An international team of researchers have developed a low-cost sensor made from semiconducting plastic that can be used to diagnose or monitor a wide range of health conditions, such as surgical complications or neurodegenerative diseases.
This work opens up new directions in biosensing, where materials can be designed to interact with a specific metabolite, resulting in far more sensitive and selective sensors.
The sensor can measure the amount of critical metabolites, such as lactate or glucose, that are present in sweat, tears, saliva or blood, and, when incorporated into a diagnostic device, could allow health conditions to be monitored quickly, cheaply and accurately. The new device has a far simpler design than existing sensors, and opens up a wide range of new possibilities for health monitoring down to the cellular level. The results are reported in the journal Science Advances.
The device was developed by a team led by the University of Cambridge and King Abdullah University of Science and Technology (KAUST) in Saudi Arabia. Semiconducting plastics such as those used in the current work are being developed for use in solar cells and flexible electronics, but have not yet seen widespread use in biological applications.
“In our work, we’ve overcome many of the limitations of conventional electrochemical biosensors that incorporate enzymes as the sensing material,” said lead author Dr Anna-Maria Pappa, a postdoctoral researcher in Cambridge’s Department of Chemical Engineering and Biotechnology. “In conventional biosensors, the communication between the sensor’s electrode and the sensing material is not very efficient, so it’s been necessary to add molecular wires to facilitate and ‘boost’ the signal.”
To build their sensor, Pappa and her colleagues used a newly-synthesised polymer developed at Imperial College that acts as a molecular wire, directly accepting the electrons produced during electrochemical reactions. When the material comes into contact with a liquid such as sweat, tears or blood, it absorbs ions and swells, becoming merged with the liquid. This leads to significantly higher sensitivity compared to traditional sensors made of metal electrodes.
Additionally, when the sensors are incorporated into more complex circuits, such as transistors, the signal can be amplified and respond to tiny fluctuations in metabolite concentration, despite the tiny size of the devices.
Initial tests of the sensors were used to measure levels of lactate, which is useful in fitness applications or to monitor patients following surgery. However, according to the researchers, the sensor can be easily modified to detect other metabolites, such as glucose or cholesterol by incorporating the appropriate enzyme, and the concentration range that the sensor can detect can be adjusted by changing the device’s geometry.
“This is the first time that it’s been possible to use an electron accepting polymer that can be tailored to improve communication with the enzymes, which allows for the direct detection of a metabolite: this hasn’t been straightforward until now,” said Pappa. “It opens up new directions in biosensing, where materials can be designed to interact with a specific metabolite, resulting in far more sensitive and selective sensors.”
Since the sensor does not consist of metals such as gold or platinum, it can be manufactured at a lower cost and can be easily incorporated in flexible and stretchable substrates, enabling their implementation in wearable or implantable sensing applications.
“An implantable device could allow us to monitor the metabolic activity of the brain in real time under stress conditions, such as during or immediately before a seizure and could be used to predict seizures or to assess treatment,” said Pappa.
The researchers now plan to develop the sensor to monitor metabolic activity of human cells in real time outside the body. The Bioelectronic Systems and Technologies group where Pappa is based is focused on developing models that can closely mimic our organs, along with technologies that can accurately assess them in real-time. The developed sensor technology can be used with these models to test the potency or toxicity of drugs.
Receive an email update when we add a new BIOSENSING article.
The Latest on: Biosensing
via Google News
The Latest on: Biosensing
- Surface Plasmon Resonance (SPR) Market - Future Health Threats 2025 | Biosensing Instruments, Bio-Rad Laboratories on December 4, 2018 at 3:07 am
Surface Plasmon Resonance (SPR) is a phenomenon of squeezing light to a tiny volume, causing biomolecules to get trapped across a surface, which in turn enables their study under a microscope. In the ... […]
- Flowtime biosensing meditation headband hits Kickstarter on December 4, 2018 at 12:50 am
Entertech has created a new meditation headband that is capable of tracking your brainwaves and heart rate in real time to allow you more insight into your mind and body when meditating. Data can be e... […]
- MIT and Harvard's biosensing tattoos will change color when you're dehydrated on November 10, 2018 at 4:00 pm
Tattoos can make for interesting skin decoration, but could they also be made to act like wearable devices that offer up health-related or other biometric insights through the use of biosensing ink? A ... […]
- Next-generation biosensing on October 3, 2018 at 8:17 am
Q: Could you explain what biosensors are? A: Biosensors are a good way to diagnose diseases or detect viruses, and toxic substances for humans and the environment. Biosensors are usually small, and co... […]
- IMPETUS - Pilot line for paper based electrochemical test strips dedicated to quantitative biosensing in liquids. on June 5, 2018 at 1:33 am
IMPETUS will combine paper, printing and microchip technologies to realize a pilot line in an industrial environment capable of manufacturing fully integrated paper-based electrochemical biosensors th... […]
- Final Report Summary - PHOTON-PLASMONHYB (Photonic-plasmonic hybrid for optical switching and biosensing application) on May 24, 2018 at 5:00 pm
The proposed project is built on our recent works that include a demonstration of selective excitation of optical waveguide modes based on phase matching condition between a plasmonic nanoantenna grat... […]
- In vivo Real-Time Biosensing using Aptamers on mm-Sized Implants on January 18, 2018 at 10:01 pm
Develop injectable in-vivo implant for real-time and continuous biosensing of biomarkers to establish patient-specific baselines and to understand disease dynamics. As proof of concept, we focus on tr... […]
- Bridging the Gap for AI in HealthcareOMsignal Adds Healthcare and Wellness to Biosensing Smartwear Platform on January 10, 2018 at 8:40 am
MONTREAL, Jan. 10, 2018 (GLOBE NEWSWIRE) -- OMsignal (OM), the biosensing smartwear platform is announcing the addition of healthcare and wellness capabilities with the launch of a new range of lifest... […]
via Bing News