“That raises the theoretical efficiency of the cell to 80 percent, which is quite remarkable.”
Scientists have created a heat-resistant thermal emitter that could significantly improve the efficiency of solar cells. The novel component is designed to convert heat from the sun into infrared light, which can than be absorbed by solar cells to make electricity – a technology known as thermophotovoltaics. Unlike earlier prototypes that fell apart at temperatures below 2200 degrees Fahrenheit (1200 degrees Celsius), the new thermal emitter remains stable at temperatures as high as 2500 F (1400 C). “This is a record performance in terms of thermal stability and a major advance for the field of thermophotovoltaics,” said Shanhui Fan, a professor of electrical engineering at Stanford University.
Fan and his colleagues at the University of Illinois-Urbana Champaign (Illinois) and North Carolina State University collaborated on the project. Their results are published in the October 16 edition of the journal Nature Communications. A typical solar cell has a silicon semiconductor that absorbs sunlight directly and converts it into electrical energy. But silicon semiconductors only respond to infrared light. Higher-energy light waves, including most of the visible light spectrum, are wasted as heat, while lower-energy waves simply pass through the solar panel. “In theory, conventional single-junction solar cells can only achieve an efficiency level of about 34 percent, but in practice they don’t achieve that,” said study co-author Paul Braun, a professor of materials science at Illinois. “That’s because they throw away the majority of the sun’s energy.”
Thermophotovoltaic devices are designed to overcome that limitation. Instead of sending sunlight directly to the solar cell, thermophotovoltaic systems have an intermediate component that consists of two parts: an absorber that heats up when exposed to sunlight, and an emitter that converts the heat to infrared light, which is then beamed to the solar cell. “Essentially, we tailor the light to shorter wavelengths that are ideal for driving a solar cell,” Fan said. “That raises the theoretical efficiency of the cell to 80 percent, which is quite remarkable.” So far, thermophotovoltaic systems have only achieved an efficiency level of about 8 percent, Braun noted. The poor performance is largely due to problems with the intermediate component, which is typically made of tungsten – an abundant material also used in conventional light bulbs. “Our thermal emitters have a complex, three-dimensional nanostructure that has to withstand temperatures above 1800 F (1000 C) to be practical,” Braun explained. “In fact, the hotter the better.”
In previous experiments, however, the 3D structure of the emitter was destroyed at temperatures of around 1800 F (1000 C). To address the problem, Braun and his Illinois colleagues coated tungsten emitters in a nanolayer of a ceramic material called hafnium dioxide. The results were dramatic. When subjected to temperatures of 1800 F (1000 C), the ceramic-coated emitters retained their structural integrity for more than 12 hours. When heated to 2500 F (1400 C), the samples remained thermally stable for at least an hour. The ceramic-coated emitters were sent to Fan and his colleagues at Stanford, who confirmed that devices were still capable of producing infrared light waves that are ideal for running solar cells.
“These results are unprecedented,” said former Illinois graduate student Kevin Arpin, lead author of the study. “We demonstrated for the first time that ceramics could help advance thermophotovoltaics as well other areas of research, including energy harvesting from waste heat, high-temperature catalysis and electrochemical energy storage.”
Go deeper with Bing News on:
- Understanding Transport Processes on the Nanoscale for Energy Harvesting Deviceson January 28, 2020 at 10:20 pm
Topics include fundamental studies, materials design and device design for the optimization of energy harvesting employing the thermoelectric, thermoionic, thermophotovoltaic, piezoelectric ...
- Ceramic Converter Tackles Solar Cell Problemon September 18, 2019 at 11:36 am
“That’s because they throw away the majority of the sun’s energy.” ‘TAILOR THE LIGHT’ Thermophotovoltaic devices are designed to overcome that limitation. Instead of sending sunlight ...
- MECH_ENG 495: Nanoscale Thermal Transporton May 6, 2019 at 11:47 am
The answers to these questions will provide a basis for understanding the conduction of thermal energy in solid-state nanomaterials, and the design and control of thermal processes in heat-transfer, ...
Go deeper with Google Headlines on:
Go deeper with Bing News on:
Solar cell efficiency
- Organic small molecule hole-transporting layers toward efficient p-i-n perovskite solar cellson May 13, 2020 at 8:27 am
Perovskite solar cells (pero-SCs) show great potential in photoelectric fields due to high power conversion efficiency (PCE), simple processing technology, low fabrication cost, etc.. Recently, the ...
- Solar panels are more efficient than you’ve heard. This material could make them even better.on May 13, 2020 at 12:59 am
Today’s typical silicon solar panels operate at around 22 percent efficiency, but a new crystalline material called perovskite could soon raise the solar efficiency bar much further.
- Our ‘zombie’ solar cells could power indoor devices without sunlighton May 12, 2020 at 8:30 am
To avoid this but still make the Internet of Things possible, my colleagues and I are helping develop a new type of smart solar cell that can adapt to the amount of available light, meaning it can ...
- Ultra-Thin Solar Cells Market to Boom with 56.9% CAGR in Coming Years: P&S Intelligenceon May 11, 2020 at 11:45 pm
The requirement for energy, which doesn't release harmful gases, including carbon dioxide and carbon monoxide, during generation, ...
- Indoor perovskite solar cells pack high efficiency in artificial lighton May 11, 2020 at 11:30 pm
It might sound counterintuitive to put solar cells indoors, but there’s still plenty of light energy inside that’s largely going to waste. Now, a team of engineers is claiming to have created flexible ...