“This could be what it takes to open up an important new industry”
Chemists at Oregon State University have identified a compound that could significantly reduce the cost and potentially enable the mass commercial production of silicon nanostructures – materials that have huge potential in everything from electronics to biomedicine and energy storage.
This extraordinary compound is called table salt.
Simple sodium chloride, most frequently found in a salt shaker, has the ability to solve a key problem in the production of silicon nanostructures, researchers just announced in Scientific Reports, a professional journal.
By melting and absorbing heat at a critical moment during a “magnesiothermic reaction,” the salt prevents the collapse of the valuable nanostructures that researchers are trying to create. The molten salt can then be washed away by dissolving it in water, and it can be recycled and used again.
The concept, surprising in its simplicity, should open the door to wider use of these remarkable materials that have stimulated scientific research all over the world.
“This could be what it takes to open up an important new industry,” said David Xiulei Ji, an assistant professor of chemistry in the OSU College of Science. “There are methods now to create silicon nanostructures, but they are very costly and can only produce tiny amounts.
“The use of salt as a heat scavenger in this process should allow the production of high-quality silicon nanostructures in large quantities at low cost,” he said. “If we can get the cost low enough many new applications may emerge.”
Silicon, the second most abundant element in the Earth’s crust, has already created a revolution in electronics. But silicon nanostructures, which are complex structures much smaller than a speck of dust, have potential that goes far beyond the element itself.
Uses are envisioned in photonics, biological imaging, sensors, drug delivery, thermoelectric materials that can convert heat into electricity, and energy storage.
Batteries are one of the most obvious and possibly first applications that may emerge from this field, Ji said. It should be possible with silicon nanostructures to create batteries – for anything from a cell phone to an electric car – that last nearly twice as long before they need recharging.
Existing technologies to make silicon nanostructures are costly, and simpler technologies in the past would not work because they required such high temperatures. Ji developed a methodology that mixed sodium chloride and magnesium with diatomaceous earth, a cheap and abundant form of silicon.
When the temperature reached 801 degrees centigrade, the salt melted and absorbed heat in the process. This basic chemical concept – a solid melting into a liquid absorbs heat – kept the nanostructure from collapsing.
The sodium chloride did not contaminate or otherwise affect the reaction, researchers said. Scaling reactions such as this up to larger commercial levels should be feasible, they said.
The Latest on: Silicon nanostructures
- Research Spotlight Archive, Nano-Imprint of Photonic-Plasmonic Nanostructures on Novel Polymerson June 21, 2019 at 3:16 am
Current optical platforms are based on widely used substrate such as silicon, quartz and PDMS ... However, the nanofabrication of photonic-plasmonic nanostructures on the top of these ... […]
- Method for Enhanced Synthesis of Carbon Nanostructureson June 19, 2019 at 5:00 pm
Common oxide powders are magnesium oxide, aluminum oxide, silicon(II) oxide, calcium oxide, titanium(II) oxide, and zirconium(II) oxide. An example of a flat substrate would be a silicon wafer, ... […]
- New record efficiency for black silicon solar cellson May 20, 2019 at 5:00 pm
Finland have broken the efficiency record for black silicon solar cells – a type of cell that can gather sunlight even from tight angles – by almost four percent. Black silicon can be manufactured ... […]
- A new low-cost method to mass manufacture nanomaterialson May 16, 2019 at 5:00 pm
Q: Does this method open up new avenues for circuit fabrication? A: Mac-Imprint enables researchers to manufacture 3D microstructures and nanostructures onto silicon with nanometer precision and shape ... […]
- Broadband MIR harvester using silicon nanostructureson April 9, 2019 at 2:02 am
In this work, we propose an all-silicon-based super absorber in the mid infrared (MIR) spectral range. The presented structures are composed of n-doped silicon nanoparticles or nanowires embedded in ... […]
- This Company's Magic Powder Makes Your Phone Run Longeron March 10, 2019 at 11:59 pm
By using ultra-efficient silicon rather than graphite to store the ions that provide the charge, he believed his company, Sila Nanotechnologies, could accelerate the world's transition to renewable ... […]
- Silicon Anodes May Improve Lithium Ion Batterieson February 26, 2019 at 4:38 am
“Therefore, the combination of viscous MXene ink and high-capacity Si demonstrated here offers a powerful technique to construct advanced nanostructures with exceptional performance.” Silicon anodes, ... […]
- Expanding the Use of Silicon in Batteries, By Preventing Electrodes From Expandingon February 21, 2019 at 8:16 am
Substituting silicon for graphite as the primary material in the Li ... and high-capacity Si demonstrated here offers a powerful technique to construct advanced nanostructures with exceptional ... […]
- Luminescent silicon nanostructures Faraday Discussionon February 13, 2019 at 4:00 pm
On behalf of the scientific committee, I extend a warm invitation to you to join us in York in February 2020 for a Faraday Discussion on the theme of Luminescent silicon nanostructures. Faraday ... […]
- Nano-Antennas Based on Silicon-Gold Nanostructureson January 22, 2019 at 4:00 pm
We experimentally realize nano-antennas based on hybrid silicon-gold nanoparticles (NPs). The silicon particles covered by clusters of small metal NPs are fabricated from a liquid phase under the ... […]
via Google News and Bing News