A new circuit layout makes it robust against cuts, damage, and removed areas.
If a pair of long pants is too long, it is cut to length. A board that does not fit into a bookcase is sawed to the right length. People often customize the size and shape of materials like textiles and wood without turning to specialists like tailors or carpenters. In the future this should be possible with electronics, according to the vision of computer scientists from Saarbrücken. Together with researchers from the MIT Media Lab, they developed a printable multi-touch sensor whose shape and size everybody can alter. A new circuit layout makes it robust against cuts, damage, and removed areas.
Today the researchers are presenting their work at the conference “User Interface and Technology” (UIST) in St. Andrews, Scotland.
“Imagine a kid takes our sensor film and cuts out a flower with stem and leaves. If you touch the blossom with a finger, you hear the buzzing of a bumblebee,” Jürgen Steimle says. He reports that programs and apps are easily imaginable to help parents connect touching a sensor film with the suitable sound effect. Steimle, 33, has a doctoral degree in computer science and is doing research at the Max-Planck Institute for Informatics. He also heads the Embodied Interaction research group at the Cluster of Excellence on Multimodal Computing and Interaction.
Simon Olberding is the doctoral candidate and the lead developer of the new sensor. He sees a further application of the new technology in so-called interactive walls used for discussions and brainstorming. “So far, such a wall frays and scuffs quickly as we hammer nails into it, stick notes or posters on it, and damage it while removing them. By customizing and pasting on our new sensor you can make every surface interactive no matter if it is the wristband of a watch, a cloth on a trade fair table, or wallpaper,” Olberding says.
As basic technology the scientists use so-called “printed electronics.” This term summarizes electrical components and devices which are printed. The approach is similar to that of inkjet printers. Instead of printing with normal ink, electrically-functional electronic ink is printed on flexible, thin films (so-called substrates). “The factory costs are so low that printing our DIN A4 film on our special printer in the lab costs us about one US dollar,” Steimle says.
But you need more than printed electronics to make a sensor robust against cuts, damage, and removed areas. So far the circuit layout of a multi-touch sensor has been similar to graph paper. The wires run horizontally, vertically, and parallel to each other. At the intersection of one parallel and one horizontal layer you find the touch-sensitive electrodes. Via the wires they are connected to a controller. This type of layout requires only a minimal number of wires, but is not robust. Since each wire addresses several electrodes, a small cut has a huge effect: many electrodes become unusable and possibly large sensor areas do not work anymore. “It was not easy to find an alternative layout, robust enough for our approach,” Olberding says. They took their inspiration from nature, looking at the human nerve system and fungal root networks, and thus came up with two basic layouts. The so-called star topology has the controller in the center. It is connected to every electrode separately. The so-called tree topology also has the controller in its center connected to each electrode separately. But the wires are bundled similarly to a tree structure. They all run through a vertical line in the middle and then branch off to reach their electrodes.
The scientists found out that the star topology supports often-used basic forms like triangles, rectangles, or ovals best. Furthermore, it is suitable for shapes commonly used for crafts, like stars, clouds, or hearts. In contrast, with the tree topology it is possible to cut out whole areas. The researchers were also able to combine both layouts in a space-saving way, so that the sensor supports all basic forms.
“We assume that printed sensors will be so inexpensive that multi-touch sensing capability will become an inherent part of the material.
The Latest on: Printed Electronics
- The Impact Project: Multi-Collaborative Work Results in 3D Printed Bionic Handon November 15, 2019 at 12:13 am
Designers for the Impact Project have made a bionic hand in just ten hours. Driven by embedded electronics, this novel device was completely 3D printed and grips objects with a moveable thumb. The ...
- Optomec Extends Production Runtimes for 3D Printed Electronics Solutionson November 14, 2019 at 1:42 pm
Photo courtesy of Optomec, Inc. This latest development will be the focus of Optomec’s presence at the IDTechEx Printed Electronics Show in Santa Clara from November 20-21, 2019, where it will be ...
- Electronics 2.0 featured at the IDTechEx Show! | IDTechEx Research Articleon November 13, 2019 at 2:31 pm
presents the latest emerging technologies at one event. Eight conference tracks, one exhibition, from materials and manufacturing innovations to end user case studies, covering Energy Storage, ...
- All-printed large-scale integrated circuits based on organic electrochemical transistorson November 7, 2019 at 2:16 am
Our findings demonstrate that digital circuits based on organic electrochemical transistors (OECTs) provide a unique bridge between all-printed organic electronics (OEs) and low-cost silicon chip ...
- JLR Printed Electronics Powers Next-Generation in Car Personalizationon November 7, 2019 at 12:00 am
The innovative printed electronics system will also reduce the weight of in-car electronics by up to 60% as wiring, sensors and computing is contained within all non-metal materials, removing the need ...
- JLR eyes printed electronics displays and colour changing interior panelson November 5, 2019 at 1:48 am
The innovative printed electronics system would also reduce the weight of car electronics by up to 60% as wiring, sensors and computing are contained within all non-metal materials, removing the need ...
- Global Printed Electronics Market Analysis, Trends, and Forecasts Report 2019-2025on October 30, 2019 at 3:15 am
Dublin, Oct. 30, 2019 (GLOBE NEWSWIRE) -- The "Printed Electronics - Market Analysis, Trends, and Forecasts" report has been added to ResearchAndMarkets.com's offering. The Printed Electronics market ...
- Form AND Function with 3D Electronics: Have Your Cake and Eat It | IDTechEx Research Articleon October 30, 2019 at 2:46 am
You shift the battleground to competing on a new frontier. Those in the flexible and printed electronics industry are among the pioneers of radically shifting the battleground to the surprisingly ...
- 3D Printed Electronics Market (27.8% CAGR) 2018-2026: Global Business Growth, Size and Forecaston October 24, 2019 at 12:52 am
Oct 24, 2019 (AmericaNewsHour) -- According to a new market report published by Credence Research, Inc., the global 3D printed electronics market is expected to grow by 27.8 per cent CAGR during the ...
- 3D Printed Electronics Market (27.8% CAGR) 2018–2026: Global Business Growth, Size and Forecaston October 24, 2019 at 12:08 am
According to a new market report published by Credence Research, Inc., the global 3D printed electronics market is expected to grow by 27.8 per cent CAGR during the forecast period from 2018 to 2026.
via Google News and Bing News