Microbattery fabricated on the backside of a Si chip by stencil printing Lithium cobalt oxide (LCO) in a cavity in Si followed by assembly and bonding with a glass substrate with a printed graphite layer.
Fitbits, car windows, oil refineries — the roll call of devices and technologies that rely on ultra-small sensors already numbers in the hundreds of billions.
Sensors measure changing conditions and report the data electronically – say, to heat up a bedroom or cool down a nuclear reactor. Sensors with microcircuits are ubiquitous in today’s networks. Some estimates project ten trillion sensors will be in use by 2030.
Ultra-small sensors are powered by their counterparts: ultra-small batteries. As the pace of miniaturization and its applications accelerates, so does the need for ever-smaller sensor batteries that can last a lifetime.
Kristofer Pister, professor of electrical engineering and computer science, leads research to embed microbatteries directly into sensor circuitry, providing a built-in power source instead of an external one. The technology could shrink circuit boards to make the sensor, microprocessor and battery all one unit that can speak to the internet.
The Bakar Fellows Program supports his on-going work to fabricate and print microbatteries within the sensor circuitry itself. Much of the work is also being done by his post-doc, Dr. Anju Toor, who has developed a battery design and fabrication process to print high-capacity batteries. Pister describes the technology and its potential.
Q Besides size, are there other features that make this battery-inside a sensor concept attractive to industry?
A The number one requirement for batteries is connectivity. You have to get the data back to where it needs to go. And you need to do it reliably. The microbatteries we are developing pack a lot of power into a smaller package. They’re also lighter than current batteries and cheaper to produce. Manufacturing them uses the same fabrication and circuit printing technology already used to make trillions of chips.
Q. How are they made?
A The circuitry is stencil printed into cavities on the silicon wafer. You can picture it as etching micro-trenches into the wafer. It’s the same principle as making screen-printed t-shirts. You have a pattern with holes in some areas and not in others. We deposit electrode slurries in the patterned cavities.
Q How small are the batteries?
A The batteries will be about the thickness of three sheets of paper.
Q It seems that you’re creating something inside the box by thinking outside the box. Why do you think your idea of fabricating batteries directly in the sensor circuits had not been devised before?
A. Many people have made ultra-small batteries because they have seen this need coming. I really don’t know why the idea of embedding the batteries has not been thought of before. It has seemed obvious to me for about ten years.
I founded a company called Dust Networks in 2002. We produced ultra-low power wireless networking chips – we call them smart dust – that could function for a decade on the power of a AA battery. They are now deployed worldwide, from oil refineries to parking meters.
As with all microsensors on the market, I had the battery as separate component, and it was all assembled. But it became clear that to miniaturize the sensors further, the right thing to do is to print the batteries on the wafer.
Q. What part does your Spark award play in this development?
A The Bakar Fellows Program support is about bringing the technology to the point that it can be commercialized. In our collaborations with industry up to now, we have been using micro-batteries off the shelf to power sensors. Built-in power sources would be very useful to support applications from the largest oil refineries to medical devices in clinics and in the home, and for personal health monitoring.
They would work very well for wearables, where comfort and appearance are important. As just one example, they are a natural for applications like smart bandages to monitor wound healing by assessing the healing process of the wound environment. We think this batteries-in-a chip design will be part of devices in the full range of commercial spaces.
Original Article: Microbatteries that Make Sense
More from: University of California Berkeley
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Microbatteries
- Feed has no items.
Go deeper with Google Headlines on:
Microbatteries
[google_news title=”” keyword=”Microbatteries” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Embedding batteries in sensors
- New implant and app enable patients to monitor bladder functionon March 25, 2024 at 12:01 pm
Should you run to the bathroom now? Or can you hold it until you get home? A new implant and associated smartphone app may someday remove the guesswork from the equation.
- This implant will tell a smartphone app when you need to peeon March 25, 2024 at 12:01 pm
The stretchy, wireless sensor could keep patients with bladder issues informed in real-time.
- Go with the flow: Battery-free bladder sensor offers filling detectionon March 25, 2024 at 12:01 pm
Researchers have developed a new soft, flexible, battery-free implant that sticks to the bladder wall to detect fullness.
- MIT’s Self-Powered Sensor Automatically Harvests Ambient Magnetic Energyon March 25, 2024 at 3:03 am
A system designed at MIT could allow sensors to operate in remote settings, without batteries. MIT researchers have developed a battery-free, self-powered sensor that can harvest energy from its ...
- The Army Is Clearing Out for Coyote Drone Hunterson March 22, 2024 at 5:01 am
Big businesses continuously lay off and hire workers in response to market trends and financial consideration. The U.S. military, though endowed with the largest defense budget on the planet, has its ...
Go deeper with Google Headlines on:
Embedding batteries in sensors
[google_news title=”” keyword=”embedding batteries in sensors” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]