When Geoffrey Coates, a professor of chemistry and chemical biology at Cornell University, gives a talk about plastics and recycling, he usually opens with this question: What percentage of the 78 million tons of plastic used for packaging – for example, a 2-liter bottle or a take-out food container – actually gets recycled and re-used in a similar way?
The answer, just 2 percent. Sadly, nearly a third is leaked into the environment, around 14 percent is used in incineration and/or energy recovery, and a whopping 40 percent winds up in landfills.
One of the problems: Polyethylene (PE) and polypropylene (PP), which account for two-thirds of the world’s plastics, have different chemical structures and thus cannot be repurposed together. Or, at least, an efficient technology to meld these two materials into one hasn’t been available in the 60 years they’ve both been on the market.
That could change with a discovery out of Coates’ lab. He and his group have collaborated with a group from the University of Minnesota to develop a multiblock polymer that, when added in small measure to a mix of the two otherwise incompatible materials, create a new and mechanically tough polymer.
The two groups’ work is detailed in a paper, “Combining polyethylene and polypropylene: Enhanced performance with PE/iPP multiblock polymers,” published online Feb. 23 in Science.
James Eagan, a postdoctoral researcher in Coates’ group, is lead author of the paper. Other collaborators included researcher Anne LaPointe and former visiting scientist Rocco DiGirolamo.
Scientists for years have tried to develop a polymer that does what Coates, LaPointe and Eagan have achieved. By adding a miniscule amount of their tetrablock (four-block) polymer – with alternating polyethylene and polypropylene segments – the resultant material has strength superior to diblock (two-block) polymers they tested.
In their test, two strips of plastic were welded together using different multi-block polymers as adhesives, then mechanically pulled apart. While the welds made with diblock polymers failed relatively quickly, the weld made of the group’s tetrablock additive held so well that the plastic strips broke instead.
“People have done things like this before,” Coates said, “but they’ll typically put 10 percent of a soft material, so you don’t get the nice plastic properties, you get something that’s not quite as good as the original material.”
“What’s exciting about this,” he said, “is we can go to as low as 1 percent of our additive, and you get a plastic alloy that really has super-great properties.”
Not only does this tetrablock polymer show promise for improving recycling, Eagan said, it could spawn a whole new class of mechanically tough polymer blends.
“If you could make a milk jug with 30 percent less material because it’s mechanically better, think of the sustainability of that,” he said. “You’re using less plastic, less oil, you have less stuff to recycle, you have a lighter product that uses less fossil fuel to move it.”
Learn more: New polymer additive could revolutionize plastics recycling
[osd_subscribe categories=’plastics-recycling’ placeholder=’Email Address’ button_text=’Subscribe Now for any new posts on the topic “PLASTICS RECYCLING”‘]
Receive an email update when we add a new PLASTICS RECYCLING article.
The Latest on: Plastics recycling
[google_news title=”” keyword=”plastics recycling” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Plastics recycling
- Company scraps plans for $1.1B plastics recycling plant in central Pa.on April 18, 2024 at 7:50 pm
NORTHUMBERLAND — Plans for a $1.1 billion facility in Northumberland County to convert used plastic materials into feedstock for new products have been scrapped. Encina Development Group in a news ...
- Cleanfarms talks agribusiness plastics recycling in Canadaon April 18, 2024 at 7:21 pm
Not-for-profit organization Cleanfarms will hold a panel discussion on agricultural plastics at an event in Ottawa in late April.
- Covering Your Health: Earth Day & Recyclingon April 18, 2024 at 1:57 pm
Earth Day is fast approaching. It is the day we take a step back to think about the impact we have on our environment. Despite some gains in ...
- Removing and reusing plastic from electronic wasteon April 18, 2024 at 10:20 am
HOUSTON, Texas (KTRK) -- CompuCycle is taking an extra step when it comes to recycling electronic waste. In the past year, they opened a plastics plant at their facility. The process involves ...
- Are You Recycling Your Plastics the Wrong Way? Here's How to Checkon April 18, 2024 at 8:15 am
Use reusable straws instead of plastic straws. Avoid using plastic utensils unless they can be washed and reused. Recycle plastic bags, see if your local grocery store or recycling center will take ...
- UN Plastics Treaty Should Mandate Protection of Human Rights and Healthon April 18, 2024 at 7:40 am
Next week in Ottawa, countries will reconvene to continue negotiations on an international legally binding instrument on plastic pollution.
- AI could help the US be less terrible at recyclingon April 18, 2024 at 6:28 am
EverestLabs is among a group of AI startups disrupting the waste sector by using 3D cameras, machine learning, and robots.
- Plastics Recycling Show Now in Indiaon April 15, 2024 at 1:15 am
After successful editions in the Middle East and Europe, the Plastics Recycling Show is all set to debut in India. The show which is scheduled to be held in Mumbai aims at promoting responsible ...
- Critics call out plastics industry over "fraud of plastic recycling"on April 14, 2024 at 6:53 am
Only 5 to 6% of plastic waste produced in the U.S. is actually recycled. A new report accuses the plastics industry of a decades-long campaign to "mislead" the public about the viability of recycling.
via Bing News