a professor at the University of Rochester, has a powerful femto-second pulse laser and used it to create what might be the perfect solar absorber. You can see a video about the ...
- Savosolar wins tender to deliver two solar heating plants to NewHeat in Franceon June 10, 2020 at 11:30 pm
Solar thermal plant for district heating in ... The company’s collectors are equipped with the patented nano-coated direct flow absorbers, and with this leading technology, Savosolar helps ...
- Savosolar Plc – Managers’ Transaction, Mikael Lemström, June 2020on June 10, 2020 at 12:00 am
Savosolar with its highly efficient collectors and large-scale solar thermal systems has taken ... with the patented nano-coated direct flow absorbers, and with this leading technology, Savosolar ...
- The Case for Climate Pragmatismon June 8, 2020 at 9:06 pm
Meanwhile, thanks to the loss of ice in the Arctic Ocean, that once shiny ice mirror, which used to bounce solar energy back into space, is now transforming into a dark heat absorber, itself leading ...
- Precision spray coating could enable solar cells with better performance and stabilityon June 3, 2020 at 10:07 am
Pinsuwan, P. Kumnorkaew, P. Ruankham, P. Kanjanaboos, "Layer-by-layer spray coating of a stacked perovskite absorber for perovskite solar cells with better performance and stability under humid ...
- Five Takeaways: Early Moves and Current Trends in Energy Storageon May 29, 2020 at 1:45 pm
Batteries Can Now Serve as “Shock Absorbers” for the Grid Batteries are capable of doing much more than just “energy shifting,” where a developer simply stores energy from a solar project ...
via Bing News