Researchers are first to demonstrate a circulator on a silicon chip at mm-wave frequencies that enables nonreciprocal transmission of waves: device could enable two-way radios and transform 5g networks, self-driving cars, and virtual reality.
Columbia Engineering researchers, led by Harish Krishnaswamy, associate professor of electrical engineering, in collaboration with Professor Andrea Alu’s group from UT-Austin, continue to break new ground in developing magnet-free non-reciprocal components in modern semiconductor processes. At the IEEE International Solid-State Circuits Conference in February, Krishnaswamy’s group unveiled a new device: the first magnet-free non-reciprocal circulator on a silicon chip that operates at millimeter-wave frequencies (frequencies near and above 30GHz). Following up on this work, in a paper published today in Nature Communications, the team demonstrated the physical principles behind the new device.
Most devices are reciprocal: signals travel in the same manner in forward and reverse directions. Nonreciprocal devices, such as circulators, on the other hand, allow forward and reverse signals to traverse different paths and therefore be separated. Traditionally, nonreciprocal devices have been built from special magnetic materials that make them bulky, expensive, and not suitable for consumer wireless electronics.
The team has developed a new way to enable nonreciprocal transmission of waves: using carefully synchronized high-speed transistor switches that route forward and reverse waves differently. In effect, it is similar to two trains approaching each other at super-high speeds that are detoured at the last moment so that they do not collide.
The key advance of this new approach is that it enables circulators to be built in conventional semiconductor chips and operate at millimeter-wave frequencies, enabling full-duplex or two-way wireless. Virtually all electronic devices currently operate in half-duplex mode at lower radio-frequencies (below 6GHz), and consequently, we are rapidly running out of bandwidth. Full-duplex communications, in which a transmitter and a receiver of a transceiver operate simultaneously on the same frequency channel, enables doubling of data capacity within existing bandwidth. Going to the higher mm-wave frequencies, 30GHz and above, opens up new bandwidth that is not currently in use.
“This gives us a lot more real estate,” notes Krishnaswamy, whose Columbia High-Speed and Mm-wave IC (CoSMIC) Lab has been working on silicon radio chips for full-duplex communications for several years. His method enables loss-free, compact, and extremely broadband non-reciprocal behavior, theoretically from DC to daylight, that can be used to build a wide range of non-reciprocal components such as isolators, gyrators, and circulators.
“This mm-wave circulator enables mm-wave wireless full-duplex communications,” Krishnaswamy adds, “and this could revolutionize emerging 5G cellular networks, wireless links for virtual reality, and automotive radar.”
The implications are enormous. Self-driving cars, for instance, require low-cost fully-integrated millimeter-wave radars. These radars inherently need to be full-duplex, and would work alongside ultra-sound and camera-based sensors in self-driving cars because they can work in all weather conditions and during both night and day. The Columbia Engineering circulator could also be used to build millimeter-wave full-duplex wireless links for VR headsets, which currently rely on a wired connection or tether to the computing device.
“For a smooth wireless VR experience, a huge amount of data has to be sent back and forth between the computer and the headset requiring low-latency bi-directional communication,” says Krishnaswamy. “A mm-wave full-duplex transceiver enabled by our CMOS circulator could be a promising solution as it has the potential to deliver high speed data with low latency, in a small size with low cost.”
Learn more: Researchers Invent Breakthrough Millimeter-wave Circulator IC
The Latest on: Wireless full-duplex communications
[google_news title=”” keyword=”Wireless full-duplex communications” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
- Visible Plus now includes smartwatch connectivity at the same low priceon March 28, 2024 at 2:04 pm
The service debuted in 2018 and includes two plans — Visible and Visible Plus. The former costs $25/month and includes unlimited data, talk, and text on Verizon's 5G and 4G LTE networks. You also get ...
- Best Internet Providers in Twin Falls, Idahoon March 27, 2024 at 3:30 pm
Sparklight and Quantum Fiber are your best options for home internet in Twin Falls, though T-Mobile Home Internet is worth a look as well.
- NAB Show: Clear-Com to Showcase Innovative Communications Solutionson March 25, 2024 at 10:55 am
It will display the Gen-IC Virtual Intercom, Arcadia Central Station, the latest enhancements to Eclipse HX 13.1 and other technologies ...
- AnkerWork Reveals Speakerphone With Instant Voiceprint Recognitionon March 21, 2024 at 4:00 am
AnkerWork is launching its latest speakerphone on Kickstarter. The S600 has an instant voiceprint feature that can store up to 300 voice patterns for higher quality calls.
- Best portable A4 printer: Top 10 portable powerhouse for on the go document perfectionon March 19, 2024 at 6:05 pm
Professionals on the go can be assured of high-quality printing from portable A4 printers since they are small, reliable, and efficient.
- Vubiq Networks Announces HaulPass Fiber, the Industry’s First Software-driven Millimeter Wave Radioon March 19, 2024 at 3:00 am
Vubiq Networks, Inc., the innovation leader in millimeter wave wireless broadband technology and solutions, today announced HaulPass Fiber, the industry’s first software-driven networking (SDN) ...
via Google News and Bing News