The lightweight skeletons of organisms such as sea sponges display a strength that far exceeds that of manmade products constructed from similar materials.
Scientists have long suspected that the difference has to do with the hierarchical architecture of the biological materials—the way the silica-based skeletons are built up from different structural elements, some of which are measured on the scale of billionths of meters, or nanometers. Now engineers at the California Institute of Technology (Caltech) have mimicked such a structure by creating nanostructured, hollow ceramic scaffolds, and have found that the small building blocks, or unit cells, do indeed display remarkable strength and resistance to failure despite being more than 85 percent air.
“Inspired, in part, by hard biological materials and by earlier work by Toby Schaedler and a team from HRL Laboratories, Caltech, and UC Irvine on the fabrication of extremely lightweight microtrusses, we designed architectures with building blocks that are less than five microns long, meaning that they are not resolvable by the human eye,” says Julia R. Greer, professor of materials science and mechanics at Caltech. “Constructing these architectures out of materials with nanometer dimensions has enabled us to decouple the materials’ strength from their density and to fabricate so-called structural metamaterials which are very stiff yet extremely lightweight.”
At the nanometer scale, solids have been shown to exhibit mechanical properties that differ substantially from those displayed by the same materials at larger scales. For example, Greer’s group has shown previously that at the nanoscale, some metals are about 50 times stronger than usual, and some amorphous materials become ductile rather than brittle. “We are capitalizing on these size effects and using them to make real, three-dimensional structures,” Greer says.
In an advance online publication of the journal Nature Materials, Greer and her students describe how the new structures were made and responded to applied forces.
The largest structure the team has fabricated thus far using the new method is a one-millimeter cube. Compression tests on the the entire structure indicate that not only the individual unit cells but also the complete architecture can be endowed with unusually high strength, depending on the material, which suggests that the general fabrication technique the researchers developed could be used to produce lightweight, mechanically robust small-scale components such as batteries, interfaces, catalysts, and implantable biomedical devices.
Greer says the work could fundamentally shift the way people think about the creation of materials. “With this approach, we can really start thinking about designing materials backward,” she says. “I can start with a property and say that I want something that has this strength or this thermal conductivity, for example. Then I can design the optimal architecture with the optimal material at the relevant size and end up with the material I wanted.”
The team first digitally designed a lattice structure featuring repeating octahedral unit cells—a design that mimics the type of periodic lattice structure seen in diatoms. Next, the researchers used a technique called two-photon lithography to turn that design into a three-dimensional polymer lattice. Then they uniformly coated that polymer lattice with thin layers of the ceramic material titanium nitride (TiN) and removed the polymer core, leaving a ceramic nanolattice. The lattice is constructed of hollow struts with walls no thicker than 75 nanometers.
“We are now able to design exactly the structure that we want to replicate and then process it in such a way that it’s made out of almost any material class we’d like—for example, metals, ceramics, or semiconductors—at the right dimensions,” Greer says.
The Latest on: Structural metamaterials
- Acoustic waveguide with virtual soft boundary based on metamaterialson January 22, 2020 at 2:29 am
As mentioned above, the novel features of acoustic metamaterials have been used to construct waveguides with special functions. Nevertheless, these methods always encounter two problems: the acoustic ...
- Saddle-shaped origami enables new microelectronic applicationson November 20, 2019 at 9:31 am
Now NSF-funded researchers at Georgia Tech and their collaborators are investigating the shape with an eye toward leveraging its structural properties, hoping to find ways to harness its bistability ...
- Active control on switchable waveguide of elastic wave metamaterials with the 3D printing technologyon November 7, 2019 at 3:01 am
The structural optimization by the optimization ... will be localized near the defects of phononic crystals and metamaterials. This is the purpose to design this structure and the responses ...
- Hyperbolic Paraboloid Origami Harnesses Bistability to Enable New Applicationson September 17, 2019 at 8:52 am
“As an origami pattern, it has structural bistability which could be harnessed for metamaterials used in energy trapping or other microelectronic devices.” Structural bistability refers to the origami ...
- Beyond metamaterials: Designing novel optical materials from Angstrom-scale interactionson August 31, 2019 at 5:00 pm
Light-matter interactions in the nanoscale can be engineered with metamaterials, by controlling the structural complexity of materials systems. However, practical fabrication limitations do not allow ...
- Data-Based Design Method for Metamaterials Uses Artificial Intelligenceon July 19, 2019 at 9:36 am
The researchers used a deep-learning-assisted inverse design method to enable structural parameters and material for metamaterials to be designed simultaneously and with a greater degree of freedom.
- Study says ancient Romans may have built “invisibility cloaks” into structureson May 3, 2019 at 11:55 am
It may also be possible to use metamaterials to lessen the damage caused to buildings and other infrastructure from earthquakes, by redirecting so-called Rayleigh waves, the more shallow, surface ...
- Exceptional Metamaterials Are Reconfigurable & Deployable Through 4D Printingon April 9, 2019 at 12:35 pm
Electromagnetic Acoustic Mechanical Thermal “The properties of mechanical metamaterials emerge from the 3D spatial arrangement of the micro-structural elements. Therefore, once manufactured ...
- Innovation through Bio-inspired Metamaterialson April 2, 2019 at 5:00 pm
mimicked its structural pattern when making their own metamaterials. “A lot of researchers find inspiration in their daily lives, sometimes it’s a random occurrence or thought that connects two ideas ...
- A full gamut of colors in all-dielectric, cheap, and large-scale artificial butterfly wingson May 11, 2018 at 9:33 am
Figure 1. Intricate meso-scale internal structure of the all-dielectric porous metamaterials enables structural color formation akin to that displayed by colorful butterfly wings. (Image: MIT) To ...
via Google News and Bing News