A discovery by an international team of researchers from Princeton University, the Georgia Institute of Technology and Humboldt University in Berlin points the way to more widespread use of an advanced technology generally known as organic electronics.
The research, published Nov. 13 in the journal Nature Materials, focuses on organic semiconductors, a class of materials prized for their applications in emerging technologies such as flexible electronics, solar energy conversion, and high-quality color displays for smartphones and televisions. In the short term, the advance should particularly help with organic light-emitting diodes that operate at high energy to emit colors such as green and blue.
“Organic semiconductors are ideal materials for the fabrication of mechanically flexible devices with energy-saving low temperature processes,” said Xin Lin, a doctoral student and a member of the Princeton research team. “One of their major disadvantages has been their relatively poor electrical conductivity, which leads to inefficient devices with a shorter operating lifetime than is required for commercial applications. We are working to improve the electrical properties of organic semiconductors to make them available for more applications.”
Semiconductors, typically made of silicon, are the foundation of modern electronics because engineers can take advantage of their unique properties to control electrical currents. Among many applications, semiconductor devices are used for computing, signal amplification and switching. They are used in energy-saving devices such as light-emitting diodes and devices that convert energy such as solar cells.
Essential to these functionalities is a process called doping, in which the semiconductor’s chemical makeup is modified by adding a small amount of chemicals or impurities. By carefully choosing the type and amount of dopant, researchers can alter semiconductors’ electronic structure and electrical behavior in a variety of ways.
In their recent Nature Materials article, the researchers describe a new approach for greatly increasing the conductivity of organic semiconductors, which are formed of carbon-based molecules rather than silicon atoms. The dopant, a ruthenium-containing compound, is a reducing agent, which means it adds electrons to the organic semiconductor as part of the doping process. The addition of the electrons is the key to increasing the semiconductor’s conductivity. The compound belongs to a newly-introduced class of dopants called dimeric organometallic dopants. Unlike many other powerful reducing agents, these dopants are stable when exposed to air but still work as strong electron donors both in solution and solid state.
Seth Marder and Steve Barlow from Georgia Tech, who led the development of the new dopant, called the ruthenium compound a “hyper-reducing dopant.” They said it is unusual, not only its combination of electron donation strength and air stability, but in its ability to work with a class of organic semiconductors that have previously been very difficult to dope. In studies conducted at Princeton, the researchers found that the new dopant increased the conductivity of these semiconductors about a million times.
The ruthenium compound is a dimer, which means it consists of two identical molecules, or monomers, connected by a chemical bond. As is, the compound is relatively stable and, when added to these difficult-to-dope semiconductors, it does not react and remains in its equilibrium state. That posed a problem because to increase the conductivity of the organic semiconductor, the ruthenium dimer needs to split and release its two identical monomers.
Lin, the Princeton doctoral student who was lead author of the Nature Materials article, said the researchers looked for different ways to break up the ruthenium dimer and activate the doping. Eventually, he and Berthold Wegner, a visiting graduate student from the group of Norbert Koch at Humboldt University, hit upon adding energy by irradiating it with ultraviolet light, which effectively excited molecules in the semiconductor and initiated the reaction. Under exposure to the light, the dimers split into monomers, and the conductivity rose.
After that, the researchers made an interesting observation.
“Once the light is turned off, one might naively expect the reverse reaction to occur” and the increased conductivity to disappear, Marder said in an email. “However, this is not the case.”
The researchers found that the ruthenium monomers remained isolated in the semiconductor _ increasing conductivity _ even though thermodynamics should return the molecules to their original configuration as dimers. Antoine Kahn, a Princeton professor who leads the research team, said the physical layout of the molecules inside the doped semiconductor provides a likely answer to this puzzle. The hypothesis is that the monomers are scattered in the semiconductor in such a way that it is very difficult for them to return to their original configuration and re-form the ruthenium dimer. To reform, he said, the monomers must be facing in the correct orientation, but in the mixture they remain askew. So, even though thermodynamics shows that dimers should reform, most never snap back together.
“The question is why aren’t these things moving back together into equilibrium,” said Kahn, the Stephen C. Macaleer ’63 Professor in Engineering and Applied Science. “The answer is they are kinetically trapped.”
In fact, the researchers observed the doped semiconductor for over a year and found very little decrease in the electrical conductivity. Also, by observing the material in light-emitting diodes fabricated by the group of Barry Rand, an assistant professor of electrical engineering at Princeton and the Andlinger Center for Energy and the Environment, the researchers discovered that doping was continuously re-activated by the light produced by the device.
The light activates the system more, which leads to more light production and more activation until the system is fully activated, Marder said. “This alone is a novel and surprising observation.”
The Latest on: Organic electronics
- The potential of flexible OLEDs as an innovative surface material on April 18, 2019 at 5:52 am
Such products usually incorporate reflective strips for added visibility at night-time, but thanks to organic electronics, rider safety will now be improved further. Partners of the EU-funded PI ... […]
- New Thermoelectric Polymer Used For Ultra-Sensitive Heat Sensor on April 18, 2019 at 2:20 am
A team at the Laboratory of Organic Electronics at Linköping University in Sweden has developed the sensor thanks to a unique thermoelectric polymer, which provides the significant boost in ... […]
- Organic Electronics Materials Market to Set Phenomenal Growth by 2025: AU Optronics, Sony, Sumitomo, BASF, Merck on April 15, 2019 at 5:03 am
Edison, NJ -- (SBWIRE) -- 04/15/2019 -- HTF MI presents an in-depth overview of the Global Organic Electronics Materials Market Study, detailing the latest product / industry coverage and market ... […]
- Computer Models Simplify the Synthesis of Organic Electronics on April 9, 2019 at 7:31 am
Organic electronics could change the electronics industry with their high cost-efficiencies and versatility compared with more commonly used inorganic electronics. For example, their flexibility could ... […]
- Global Printable, Flexible, Stretchable and Organic Electronics Market to 2030 with Profiles of 350+ Producers & Product Developers on April 8, 2019 at 9:00 am
DUBLIN, April 8, 2019 /PRNewswire/ -- The "The Global Market for Printable, Flexible, Stretchable and Organic Electronics to 2030" report has been added to ResearchAndMarkets.com's offering. Potential ... […]
- Optoelectronic control of single cells using organic photocapacitors on April 5, 2019 at 7:18 pm
1 Laboratory of Organic Electronics, ITN Campus Norrköping, Linköping University, SE-60221 Norrköping, Sweden. 2 Department of Clinical and Experimental Medicine, Linköping University, SE-58185 ... […]
- Tunable organic electronics pave the way for better flexible displays on March 23, 2019 at 5:00 pm
Researchers at Kyushu University in Japan have devised a simple way to tweak the properties of organic light-emitting diodes (OLEDs) while increasing emission efficiency eight-fold. The development ... […]
- Developing new organic materials for electronics on March 22, 2019 at 2:27 pm
A scientist has new ways of accelerating the development of new organic materials for electronics. The new approaches could have applications in other types of materials science research. Organic ... […]
- New approach to molecular modeling may accelerate the development of new organic materials for electronics on March 22, 2019 at 11:49 am
Organic electronics have the potential to revolutionize technology with their high cost-efficiency and versatility compared with more commonly used inorganic electronics. For example, their ... […]
- Organic Electronics Market Growing Demand and Trends 2019 to 2028 on March 19, 2019 at 8:29 pm
Mar 20, 2019 (WiredRelease via COMTEX) -- Organic electronics is a field of electronics that is related and deals with materials science concerning with design, formulation, synthesis, and application ... […]
via Google News and Bing News