Unprecedented fill factors of 80 percent come close to that of silicon solar cells
Energy consumption is growing rapidly in the 21st century, with rising energy costs and sustainability issues greatly impacting the quality of human life. Harvesting energy directly from sunlight to generate electricity using photovoltaic technologies is considered to be one of the most promising opportunities to produce electricity in an environmentally benign fashion.
Among the various photovoltaic technologies, polymer (plastic) solar cells offer unique attractions and opportunities. These solar cells contain Earth-abundant and environmentally benign materials, can be made flexible and lightweight, and can be fabricated using roll-to-roll technologies similar to how newspapers are printed. But the challenge has been improving the cells’ power-conversion efficiency.
Now a research team of faculty members and students led by Professor Tobin J. Marks of Northwestern University reports the design and synthesis of new polymer semiconductors and reports the realization of polymer solar cells with fill factors of 80 percent — a first. This number is close to that of silicon solar cells.
“Our results indicate that the power-conversion efficiency achievable with polymer solar cells may be far beyond the current levels, heralding a bright future for this technology,” Marks said. “With our high fill factors, polymers with very good but not champion light absorption still are able to achieve very good efficiency.”
Marks is the Vladimir N. Ipatieff Research Professor of Chemistry in the Weinberg College of Arts and Sciences and Professor of Materials Science and Engineering in the McCormick School of Engineering and Applied Science.
The study was published Aug. 11 by the journal Nature Photonics.
The team showed that the exceptional fill factors arise from high levels of order in the mixture of polymer donor chains and buckyball acceptor components, the way these two components are distributed within the cell active layer, and a “face-on” orientation of the polymer chains on the electrode surface.
The fill factor achieved is more than 10 percent greater than previously achieved by the polymer solar cell community, and, in the present study, although the polymer semiconductors have non-optimal light absorption characteristics, a near-record power-conversion efficiency as high as 8.7 percent is still obtained.
The working principle of polymer solar cells differs greatly from that of traditional silicon solar cells. The active layers of polymer solar cells typically contain a mixture of polymer chains that can donate electrons and “buckyball” molecules that accept electrons. (Buckminsterfullerene, or buckyball, is a spherical fullerene molecule with the formula C60.)
Under solar irradiation, electronic excitation generates mobile electron-hole pairs called excitons. The excitons then diffuse through the active layer of the cell, separating at donor-acceptor interfaces into free charge carriers (electrons and holes) that are collected as electrical current when they reach the cell electrodes.
In spite of the attractions of polymer solar cells, their large-scale application has been limited by the relatively low power-conversion efficiency, which is defined as the percentage of the power generated by the cell versus the power of the incident sunlight. The power produced by a solar cell is the product of three cell performance parameters: the open circuit voltage, the short circuit current and the fill factor. Various strategies now are being developed to increase these parameters to maximize the power-conversion efficiency of the cells.
While there are reliable approaches to increase the cell’s open circuit voltage and short circuit current, the realization of high fill factors has proven elusive, with fill factors of most polymer solar cells typically well below 70 percent, versus 80 percent for conventional silicon solar cells.
In polymer solar cells, achieving high fill factors is largely prevented by the recombination (self-annihilation) of the photogenerated electron-hole pairs before they reach the cell electrodes to be collected as current. In typical polymer solar cells, the randomly distributed donor and acceptor components lead to formation of disordered domains and isolated islands, as well as energy-wasting contacts with the electrodes. Such disordered structures combined with low mobilities of holes and electrons in such materials means that many recombine before they can be swept to the electrodes for collection.
Decoding and implementing design principles that produce high fill factors thus represents a significant advance in polymer solar cell technology.
The Latest Bing News on:
Plastic Solar Cells
- Tandem Pictures Co-Heads Push for Sustainability in Indie Filmmakingon December 4, 2020 at 12:59 pm
It’s so hard to get everyone rallying around it at the indie film level. If you look at the thousands of indie films and indie web series created every year, I would imagine it’s a very small percent ...
- Working (really) remotely with the Jackery Portable Power Stationon December 4, 2020 at 9:33 am
By need or by choice, remote working might mean time away from a power outlet. The Jackery Power Station may be just what you need to do so.
- Northwestern’s ISEN integrates multidisciplinary lab space for sustainability solutionson December 4, 2020 at 9:21 am
By Emily Little Medill Reports Finding solutions to climate science takes multi-faceted collaboration from physicists, chemists, earth scientists and engineers in several different fields. The ...
- Adaptive solar shade system means horticulturalists can smell the roseson December 3, 2020 at 11:10 pm
Researchers have modeled the effects of various PV module arrangements on a greenhouse used for rose growing in Iran's Shiraz region. The team determined a 'sweet spot' where modules produced the most ...
- SolarWindow Has An Intriguing Story And An Expensive Stockon December 3, 2020 at 11:52 am
Stock Market News, Stock Advice & Trading Tips SolarWindow Technologies (OTCMKTS:WNDW) illustrates the potential, and the ...
- Meet the School Girl Who Won a Global Award For Designing a Solar Ironing Carton December 2, 2020 at 7:28 am
Vinisha hopes to use her Children’s Climate Prize money to deploy a few ironing carts in her hometown and get feedback from the ironwalas.
- New Technology Keeps Solar on Trackon November 30, 2020 at 8:04 pm
Researchers continue to work on improvements in solar power, developing better cells, using new materials in panels, and focusing on improving efficiency while lowering cost. The solar power industry ...
- Indorama wins 'Blue Loan' to support plastic pollution mitigation effortson November 25, 2020 at 3:54 am
For the first time, a plastic resin manufacturer has become the recipient of a "Blue Loan," a program from the International Finance Corp.that supports sustainability efforts focused on the world's ...
- The Indian school where students pay for lessons with plastic wasteon November 24, 2020 at 11:26 pm
Villagers once burned the toxic waste as fuel, but a pioneering couple’s radical education model uses it much more creatively ...
- Global Photovoltaic Solar Panel Market 2020-2024: Size, Share, Emerging Trends, Demand, Revenue and Forecasts Researchon November 23, 2020 at 7:30 am
Global “Photovoltaic Solar Panel Market ” report presents a complete overview, market shares, and growth opportunities ...
The Latest Google Headlines on:
Plastic Solar Cells
The Latest Bing News on:
Polymer solar cells
- Energy-generating synthetic skin for affordable prosthetic limbs and touch-sensitive robotson November 30, 2020 at 5:07 am
A new type of energy-generating synthetic skin could create more affordable prosthetic limbs and robots capable of mimicking the sense of touch, scientists say.
- Infrared LEDs And Solar Cells Give Robots A Sense Of Touchon November 30, 2020 at 3:30 am
In an early-view paper published in the journal IEEE Transactions on Robotics, researchers from the University of Glasgow describe how a robotic hand wrapped in their flexible solar skin is capable of ...
- Energy-creating synthetic skinon November 29, 2020 at 4:00 pm
Instead, the skin puts the array of miniaturised solar cells integrated on its soft polymer surface to a clever dual use. The cells generate enough energy to power the micro-actuators which control ...
- Solar-powered ‘skin’ mimics sense of touch and could revolutionise prosthetic limbson November 27, 2020 at 10:14 pm
The hand has been taught to grasp objects such as rubber balls and when deployed on a robot arm can be used to detect unexpected objects ...
- DIO additives contribute to efficiency of polymer solar cellson November 27, 2020 at 9:23 am
Recently, researchers from the Shanghai Institute of Optics and Fine Mechanics of the Chinese Academy of Sciences (CAS) have made progress in ultrafast dynamics of polymer solar cells (PSCs) with ...
- Conductive Polymer Market share assessments for the regional and country-level segmentson November 25, 2020 at 12:43 am
Research Dive :According to conductive polymer market analysis by Research Dive, the global market size is expected to surpass $7,118.5 million by the end of 2027, at a 7.7% CAGR, growing from $4,842.
- How organic solar cells (really) workon November 24, 2020 at 4:00 pm
A typical organic solar cell consists of two semiconducting layers ... When the cell absorbs light, a photon knocks out an electron in a polymer atom, leaving behind an empty space, which ...
- Cheap and Efficient Organic Solar Cells May Be Possible, Thanks to New AI Toolson November 23, 2020 at 4:00 pm
The graphic shows the exploration of new polymers for polymer solar cells using materials informatics. Researchers at Osaka University in Japan developed an artificial-intelligence predictor for ...
- New “Fuse” Prevents Solar-Panel Fireson November 23, 2020 at 12:00 pm
As the voltages generated by solar panels increase ... It contains a metal spring covered in a self-extinguishing polymer material developed and tested at Sandia over the last five years.