Many aircraft passengers are familiar with the phenomenon; the sky is clear and blue, the aircraft is cruising calmly, but suddenly everything is disrupted by temporary turbulence.
Passengers frequently experience this as a kind of ‘hole in the air’. The reason for this unpleasant change in flight altitude is something known as ‘clear-air turbulence’ (CAT) – turbulence that occurs independently of cloud cover, is invisible and cannot be accurately predicted. For both passengers and crew, strong turbulence can mean an increased risk of falls and accidents. Recent results in atmospheric research indicate that such turbulence will occur more frequently due to climate change and will become even more of a problem for aircraft. However, a method of detecting turbulence has now been developed for the first time, under a European joint project called DELICAT (Demonstration of LIDAR based Clear Air Turbulence detection). The new technology is currently being tested by the German Aerospace Center (Deutsches Zentrum für Luft- und Raumfahrt; DLR) and the project partners. The current measurement flight campaign will take place until the end of August. The flight route starts in Amsterdam and continues throughout Europe.
Origin of turbulence
Wind shear often occurs along the jet stream. This involves extended layers of air that move against each other horizontally at different speeds. Particularly strong wind shear can create waves that ultimately break, like waves on water. When a wave breaks, it either causes vortices in the air, or turbulence – specifically CAT.
When an aircraft encounters this turbulence, it alters the angle of the airflow over the wings; this leads to the familiar changes in lift. CAT has long been an unavoidable phenomenon in aviation, as these swirling air masses in the clear sky are neither visible to the eye nor measurable with sensors.
A solution is on the horizon; in future it might be possible to calculate where air turbulence is, using laser measurements to generate the required data. The idea is to identify, in advance, any minor changes in the density and speed of the air along the flight path and use this to detect and predict CAT from a distance.
Measurement by laser
Researchers at the DLR Institute of Atmospheric Physics have developed a laser-based measurement device to do this. A LIDAR (Light Detection and Ranging) instrument can be installed on board an aircraft and emits short-wave ultraviolet laser radiation along the direction of flight. The density of the air is determined from the backscatter value measured for the air molecules, oxygen and nitrogen. Fluctuations in this density then provide information about the turbulence there. This indirectly acquired information enables analysis of the air in the region the aircraft is about to fly through. In other words, clear air turbulence is made visible in advance along the route.
The Latest on: Detecting turbulence
- Clear Air Turbulence: Detection by Infrared Observations of Water Vaporon December 29, 2019 at 7:50 pm
signal anomalies from 4 to 10 minutes in advance of subsequent encounters with clear air turbulence (CAT). These anomalies are characteristically different from the signals not followed by CAT ...
- Stratodynamics To Test Stratospheric Turbulence Sensing For NASAon November 26, 2019 at 4:00 pm
is to operate research flights for NASA under a contract awarded to the University of Kentucky. The flights to assess new methods of turbulence detection in stratospheric flight with forward-sensing ...
- Mode Selective Up-conversion Detection with Turbulenceon November 24, 2019 at 4:00 pm
while also allowing exceptional flexibility and capabilities in manipulating and detecting overlapping signals, including quantum light at a single photon level. Our experimental results have achieved ...
- Airport Security Equipment Market Player Extends Gains amid Turbulenceon November 20, 2019 at 7:30 am
The Global Airport Security Equipment is segmented by: By Product Types: , Explosives Detection, X-Ray & Infrared Equipment, Metal Detectors, Perimeter & Access Control, Biometrics Equipment, Alarms & ...
- Turbulence-Resistant FSO Communication Using a Few-Mode Pre-Amplified Receiveron November 7, 2019 at 3:01 am
Even though multi-subaperture based digital coherent detection can potentially combat turbulence 23, the implementation is complex and costly. Comparison with adaptive optics using deformable mirrors ...
- Fast Five With Honeywell - Steve Slijepcevicon October 27, 2019 at 5:00 pm
Also, in the spirit of firsts, the RDR-7000 can detect turbulence up to 60 nautical miles. In addition to detecting typical storm cells, our weather radar detects hail, lightning, and wind shear. Q.
- For the first time, airlines to share data on turbulenceon September 4, 2019 at 9:39 am
Turbulence forecasting will also improve. "That will revolutionize not only our ability to detect turbulence events but to feed that data into models," Polderman said. IATA is targeting January for ...
- China conducts in-situ detection experiment on atmospheric turbulenceon August 21, 2019 at 2:45 am
BEIJING -- Chinese researchers have completed an in-situ detection experiment on near-space atmospheric turbulence in Northwest China's Qinghai province and Southwest China's Tibet autonomous region, ...
- Turbulence can strike in clear skies — and aircraft radar can’t detect iton July 12, 2019 at 1:39 pm
2:35 37 passengers injured by turbulence on Air Canada flight released from hospital WATCH ABOVE: 37 passengers injured by turbulence on Air Canada flight released from hospital NEW YORK — They ...
- The Best Defense Against Clear Air Turbulence Injuries Like Those Aboard Air Canada Flight Is Still Analogon July 12, 2019 at 3:14 am
While technology is advancing to make this invisible turbulence easier to detect, the best defense is still to wear your seatbelt at all times, no matter what the seatbelt light says. Passengers from ...
via Google News and Bing News