Design may support widespread use of solar and wind energy
MIT researchers have engineered a new rechargeable flow battery that doesn’t rely on expensive membranes to generate and store electricity. The device, they say, may one day enable cheaper, large-scale energy storage.
The palm-sized prototype generates three times as much power per square centimeter as other membraneless systems — a power density that is an order of magnitude higher than that of many lithium-ion batteries and other commercial and experimental energy-storage systems.
The device stores and releases energy in a device that relies on a phenomenon called laminar flow: Two liquids are pumped through a channel, undergoing electrochemical reactions between two electrodes to store or release energy. Under the right conditions, the solutions stream through in parallel, with very little mixing. The flow naturally separates the liquids, without requiring a costly membrane.
The reactants in the battery consist of a liquid bromine solution and hydrogen fuel. The group chose to work with bromine because the chemical is relatively inexpensive and available in large quantities, with more than 243,000 tons produced each year in the United States.
In addition to bromine’s low cost and abundance, the chemical reaction between hydrogen and bromine holds great potential for energy storage. But fuel-cell designs based on hydrogen and bromine have largely had mixed results: Hydrobromic acid tends to eat away at a battery’s membrane, effectively slowing the energy-storing reaction and reducing the battery’s lifetime.
To circumvent these issues, the team landed on a simple solution: Take out the membrane.
“This technology has as much promise as anything else being explored for storage, if not more,” says Cullen Buie, an assistant professor of mechanical engineering at MIT. “Contrary to previous opinions that membraneless systems are purely academic, this system could potentially have a large practical impact.”
Buie, along with Martin Bazant, a professor of chemical engineering, and William Braff, a graduate student in mechanical engineering, have published their results this week inNature Communications.
“Here, we have a system where performance is just as good as previous systems, and now we don’t have to worry about issues of the membrane,” Bazant says. “This is something that can be a quantum leap in energy-storage technology.”
Possible boost for solar and wind energy
Low-cost energy storage has the potential to foster widespread use of renewable energy, such as solar and wind power. To date, such energy sources have been unreliable: Winds can be capricious, and cloudless days are never guaranteed. With cheap energy-storage technologies, renewable energy might be stored and then distributed via the electric grid at times of peak power demand.
“Energy storage is the key enabling technology for renewables,” Buie says. “Until you can make [energy storage] reliable and affordable, it doesn’t matter how cheap and efficient you can make wind and solar, because our grid can’t handle the intermittency of those renewable technologies.”
By designing a flow battery without a membrane, Buie says the group was able to remove two large barriers to energy storage: cost and performance. Membranes are often the most costly component of a battery, and the most unreliable, as they can corrode with repeated exposure to certain reactants.
Braff built a prototype of a flow battery with a small channel between two electrodes. Through the channel, the group pumped liquid bromine over a graphite cathode and hydrobromic acid under a porous anode. At the same time, the researchers flowed hydrogen gas across the anode. The resulting reactions between hydrogen and bromine produced energy in the form of free electrons that can be discharged or released.
The researchers were also able to reverse the chemical reaction within the channel to capture electrons and store energy — a first for any membraneless design.
In experiments, Braff and his colleagues operated the flow battery at room temperature over a range of flow rates and reactant concentrations. They found that the battery produced a maximum power density of 0.795 watts of stored energy per square centimeter.
More storage, less cost
In addition to conducting experiments, the researchers drew up a mathematical model to describe the chemical reactions in a hydrogen-bromine system. Their predictions from the model agreed with their experimental results — an outcome that Bazant sees as promising for the design of future iterations.
“We have a design tool now that gives us confidence that as we try to scale up this system, we can make rational decisions about what the optimal system dimensions should be,” Bazant says. “We believe we can break records of power density with more engineering guided by the model.”
Yury Gogotsi, a professor of materials science and engineering at Drexel University, says eliminating the membrane is the next step toward scalable, inexpensive energy storage. The group’s design, he says, will help engineers better understand the physics of membraneless systems.
“You cannot have an inexpensive energy-storage system by piling up tens of thousands of individual small cells, like cellphone or computer batteries,” says Gogotsi, who did not contribute to the research. “As any new technology, the laminar flow battery will need time to prove its viability. It’s like a newborn baby — we’ll only know what the technology is good for after a few years.”
The Latest on: Large-scale energy storage
- NY Power Authority maps pathway to more sustainable operations advancing state's clean energy goals on June 19, 2019 at 11:02 am
Improve the emissions rate of NYPA’s electricity supply (NYPA generation, contracts and power purchase agreements, and market purchases) through power plant modernization, transmission upgrades, large ... […]
- Shining a light on Australia’s energy future on June 19, 2019 at 7:40 am
Bloomberg says behind-the-meter storage and demand response will ... will spend $US107bn ($156bn) on renewable energy generation. Solar generation for households and business represents $US49bn. Large ... […]
- Flow Battery Market: Ensync Energy Systems (otcmkts:ESNC), Redt Energy, and Gildemeister Energy Solutions on June 18, 2019 at 11:21 pm
Key players profiled in the report include Ensync Energy Systems (otcmkts ... Utilities and Military. By Storage Type this market is segmented on the basis of Large Scale and Compact. By Material Type ... […]
- Energy Dept. Weighs Using Clean Tech Funds to Back a Fossil Fuels Project. Will Congress Stop It? on June 18, 2019 at 1:08 pm
The Energy Department is now considering using that program to support a large-scale underground storage project for ethane, a fossil fuel byproduct used to make plastics. If the loan guarantee ... […]
- World's largest renewable energy storage project announced on June 16, 2019 at 6:48 am
These energy storage technologies include: Renewable hydrogen Compressed Air Energy Storage Large scale flow batteries Solid oxide fuel cells "For 20 years, we've been reducing carbon emissions of the ... […]
- A Californian business is using A.I. to change the way we think about energy storage on June 14, 2019 at 3:19 am
... based Stem is using artificial intelligence to help businesses store energy on a large scale. The idea is to pair artificial intelligence (AI) with energy storage so that businesses and ... […]
- The Global Flywheel Energy Storage Market to 2025 - A $479.3 Million Opportunity, Driven by the Growing Energy Storage & Automobile Industries on June 14, 2019 at 2:11 am
Dublin, June 14, 2019 (GLOBE NEWSWIRE) -- The "Flywheel Energy Storage Market Size ... The market is consolidated with the presence of many small- and large-scale manufacturers. These players adopt ... […]
- CellCube Signs Agreement With Immersa for $6 Million US for Its 4th Generation Energy Storage Systems on June 13, 2019 at 7:40 am
"After signing the distributorship agreement at the beginning of the year (see press January 31,19) and working jointly with Immersa and HICC Energy on a large scale storage deployment we made the ... […]
- Researchers improve power storage capabilities on June 11, 2019 at 6:59 am
Batteries have become more energy efficient over the years ... Solid-state batteries, in spite of potential advantages, have not been produced at a large scale. Reasons include high manufacturing ... […]
- Pumped Hydro Storage Market Predicted to Hit 390 Billion USD by 2024 on June 10, 2019 at 11:12 am
The industry has witnessed strong impact from leading energy storage players including Toshiba, Voith, GE Alstom and Hitachi on account of their extensive innovations and availability of large scale ... […]
via Google News and Bing News