Most of today’s batteries are made up of rare lithium mined from the mountains of South America. If the world depletes this source, then battery production could stagnate.
Sodium is a very cheap and earth-abundant alternative to using lithium-ion batteries that is also known to turn purple and combust if exposed to water – even just water in the air.
Worldwide efforts to make sodium-ion batteries just as functional as lithium-ion batteries have long since controlled sodium’s tendency to explode, but not yet resolved how to prevent sodium-ions from “getting lost” during the first few times a battery charges and discharges. Now, Purdue University researchers made a sodium powder version that fixes this problem and holds a charge properly.
“Adding fabricated sodium powder during electrode processing requires only slight modifications to the battery production process,” said Vilas Pol, Purdue associate professor of chemical engineering. “This is one potential way to progress sodium-ion battery technology to the industry.”
The work, published in a recent issue of the Journal of Power Sources, aligns with Purdue’s giant leaps celebration, acknowledging the university’s global advancements made in health, space, artificial intelligence and sustainability as part of Purdue’s 150th anniversary. Those are the four themes of the yearlong celebration’s Ideas Festival, designed to showcase Purdue as an intellectual center solving real-world issues.
Even though sodium-ion batteries would be physically heavier than lithium-ion technology, researchers have been investigating sodium-ion batteries because they could store energy for large solar and wind power facilities at lower cost.
The problem is that sodium ions stick to the hard carbon end of a battery, called an anode, during the initial charging cycles and not travel over to the cathode end. The ions build up into a structure called a “solid electrolyte interface.”
“Normally the solid electrolyte interface is good because it protects carbon particles from a battery’s acidic electrolyte, where electricity is conducted,” Pol said. “But too much of the interface consumes the sodium ions that we need for charging the battery.”
Purdue researchers proposed using sodium as a powder, which provides the required amount of sodium for the solid electrolyte interface to protect carbon, but doesn’t build up in a way that it consumes sodium ions.
They minimized sodium’s exposure to the moisture that would make it combust by making the sodium powder in a glovebox filled with the gas argon. To make the powder, they used an ultrasound – the same tool used for monitoring the development a fetus – to melt sodium chunks into a milky purple liquid. The liquid then cooled into a powder, and was suspended in a hexane solution to evenly disperse the powder particles.
Just a few drops of the sodium suspension onto the anode or cathode electrodes during their fabrication allows a sodium-ion battery cell to charge and discharge with more stability and at higher capacity – the minimum requirements for a functional battery.
A provisional U.S. patent has been filed for this technology.
Receive an email update when we add a new SODIUM-ION BATTERIES article.
The Latest on: Sodium-ion batteries
via Google News
The Latest on: Sodium-ion batteries
- Future electronics might be rechargeable through their movement on September 28, 2018 at 12:56 am
Besides, according to a study by the University of Birmingham researchers, sodium-ion battery technology can hold as much as seven times the charge of the current lithium-ion solution. However, in an ... […]
- A sprinkle of sodium powder keeps salt-based batteries powering on on September 27, 2018 at 5:26 pm
Purdue researcher Jialiang Tang was part of a team that came up with a new sodium powder that led to improved performance of sodium-ion batteries(Credit: Purdue University) For some time now ... […]
- The race to develop the next generation battery on September 24, 2018 at 4:21 pm
Batteries can help stabilise grids by storing energy efficiently. “Sodium-ion batteries could be an inexpensive alternative to lithium-ion in the grid storage market,” says Ms Cheng. Sodium-ion batter... […]
- Professor Hanington's Speaking of Science: Sodium batteries may replace lithium on September 24, 2018 at 2:00 pm
But still, the battery has to be heated to work. Many facilities around the world are working on a method to make sodium-ion batteries just as functional as lithium-ion batteries at the same time ... […]
- Researchers develop stable sodium powder version of lithium batteries on September 20, 2018 at 6:22 am
Worldwide efforts to make sodium-ion batteries just as functional as lithium-ion batteries have long since controlled sodium's tendency to explode, but not yet resolved how to prevent sodium-ions from ... […]
- Super cheap earth element to advance new battery tech to the industry on September 19, 2018 at 1:45 pm
"This is one potential way to progress sodium-ion battery technology to the industry." The study was made available online in June 2018 ahead of print on August 31, 2018 in the Journal of Power ... […]
- Sodium-ion batteries to amplify capacity by 700 percent on September 13, 2018 at 5:00 pm
According to a new study by University of Birmingham researchers, sodium-ion battery technology can hold as much as seven times the charge of the current lithium-ion solution. However, in an article p... […]
- Investments In Solid State Batteries Doubles, Sodium Ion Research Promising on September 13, 2018 at 3:20 pm
Someday, 18650 lithium ion battery cells — the building blocks for electric vehicles and energy storage today — will be on display at the Smithsonian and people will marvel at how such crude devices w... […]
- New high-capacity sodium-ion could replace lithium in rechargeable batteries on September 12, 2018 at 6:46 am
University of Birmingham scientists are paving the way to swap the lithium in lithium-ion batteries with sodium, according to research published in the Journal of the American Chemical Society. […]
via Bing News