The temporary structures, which can be degraded away with a biocompatible chemical trigger, could be useful in fabricating microfluidic devices, creating biomaterials that respond dynamically to stimuli and in patterning artificial tissue.
Brown University engineers have demonstrated a technique for making 3-D-printed biomaterials that can degrade on demand, which can be useful in making intricately patterned microfluidic devices or in making cell cultures than can change dynamically during experiments.
“It’s a bit like Legos,” said Ian Wong, an assistant professor in Brown’s School of Engineering and co-author of the research. “We can attach polymers together to build 3-D structures, and then gently detach them again under biocompatible conditions.”
The research is published in the journal Lab on a Chip.
The Brown team made their new degradable structures using a type of 3-D printing called stereolithography. The technique uses an ultraviolet laser controlled by a computer-aided design system to trace patterns across the surface of a photoactive polymer solution. The light causes the polymers to link together, forming solid 3-D structures from the solution. The tracing process is repeated until an entire object is built from the bottom up.
Stereolithographic printing usually uses photoactive polymers that link together with covalent bonds, which are strong but irreversible. For this new study, Wong and his colleagues wanted to try creating structures with potentially reversible ionic bonds, which had never been done before using light-based 3-D printing. To do it, the researchers made precursor solutions with sodium alginate, a compound derived from seaweed that is known to be capable of ionic crosslinking.
“The idea is that the attachments between polymers should come apart when the ions are removed, which we can do by adding a chelating agent that grabs all the ions,” Wong said. “This way we can pattern transient structures that dissolve away when we want them to.”
The researchers showed that alginate could indeed be used in stereolithography. And by using different combinations of ionic salts — magnesium, barium and calcium — they could create structures with varying stiffness, which could then be dissolved away at varying rates.
The research also showed several ways in such temporary alginate structures could be useful.
“It’s a helpful tool for fabrication,” said Thomas M. Valentin, a Ph.D. student in Wong’s lab at Brown and the study’s lead author. The researchers showed that they could use alginate as a template for making lab-on-a-chip devices with complex microfluidic channels.
“We can print the shape of the channel using alginate, then print a permanent structure around it using a second biomaterial,” Valentin said. “Then we simply dissolve away the alginate and we have a hollow channel. We don’t have to do any cutting or complex assembly.”
The researchers also showed that degradable alginate structures are useful for making dynamic environments for experiments with live cells. They performed a series of experiments with alginate barriers surrounded by human mammary cells, observing how the cells migrate when the barrier is dissolved away. These kinds of experiments can be useful in investigating wound-healing processes or the migration of cells in cancer.
The experiments showed that neither the alginate barrier nor the chelating agent used to dissolve it away had any appreciable toxicity to the cells. That suggests that degradable alginate barriers are a promising option for such experiments.
The biocompatibility of the alginate is promising for additional future applications, including in making scaffolds for artificial tissue and organs, the researchers say.
“We can start to think about using this in artificial tissues where you might want channels running through it that mimic blood vessels,” Wong said. “We could potentially template that vasculature using alginate and then dissolve it away like we did for the microfluidic channels.”
The researchers plan to continue experimenting with their alginate structures, looking for ways to fine-tune their strength and stiffness properties, as well as the pace of degradation.
The Latest on: 3-D-printed biomaterials
- 3D printed bioceramic stents inspired by lotus root structure improve vascularization and bone growth on November 6, 2017 at 12:00 am
Of equal importance to the implant’s structure is the biomaterial it is made from, which also encourages natural bone regeneration. The material in question is a silicate-based bioceramic called akermanite, which the researchers found was highly ... […]
- Researchers develop 3-D-printed biomaterials that degrade on demand on September 7, 2017 at 9:45 am
Brown researchers have found a way to 3-D print intricate temporary microstructures that can be degraded on demand using a biocompatible chemical trigger. The technique could be useful could be useful in fabricating microfluidic devices, creating ... […]
- Fifth-grader tests 3-D printed robotic arm to help others on April 17, 2017 at 2:44 pm
That will be up to her to figure out. And researchers at the biomaterials laboratory will be studying her, trying to figure it out, too. Delanie Gallagher of Spanish Lake, Mo., is the first of 10 children researchers plan to enroll in a study trying to ... […]
- 5th-grader in Spanish Lake tests her new robotic arm to help other kids on December 17, 2016 at 10:21 am
That will be up to her to figure out. And researchers at the biomaterials laboratory will be studying her, trying to figure it out, too. Delanie Gallagher of Spanish Lake is the first of 10 children researchers plan to enroll in a study trying to determine ... […]
- San Diego Company Aims To Create 3-D Printed Liver Transplants on October 5, 2016 at 6:36 am
The company's 3-D printed organ tissue is already being used by pharmaceutical ... In an email to KPBS, Shaochen Chen — co-director of the Biomaterials and Tissue Engineering Center at UC San Diego — said Organovo will have to overcome potential ... […]
- New 3-D printable ink for rapid bone regeneration on September 28, 2016 at 5:00 pm
They might face years of difficulty," said Shah, who led the research. Shahs 3-D printed biomaterial is a mix of hydroxyapatite - a calcium mineral found naturally in human bone - and a biocompatible, biodegradable polymer that is used in many medical ... […]
- The Search for Better Bone Replacement: 3-D Printed Bone with Just the Right Mix of Ingredients on May 4, 2016 at 7:00 am
That’s the recipe for success reported by researchers at The Johns Hopkins University in a paper published April 18 online in ACS Biomaterials Science & Engineering. Each year, the Johns Hopkins scientists say, birth defects, trauma or surgery leave an ... […]
- Changing medicine with 3-D bioprinting, where organs can be synthesized by technology on February 22, 2015 at 4:00 pm
But the potential of the technology is nothing short of staggering: Chen and other researchers have already 3-D-printed an artificial cornea ... Chen is a founding co-director of the university's Biomaterials and Tissue Engineering Center and also a ... […]
- DNA 'glue' could someday be used to build tissues, organs on January 14, 2015 at 10:51 am
But now researchers report an initial study showing that the strands can also act as a glue to hold together 3-D-printed materials that could ... process is described in the brand-new journal ACS Biomaterials Science & Engineering. Andrew Ellington and ... […]
via Google News and Bing News