What’s better than platinum?
In hydrogen fuel cells, the answer is cofacial cobalt porphyrins.
It’s a mouthful to say, and if you’re not a chemist, you’ve probably never heard of these compounds before. But these molecules — which are great at facilitating a chemical reaction that’s needed to produce power from hydrogen and oxygen — could be the next big advance in alternative energy.
The compounds assemble themselves in the lab from Lego-like chemical building blocks that are designed to fit together. It’s shake-and-bake technology: Scientists add the pieces to a flask, stir them together and add heat. Over time, the building blocks join together in the right places to form the final complexes.
The material is cheap and easy to produce in large quantities. This makes it an ideal candidate for replacing costly platinum catalysts used in hydrogen fuel cells today, says Timothy Cook, PhD, assistant professor of chemistry in the University at Buffalo College of Arts and Sciences, whose team designed the new self-assembled compounds.
Such technology could one day enable automakers to slash the price of hydrogen cars, putting the eco-friendly vehicles within reach for more consumers. Low-cost fuel cells could also drive the development of other hydrogen-powered devices, such as backup generators. Hydrogen is considered a clean energy source because fuel cells emit only water as a byproduct.
“To bring down the price of hydrogen vehicles and make them a realistic option for more people, we need a catalyst that’s cheaper than platinum,” Cook says. “The catalyst we made can be self-assembled in huge quantities. It has ruthenium and cobalt in it — much cheaper metals — and, yet, it works as well or better than a commercially available platinum catalyst that we tested alongside it.”
A study describing the new material was published on May 29 in Chemistry: A European Journal. Cook’s co-authors included first author Amanda N. Oldacre, a recent UB chemistry PhD graduate; UB chemistry PhD student Matthew R. Crawley; and Alan E. Friedman, PhD, research associate professor of materials design and innovation in the UB School of Engineering and Applied Sciences.
A self-manufacturing catalyst
Cook’s lab specializes in molecular self-assembly, a powerful process for creating new materials.
“When I think about molecular self-assembly, I always think about Legos,” he says. “You have building blocks that are designed to fit together, like pieces of a puzzle. These building blocks are attracted to each other, and when you put them together and add energy, they come together on their own.
“Self-assembly is a great way to make a complex molecule. Usually, to synthesize a new material, you have to add pieces one by one, which takes time and money. Molecular self-assembly is faster — it’s a one-step process.”
Cofacial cobalt porphyrins consist of two flat molecules called cobalt porphyrins, which are stacked on top of each other like sandwich bread and linked by ruthenium “clips.”
To create the final compounds, Cook’s lab designed porphyrins and clips with chemical properties that ensured they would connect to each other at the right spots. The team then mixed a solution of the porphyrins with the clips and added heat. In two days, the pieces had self-assembled to form the cofacial cobalt porphyrins.
A catalyst inspired by nature
Scientists have long known that porphyrins are great at grabbing and splitting oxygen: In the human body, iron-based versions of these molecules are responsible for helping to convert the oxygen we breathe into water, releasing energy in the process, Cook says.
But designing artificial porphyrin structures that act as catalysts has been difficult, he adds. The process of creating these compounds is usually expensive, involving many steps and generating very little material at the end.
Self-assembly solves these problems: Cook’s team created 79 grams of cofacial cobalt porphyrins for every 100 grams of starter material — much better than the less than 1 percent yield that other labs have reported when synthesizing similar materials. In addition, his team was able to easily swap out and test ruthenium clips of different lengths to fine tune the compound’s electrochemical qualities with an eye toward designing an ideal catalyst.
“It is truly rewarding to work on the fundamental chemistry of this project, which could have a large impact on carbon-neutral energy conversion,” says Oldacre, the first author. “Using self-assembly techniques, we are able to make cheaper materials in 48 hours, without the difficult, time-consuming purification steps that other methods for synthesizing new compounds require.”
The Latest on: Hydrogen fuel cells
via Google News
The Latest on: Hydrogen fuel cells
- World’s first hydrogen powered train rolled out by Germany on September 18, 2018 at 1:18 pm
Hydrogen trains are equipped with fuel cells that produce electricity through a combination of hydrogen and oxygen, a process that leaves steam and water as the only emissions. Excess energy is ... […]
- World’s first hydrogen fuel cell trains enter service in Germany on September 18, 2018 at 12:13 pm
The world’s first hydrogen fuel cell-powered trains have entered service in Germany, Alstom, the company behind it, has announced. Called the Coradia iLint, the new trains feature fuel cells that util... […]
- European nations plan to use more hydrogen for energy needs on September 18, 2018 at 11:37 am
Yet uptake on the concept has been slow so far, compared with some other technologies. Costa Rica has begun test driving its first hydrogen fuel cell bus as the country moves towards using 100 per cen... […]
- EU countries agree to explore hydrogen as energy source on September 18, 2018 at 7:31 am
Germany on Monday began running the world’s first passenger trains powered by hydrogen fuel cells, replacing two diesel-fired trains on a line of nearly 100 km (62 miles) between Cuxhaven and Buxtehud... […]
- The world's first hydrogen train is now in service on September 18, 2018 at 5:29 am
A hydrogen tank feeds a fuel cell that generates energy, which is then pushed to an electric drivetrain. A very small battery helps maintain power continuity, as well as storing energy saved from rege... […]
- World’s first hydrogen-powered train opens in Germany on September 18, 2018 at 2:34 am
Germany has launched a, first of its kind, hydrogen train named the Coradia iLint. The train, made by Alstrom and equipped with fuel cells which convert hydrogen and electricity into electricity, has ... […]
- World's first hydrogen fuel cell-powered train enters service on September 17, 2018 at 5:57 pm
The world's first hydrogen fuel cell-powered train entered regular service on Monday in Germany as a two-car Alstom Coradia iLint took to the tracks on Eisenbahnen und Verkehrsbetriebe Elbe-Weser ... […]
- World's first hydrogen fuel cell powered train to run in Germany on September 17, 2018 at 4:31 pm
French railway manufacturer Alstom has placed the first hydrogen fuel cell powered train into commercial service in Lower Saxony Germany. The cells are already in use in cars, trucks, and even airplan... […]
- Lithium-Ion Battery and Hydrogen Fuel Cell Forklifts on September 17, 2018 at 8:17 am
The forklift is the Rodney Dangerfield of drivable machines. It gets no respect. The humble forklift is grotesque when compared to the elegance of any consumer vehicle. And it's nowhere near as cool a... […]
via Bing News