Imagine slipping into a jacket, shirt or skirt that powers your cell phone, fitness tracker and other personal electronic devices as you walk, wave and even when you are sitting down.
A new, ultrathin energy harvesting system developed at Vanderbilt University’s Nanomaterials and Energy Devices Laboratory has the potential to do just that. Based on battery technology and made from layers of black phosphorus that are only a few atoms thick, the new device generates small amounts of electricity when it is bent or pressed even at the extremely low frequencies characteristic of human motion.
“In the future, I expect that we will all become charging depots for our personal devices by pulling energy directly from our motions and the environment,” said Assistant Professor of Mechanical Engineering Cary Pint, who directed the research.
The new energy harvesting system is described in a paper titled “Ultralow Frequency Electrochemical Mechanical Strain Energy Harvester using 2D Black Phosphorus Nanosheets” published Jul. 21 online by the journal ACS Energy Letters.
“This is timely and exciting research given the growth of wearable devices such as exoskeletons and smart clothing, which could potentially benefit from Dr. Pint’s advances in materials and energy harvesting,” observed Karl Zelik, assistant professor of mechanical and biomedical engineering at Vanderbilt, an expert on the biomechanics of locomotion who did not participate in the device’s development.
Currently, there is a tremendous amount of research aimed at discovering effective ways to tap ambient energy sources. These include mechanical devices designed to extract energy from vibrations and deformations; thermal devices aimed at pulling energy from temperature variations; radiant energy devices that capture energy from light, radio waves and other forms of radiation; and, electrochemical devices that tap biochemical reactions.
“Compared to the other approaches designed to harvest energy from human motion, our method has two fundamental advantages,” said Pint. “The materials are atomically thin and small enough to be impregnated into textiles without affecting the fabric’s look or feel and it can extract energy from movements that are slower than 10 Hertz—10 cycles per second—over the whole low-frequency window of movements corresponding to human motion.”
“When you look at Usain Bolt, you see the fastest man on Earth. When I look at him, I see a machine working at 5 Hertz,”Doctoral students Nitin Muralidharan and Mengya Lico-led the effort to make and test the devices. “When you look at Usain Bolt, you see the fastest man on Earth. When I look at him, I see a machine working at 5 Hertz,” said Muralidharan.
Extracting usable energy from such low frequency motion has proven to be extremely challenging. For example, a number of research groups are developing energy harvesters based on piezoelectric materials that convert mechanical strain into electricity. However, these materials often work best at frequencies of more than 100 Hertz. This means that they don’t work for more than a tiny fraction of any human movement so they achieve limited efficiencies of less than 5-10 percent even under optimal conditions.
“Our harvester is calculated to operate at over 25 percent efficiency in an ideal device configuration, and most importantly harvest energy through the whole duration of even slow human motions, such as sitting or standing,” Pint said.
The Vanderbilt lab’s ultrathin energy harvester is based on the group’s research on advanced battery systems. Over the past 3 years, the team has explored the fundamental response of battery materials to bending and stretching. They were the first to demonstrate experimentally that the operating voltage changes when battery materials are placed under stress. Under tension, the voltage rises and under compression, it drops.
The team collaborated with Greg Walker, associate professor of mechanical engineering, who used computer models to validate these observations for lithium battery materials. Results of the study were published Jun. 27 in the journal ACS Nano in an article titled “The MechanoChemistry of Lithium Battery Electrodes.”
These observations led Pint’s team to reconstruct the battery with both positive and negative electrodes made from the same material. Although this prevents the device from storing energy, it allows it to fully exploit the voltage changes caused by bending and twisting and so produce significant amounts of electrical current in response to human motions.
The lab’s initial studies were published in 2016. They were further inspired by a parallel breakthrough by a group at Massachusetts Institute of Technology who produced a postage-stamp-sized device out of silicon and lithium that harvested energy via the effect Pint and his team were investigating.
In response, the Vanderbilt researchers decided to go as thin as possible by using black phosphorus nanosheets: A material has become the latest darling of the 2D materials research community because of its attractive electrical, optical and electrochemical properties.
Because the basic building blocks of the harvester are about 1/5000th the thickness of a human hair, the engineers can make their devices as thin or as thick as needed for specific applications. They have found that bending their prototype devices produces as much as 40 microwatts per square foot and can sustain current generation over the full duration of movements as slow as 0.01 Hertz, one cycle every 100 seconds.
The researchers acknowledge that one of the challenges they face is the relatively low voltage that their device produces. It’s in the millivolt range. However, they are applying their fundamental insights of the process to step up the voltage. They are also exploring the design of electrical components, like LCD displays, that operate at lower than normal voltages.
“One of the peer reviewers for our paper raised the question of safety,” Pint said. “That isn’t a problem here. Batteries usually catch on fire when the positive and negative electrodes are shorted, which ignites the electrolyte. Because our harvester has two identical electrodes, shorting it will do nothing more than inhibit the device from harvesting energy. It is true that our prototype will catch on fire if you put it under a blowtorch but we can eliminate even this concern by using a solid-state electrolyte.”
One of the more futuristic applications of this technology might be electrified clothing. It could power clothes impregnated with liquid crystal displays that allow wearers to change colors and patterns with a swipe on their smartphone. “We are already measuring performance within the ballpark for the power requirement for a medium-sized low-power LCD display when scaling the performance to thickness and areas of the clothes we wear.” Pint said.
Pint also believes there are potential applications for their device beyond power systems. “When incorporated into clothing, our device can translate human motion into an electrical signal with high sensitivity that could provide a historical record of our movements. Or clothes that track our motions in three dimensions could be integrated with virtual reality technology. There are many directions that this could go.”
The Latest on: Energy harvesting device
- Energy Harvesting Equipment market - Industry Insights By Growth, Emerging Trends And Forecast By 2026on August 30, 2019 at 3:01 am
Some applications of energy harvesting equipment include remote corrosion monitoring systems, implantable devices and remote patient monitoring, structural monitoring, RFID, Internet of Things, and ...
- Prototyping with Solar Energy Harvestingon August 29, 2019 at 3:49 pm
A growing interest in energy harvesting has been fueled by the trend of electronics becoming lower and lower power. Many of the sensors and wireless devices of the booming IoT industry could be fully ...
- Energy Harvesting Market to Make Great Impact in Near Future by 2020on August 29, 2019 at 3:43 am
This is a major driver of market growth, expected to continue pushing the demand for devices based on the energy harvesting technology. Growing applications of the energy harvesting technology in ...
- Super-porous device harvests water from desert air using nothing but solar poweron August 28, 2019 at 3:31 pm
Used in a new water-harvesting device, each kilogram of the material reportedly produced 0.7 litre of water – about one-and-a-quarter pints – per day from the arid air of California’s Mojave Desert.
- Managing the IoT on an energy budgeton August 28, 2019 at 12:25 am
Designing with energy harvesting In general, energy harvesting looks like a ... On Silicon Labs’ EFM32 products, all pins are floating when the device comes out of reset, which, in this scenario, is ...
- Ultra-low-power Bluetooth devices might eliminate need for batterieson August 27, 2019 at 9:04 am
and Controlled Energy Harvesting. The first is aimed at solving the energy and management challenges of IoT devices such as beacons and fitness trackers. Atmosic's controlled energy harvesting brings ...
- Optimizing non-volatile data-logging for energy harvesting IoT sensor nodeson August 27, 2019 at 6:50 am
These devices are typically powered by batteries or by energy harvested from solar, vibration, or heat sources. Energy harvesting is desirable as it eliminates the need for battery maintenance and ...
- Silicon nanoblades convert waste heat into energyon August 27, 2019 at 2:34 am
but the primary hurdles for widespread thermoelectric harvesting have been efficiency and cost. “Thermoelectric generation has been expensive, both in terms of cost per device and cost per watt of ...
- Physicists' study demonstrates silicon's energy-harvesting poweron August 25, 2019 at 11:09 pm
The primary hurdles for widespread thermoelectric harvesting have been efficiency and cost, he said. "Thermoelectric generation has been expensive, both in terms of cost per device and cost per watt ...
- Nylon as a building block for transparent electronic devices?on August 19, 2019 at 5:36 am
Ferroelectric materials are used in sensors, actuators, memory and energy-harvesting devices. The advantage in using polymers is that they can be liquified using adequate solvents and therefore ...
via Google News and Bing News