Most of today’s batteries are made up of rare lithium mined from the mountains of South America. If the world depletes this source, then battery production could stagnate.
Sodium is a very cheap and earth-abundant alternative to using lithium-ion batteries that is also known to turn purple and combust if exposed to water – even just water in the air.
Worldwide efforts to make sodium-ion batteries just as functional as lithium-ion batteries have long since controlled sodium’s tendency to explode, but not yet resolved how to prevent sodium-ions from “getting lost” during the first few times a battery charges and discharges. Now, Purdue University researchers made a sodium powder version that fixes this problem and holds a charge properly.
“Adding fabricated sodium powder during electrode processing requires only slight modifications to the battery production process,” said Vilas Pol, Purdue associate professor of chemical engineering. “This is one potential way to progress sodium-ion battery technology to the industry.”
The work, published in a recent issue of the Journal of Power Sources, aligns with Purdue’s giant leaps celebration, acknowledging the university’s global advancements made in health, space, artificial intelligence and sustainability as part of Purdue’s 150th anniversary. Those are the four themes of the yearlong celebration’s Ideas Festival, designed to showcase Purdue as an intellectual center solving real-world issues.
Even though sodium-ion batteries would be physically heavier than lithium-ion technology, researchers have been investigating sodium-ion batteries because they could store energy for large solar and wind power facilities at lower cost.
The problem is that sodium ions stick to the hard carbon end of a battery, called an anode, during the initial charging cycles and not travel over to the cathode end. The ions build up into a structure called a “solid electrolyte interface.”
“Normally the solid electrolyte interface is good because it protects carbon particles from a battery’s acidic electrolyte, where electricity is conducted,” Pol said. “But too much of the interface consumes the sodium ions that we need for charging the battery.”
Purdue researchers proposed using sodium as a powder, which provides the required amount of sodium for the solid electrolyte interface to protect carbon, but doesn’t build up in a way that it consumes sodium ions.
They minimized sodium’s exposure to the moisture that would make it combust by making the sodium powder in a glovebox filled with the gas argon. To make the powder, they used an ultrasound – the same tool used for monitoring the development a fetus – to melt sodium chunks into a milky purple liquid. The liquid then cooled into a powder, and was suspended in a hexane solution to evenly disperse the powder particles.
Just a few drops of the sodium suspension onto the anode or cathode electrodes during their fabrication allows a sodium-ion battery cell to charge and discharge with more stability and at higher capacity – the minimum requirements for a functional battery.
A provisional U.S. patent has been filed for this technology.
Learn more: Super cheap earth element to advance new battery tech to the industry
The Latest on: Sodium-ion batteries
[google_news title=”” keyword=”sodium-ion batteries” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Sodium-ion batteries
- Beyond Lithium: What Will the Next Generation of Batteries Be Made Of?on April 18, 2024 at 1:59 pm
The clean energy revolution requires a lot of batteries. While lithium-ion dominates today, researchers are on a quest for better materials.
- Former Tesla executive considering Commerce City for new sodium-ion battery foundaryon April 18, 2024 at 1:37 pm
Adams County may soon land its third large-scale battery manufacturing plant, one producing more affordable and environmentally safer batteries. The Colorado Economic Development Commission approved ...
- Battery demand rose 20% in Q1 2024 year-on-yearon April 18, 2024 at 5:20 am
Battery demand rose 20% year-on-year in the first quarter of 2024 to 230GWh across all end-use markets, reported Rho Motion.
- Factors Affecting the Price of Sodium-ion Batterieson April 16, 2024 at 10:22 pm
As the worldwide energy framework undergoes transformative changes and the novel energy vehicle market continues to rapidly expand, sodium-ion batteries—an emerging energy storage technology—are ...
- Why some researchers think calcium is the future of batterieson April 16, 2024 at 9:55 am
Rechargeable versions of these low-cost power sources can be made today, but commercialization remains far down the road ...
- CATL’s Boss Doesn’t Think Solid-State Batteries Will Be Viable Any Time Soonon April 15, 2024 at 4:49 am
Robin Zeng, the man behind CATL, says that he supports solid-state batteries but believes they present problems that need to be overcome. For example, he says that to get the most out of them, they ...
- Sodium-Ion Battery Market worth $1.2 billion by 2028 - Exclusive Report by MarketsandMarketson April 14, 2024 at 11:21 pm
Ion Battery Market by Battery Type (Sodium-Sulfur, and Sodium-Salt), Technology Type (Aqueous and Non-Aqueous), End-Use (Energy Storage ...
- Sodium-Ion Battery Market worth $1.2 billion by 2028 - Exclusive Report by MarketsandMarkets™on April 14, 2024 at 11:00 pm
Technology Type (Aqueous and Non-Aqueous), End-Use (Energy Storage, Automotive, and Industrial), and Region (Asia Pacific, Europe, and North America) - Global Forecast to 2028", is projected to grow ...
- All-solid-state sodium batteries near practical useon April 12, 2024 at 10:17 am
Science X is a network of high quality websites with most complete and comprehensive daily coverage of the full sweep of science, technology, and medicine news ...
via Bing News