Aug 162017

Columbia researchers wired a single molecular cluster to gold electrodes to show that it exhibits a quantized and controllable flow of charge at room temperature.
—Photo courtesy of Bonnie Choi/Columbia University

Columbia Engineering researchers are first to reproducibly achieve the current blockade effect using atomically precise molecules at room temperature, a result that could lead to shrinking electrical components and boosting data storage and computing power.

A major goal in the field of molecular electronics, which aims to use single molecules as electronic components, is to make a device where a quantized, controllable flow of charge can be achieved at room temperature. A first step in this field is for researchers to demonstrate that single molecules can function as reproducible circuit elements such as transistors or diodes that can easily operate at room temperature.

A team led by Latha Venkataraman, professor of applied physics and chemistry at Columbia Engineering and Xavier Roy, assistant professor of chemistry (Arts & Sciences), published a study (DOI 10.1038/nnano.2017.156) today in Nature Nanotechnology that is the first to reproducibly demonstrate current blockade—the ability to switch a device from the insulating to the conducting state where charge is added and removed one electron at a time—using atomically precise molecular clusters at room temperature.

Bonnie Choi, a graduate student in the Roy group and co-lead author of the work, created a single cluster of geometrically ordered atoms with an inorganic core made of just 14 atoms—resulting in a diameter of about 0.5 nanometers—and positioned linkers that wired the core to two gold electrodes, much as a resistor is soldered to two metal electrodes to form a macroscopic electrical circuit (e.g. the filament in a light bulb).

The researchers used a scanning tunneling microscope technique that they have pioneered to make junctions comprising a single cluster connected to the two gold electrodes, which enabled them to characterize its electrical response as they varied the applied bias voltage. The technique allows them to fabricate and measure thousands of junctions with reproducible transport characteristics.

“We found that these clusters can perform very well as room-temperature nanoscale diodes whose electrical response we can tailor by changing their chemical composition,” says Venkataraman. “Theoretically, a single atom is the smallest limit, but single-atom devices cannot be fabricated and stabilized at room temperature. With these molecular clusters, we have complete control over their structure with atomic precision and can change the elemental composition and structure in a controllable manner to elicit certain electrical response.”

A number of studies have used quantum dots to produce the similar effects but because the dots are much larger and not uniform in size, due to the nature of their synthesis, the results have not been reproducible—not every device made with quantum dots behaved the same way. The Venkataraman-Roy team worked with smaller inorganic molecular clusters that were identical in shape and size, so they knew exactly—down to the atomic scale—what they were measuring.

“Most of the other studies created single-molecule devices that functioned as single-electron transistors at four degrees Kelvin, but for any real-world application, these devices need to work at room temperature. And ours do,” says Giacomo Lovat, a postdoctoral researcher and co-lead author of the paper. “We’ve built a molecular-scale transistor with multiple states and functionalities, in which we have control over the precise amount of charge that flows through. It’s fascinating to see that simple chemical changes within a molecule, can have a profound influence on the electronic structure of molecules, leading to different electrical properties.”

The team evaluated the performance of the diode through the on/off ratio, which is the ratio between the current flowing through the device when it is switched on and the residual current still present in its “off” state. At room temperature, they observed an on/off ratio of about 600 in single-cluster junctions, higher than any other single-molecule devices measured to date. Particularly interesting was the fact that these junctions were characterized by a “sequential” mode of charge flow; each electron transiting through a cluster junction stopped on the cluster for a while. Usually, in small-molecule junctions, electrons “pushed” through the junction by the applied bias make the leap continuously, from one electrode into the other, so that the number of electrons on the molecule at each instant of time is not well-defined.

“We say the cluster becomes ‘charged’ since, for a short time interval before the transiting electron jumps off into the other metal electrode, it stores one extra charge,” says Roy. “Such sequential, or discrete, conduction mode is due to the cluster’s peculiar electronic structure that confines electrons in strongly localized orbitals. These orbitals also account for the observed ‘current blockade’ regime when a low bias voltage is applied to a cluster junction. The current drops to a very small value at low voltage as electrons in the metal contact don’t have enough energy to occupy one of the cluster orbitals. As the voltage is increased, the first cluster orbital that becomes energetically accessible opens up a viable route for electrons that can now jump on and off the cluster, resulting in consecutive ‘charging’ and ‘discharging’ events. The blockade is lifted, and current starts flowing across the junction.”

The researchers tailored the clusters to explore the impact of compositional change on the clusters’ electrical response and plan to build upon their initial study. They will design improved cluster systems with better electrical performances (e.g. higher on/off current ratio, different accessible states), and increase the number of atoms in the cluster core while maintaining the atomic precision and uniformity of the compound. This would increase the number of energy levels, each corresponding to a certain electron orbit that they can access with their voltage window. Increasing the energy levels would impact the on/off ratio of the device, perhaps also decreasing the power needed for switching on the device if more energy levels become accessible for transiting electrons at low bias voltages.

“Most single-molecule transport investigations have been performed on simple organic molecules because they are easier to work with,” Venkataraman notes. “Our collaborative effort here through the Columbia Nano Initiative bridges chemistry and physics, enabling us to experiment with new compounds, such as these molecular clusters, that may not only be more synthetically challenging, but also more interesting as electrical components.”

Learn more: Single Molecules Can Work as Reproducible Transistors—at Room Temperature


The Latest on: Single molecule electronics
  • Global Molecular Electronics Market - Analysis & Forecasts to 2022 - Research and Markets
    on November 16, 2017 at 6:07 am

    Molecular electronics, also called moletronics ... The growing need for having single molecule components/devices, its advantages, are the major drivers of the market. However, controlled fabrication to within specified tolerances and its experimental ... […]

  • Electronic Skin Lights Up When Injured
    on November 8, 2017 at 10:34 am

    Current electronic-skin designs contain integrated electrical sensors ... The narrow range of pressure sensitivity in these single-mode e-skins limits their application in biomimetic robots and prosthetics for amputees. Now, a group of researchers from ... […]

  • Single-Molecule Transistors Get Reproducibility and Room-Temperature Operation
    on August 14, 2017 at 1:52 pm

    “By changing the electrostatic environment around the cluster, we allow its charge state to be modified enabling a current to flow across the single-molecule junction ... is due to the cluster's peculiar electronic structure that confines electrons ... […]

  • Columbia Engineering-led team advances single molecule electronic DNA sequencing
    on April 22, 2016 at 5:56 am

    Researchers from Columbia University, with colleagues at Genia Technologies (Roche), Harvard University and the National Institute of Standards and Technology (NIST) report achieving real-time single molecule electronic DNA sequencing at single-base ... […]

  • Team advances single molecule electronic DNA sequencing
    on April 21, 2016 at 3:00 pm

    Single-molecule nanopore DNA sequencing by synthesis data from a template with homopolymer sequences. Credit: Jingyue Ju,Columbia Engineering Researchers from Columbia University, with colleagues at Genia Technologies (Roche), Harvard University and the ... […]

  • Scientists Create World’s Smallest Diode Using A Single Molecule Of DNA
    on April 5, 2016 at 1:11 am

    a team of researchers from the University of Georgia and Israel's Ben-Gurion University of the Negev announced Monday it has developed a diode made from a single DNA molecule. Diodes are electronic devices that allow current to flow easily in one direction ... […]

  • This Is the First Single-Molecule Diode That Could Actually Be Useful
    on May 25, 2015 at 11:00 pm

    That means the device, which uses a single thiophene-1,1-dioxide molecule surrounded by an ionic liquid, could actually be used in nano-scale electronic systems, unlike its predecessors. Perhaps unsurprisingly, though, the team are already trying to ... […]

  • Single-molecule junctions beyond electronic transport
    on October 21, 2012 at 5:00 pm

    The idea of using individual molecules as active electronic components provided the impetus to develop a variety of experimental platforms to probe their electronic transport properties. Among these, single-molecule junctions in a metal–molecule–metal ... […]

  • Single molecule circuit controlled through quantum interference
    on March 27, 2012 at 5:30 am

    In typical electronic devices, temperature is the primary physical ... managed to promote destructive quantum interference between electrons in a single molecule, reducing the molecule's ability to conduct current in the process. They compared the ... […]

  • Truly Micro Electronics in a Single Molecule
    on March 23, 2006 at 4:00 pm

    SAN FRANCISCO, March 23 - In an advance suggesting that a new kind of ultrasmall computing circuit may one day be produced using conventional chip-making equipment, I.B.M. researchers have succeeded in fashioning an electronic circuit around a single ... […]

via Google News and Bing News

Leave a Reply

%d bloggers like this: