A new material built from aluminum and antimony shows promise for next-generation data-storage devices
A new, environmentally-friendly electronic alloy consisting of 50 aluminum atoms bound to 50 atoms of antimony may be promising for building next-generation “phase-change” memory devices, which may be the data-storage technology of the future, according to a new paper published in the journal Applied Physics Letters, which is produced by AIP Publishing.
Phase-change memory is being actively pursued as an alternative to the ubiquitous flash memory for data storage applications, because flash memory is limited in its storage density and phase-change memory can operate much faster.
Phase-change memory relies on materials that change from a disordered, amorphous structure to a crystalline structure when an electrical pulse is applied. The material has high electrical resistance in its amorphous state and low resistance in its crystalline state — corresponding to the 1 and 0 states of binary data.
Flash memory has problems when devices get smaller than 20 nanometers. But a phase-change memory device can be less than 10 nanometers — allowing more memory to be squeezed into tinier spaces. “That’s the most important feature of this kind of memory,” said Xilin Zhou of the Shanghai Institute of Microsystem and Information Technology at the Chinese Academy of Sciences. Data can also be written into phase-change memories very quickly and the devices would be relatively inexpensive, he added.
So far, the most popular material for phase-change memory devices contains germanium, antimony, and tellurium. But compounds with three elements are more difficult to work with, Zhou said.
“It’s difficult to control the phase-change memory manufacturing process of ternary alloys such as the traditionally used germanium-antimony-tellurium material. Etching and polishing of the material with chalcogens can change the material’s composition, due to the motion of the tellurium atoms,” explained Zhou.
Zhou and his colleagues turned to a material with just two elements: aluminum and antimony. They studied the material’s phase-changing properties, finding that it’s more thermally stable than the Ge-Sb-Te compound. The researchers discovered that Al50Sb50, in particular, has three distinct levels of resistance — and thus the ability to store three bits of data in a single memory cell, instead of just two. This suggests that this material can be used for multilevel data storage.
“A two-step resistance drop during the crystallization of the material can be used for multilevel data storage (MLS) and, interestingly, three distinct resistance levels are achieved in the phase-change memory cells,” Zhou says. “So the aluminum-antimony material looks promising for use in high-density nonvolatile memory applications because of its good thermal stability and MLS capacity.”
The Latest on: Memory Device
- Reduce Memory Costs and Retain Data at Power Loss with Microchip’s EERAM Memory Solutionson December 2, 2019 at 4:22 pm
EERAM is a standalone nonvolatile RAM memory that uses the same SPI and I 2 C protocols as serial SRAM, enabling devices to retain SRAM content during power loss without using an external battery. All ...
- Shape Memory Medical Receives PMDA Approval for the IMPEDE® Embolization Plug Familyon December 2, 2019 at 4:01 pm
Shape Memory Medical Inc. announced today that its IMPEDE® Embolization Plugs have been approved in Japan by the Pharmaceuticals and Medical Devices Agency (PMDA). Cosmotec, which is a Group Company ...
- Cyber Monday Deal: Get a New Nintendo Switch V2 Memory Card and Controller Bundle for $299on December 2, 2019 at 10:07 am
This brand new Nintendo Switch (the V2, with better battery life) comes with a 128GB memory card, and an Ematic controller, so you'll be ready to hit the ground running with the best portable gaming ...
- Monitoring medical device advanceson December 2, 2019 at 5:38 am
The medical electronics market, including sensors, memory devices, microcontrollers, batteries, and displays for wired and wireless medical imaging, monitoring, and implantable devices, is expected to ...
- New electro-optical nanoscale device could lead to faster processorson December 1, 2019 at 7:13 am
This electro-optical device is a bridge between traditional electronic computing and the emerging field of optical computing, and it could lead to faster and more energy-efficient processors and ...
- Spotted at Supercomputing 2019: A 256 GB Gen-Z Memory Moduleon November 29, 2019 at 8:00 am
What we had in front of us was actually a dummy unit for show purposes, but it is a 3-inch wide memory device that adds additional distributed memory to the network such that different nodes can take ...
- Logic Gate Functions Build with Nonvolatile Resistive Switching and Thermoresponsive Memory Based on Biologic Proteinson November 27, 2019 at 11:26 am
Logic gate functions build with nonvolatile resistive switching and thermoresponsive memory based on biologic proteins was investigated. The “NAND” and “NOR” function of logic gate in soya protein ...
- 3 more emerging memory technologies tackling big-data bottleneckson November 26, 2019 at 9:55 am
The volume of data created by mostly-connected systems in 2023 is forecast to be 10 times larger than in 2014, with more than half from endpoint IoT devices. The traditional storage hierarchy is ...
- Russians Build Device That Imitates Biological Memoryon November 25, 2019 at 2:55 pm
Researchers in Moscow have made advances to a device called a memristor, building one that works like a synapse in the human brain. “Memristor” means both memory and resistor, a term coined in 1971 ...
- Novel memory device can be written on and read out optically or electricallyon November 25, 2019 at 12:14 pm
Since October 2019 SweepMe! is available worldwide free of charge. Technische Universität Dresden. (2019, November 25). Novel memory device can be written on and read out optically or electrically.
via Google News and Bing News