Eva Harth, director of the Welch-UH Center for Excellence in Polymer Chemistry, said the new method addresses a long-standing need for industrial plastics producers, without requiring a new catalyst or expensive additives.
Plastics are a victim of their own success, so inexpensive, easy to use and versatile that the world is awash in plastic waste. Now researchers from the University of Houston have reported a new method of producing polyolefins – made from hydrocarbons and the most common building block of plastics – structured to address one of the biggest stumbling blocks to plastics recycling.
The process also would allow plastics to be produced from food oils and other natural substances.
Eva Harth, director of the Welch-UH Center for Excellence in Polymer Chemistry, said the process addresses a long-standing need for industrial plastics producers, without requiring a new catalyst or expensive additives. “It’s a very simple process,” she said.
Harth is a corresponding author for a paper describing the discovery, published in the German journal Angewandte Chemie. Co-authors include co-corresponding author Glen R. Jones, a post-doctoral researcher with the Welch-UH Center, and first author Hatice E. Basburg Alhan, a graduate student at UH.
Polyolefins, and derivative products such as polyethylene and polypropylene, are used for everything from grocery bags to industrial pipes. The qualities of the plastics – rigidity vs. flexibility, for example – are determined in part by a chemical process known as branching: Jones said highly branched polyolefins are used in products that require softness or flexibility, such as grocery bags, while low branching is used to produce rigid plastics.
Traditionally, different catalysts have been required to spark differing levels of branching, Harth said, meaning that only one type of plastic could be produced at a time. “You have to be specific about what material you are after, what type of branching you need,” she said.
The new method allows branching to be modulated using a palladium catalyst with varying amounts of added aluminum chloride, which functioned as a Lewis acid; the aluminum chloride – an abundant and inexpensive substance – can be added at different points in the process, allowing the resulting polyolefin to contain differing branching properties.
The new process could address two growing issues faced by plastics producers – how to dispose of plastic waste in an environmentally friendly way, and how to reduce the use of oil and natural gas by instead using food oils and other natural substances.
Current polymers used in everyday materials – grocery bags, milk jugs, toys and medical equipment, for example – won’t readily mix when they are melted down for chemical recycling. “These new polymers could sit at the boundary,” Jones said, allowing plastics with disparate properties to be more easily recycled.
The process will work with a variety of molecules to produce a polymer, Harth said, suggesting that the concept provides a new platform to produce plastics.
And that platform, she said, could lend itself to producing a variety of functional plastics from natural oils and other molecular sources. “This has exciting sustainability possibilities for the industry.”
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
- Indian government wants manufacturers to manage plastic waste – but its proposed rules are rubbishon October 7, 2020 at 1:11 am
Industry experts say the draft rules do not hold producers responsible, instead offering them ways to evade responsibility.
- Plastic pollution is a huge problem—and it’s not too late to fix iton October 6, 2020 at 10:42 pm
Correcting our plastic waste problem requires a fundamental change in thinking about how plastics are made, used, and discarded, two new studies say.
- Dangers Posed by Plastic Are Hidden Far Beneath the Ocean’s Surfaceon October 6, 2020 at 10:21 pm
There is more plastic embedded in the sea floor, 9.25 million to 15.87 million tons, than floating on the ocean’s surface, researchers in Australia have found, in what a scientist called the world’s ...
- Dow India launches Rethink+, India's first digital waste management program to recycle plastic wasteon October 6, 2020 at 4:30 am
PRNewswire/ -- Dow Chemical International Pvt. Ltd (Dow India) announced today the launch of its first digital waste management platform Rethink+. This is ...
- DIY: Turn Plastic Waste to Craft and Attractive Pieceson October 4, 2020 at 9:01 pm
Reusing and recycling the plastic waste into something useful and fashionable will helpbreduce the plastic piling up in the world. Take a look at some of these DIY projects.
Go deeper with Google Headlines on:
Go deeper with Bing News on:
- EU auditors warn over plastics recycling infrastructureon October 7, 2020 at 3:34 am
The need for the UK and other European countries to increase infrastructure for the recycling of plastics is signalled in a review from the European Court of Auditors, published yesterday (October 6) ...
- EU set to miss targets for recycling plastic packaging: auditorson October 6, 2020 at 2:32 pm
There is a significant risk that the EU will not meet its plastic packaging recycling targets for 2025 and 2030, according to a review published Tuesday by the European Court of Auditors. The update ...
- EU at risk of missing plastic recycling targetson October 6, 2020 at 7:10 am
The European Union is facing a growing waste problem and is at risk of missing its plastic recycling targets for 2025 and 2030 as more stringent export rules will be implemented next year, the bloc's ...
- EU falling behind on plastic recycling targets, auditors sayon October 6, 2020 at 2:50 am
The European Union is at risk of missing its plastic packaging recycling targets, the European Court of Auditors (ECA) said on Tuesday, warning an incoming ban on exports of trash to poorer nations ...
- Plastic Recycling Market to Witness Astonishing Growth with Key Players, Analysis with Impact of COVID-19, Analysis, Demand, Forecast 2026on September 20, 2020 at 5:12 pm
Sep 21, 2020 (The Expresswire) -- Global "Plastic Recycling Market" (2020-2026) status and position of worldwide and key regions, with perspectives of manufacturers, regions, product types and end ...