Direct conversion of rusty stainless steel mesh into stable, low-cost electrodes for potassium-ion batteries
Chinese scientists have made good use of waste while finding an innovative solution to a technical problem by transforming rusty stainless steel mesh into electrodes with outstanding electrochemical properties that make them ideal for potassium-ion batteries. As reported in the journal Angewandte Chemie, the rust is converted directly into a compact layer with a grid structure that can store potassium ions. A coating of reduced graphite oxide increases the conductivity and stability during charge/discharge cycles.
Increasing use of renewable energy requires effective energy storage within the grid. Lithium ion batteries, widely used in portable electronics, are promising candidates. Lithium ion batteries are based on the displacement of lithium ions. While charging, the ions move toward the graphite electrode, where they are stored between the layers of carbon. When discharging, they are released. However, lithium is expensive and reserves are limited. Sodium ion batteries have been explored as an alternative.
“Potassium ions are just as inexpensive and readily available as sodium, and potassium ion batteries would be superior from the electric aspect,” reports Xin-Bo Zhang. “However, the significantly larger radius of the potassium ions has posed a problem. Repeated storage and release of these ions destabilizes the materials currently used in electrodes.”
Zhang and a team from the Chinese Academy of sciences and Jilin University (Changchun, China) have now found an elegant solution in their use of a waste material to make novel electrodes: rejected stainless steel mesh from filters and sieves. Despite the excellent durability of these grids, harsh conditions do lead to some corrosion. The metal can be reclaimed in a furnace, but this process requires a great deal of money, time, and energy, as well as producing emissions. Says Zhang: “Conversion into electrodes could develop into a more ecologically and economically sensible form of recycling.”
The corroded mesh is dipped into a solution of potassium ferrocyanide (yellow prussiate of potash, known as a fining agent for wine). This dissolves iron, chromium, and nickel ions out of the rust layer. These combine with ferricyanide ions into the complex salt known as Prussian blue, a dark blue pigment that is deposited onto the surface of the mesh as scaffold-like nanocubes. Potassium ions can easily and rapidly be stored in and released from these structures.
The researchers then use a dip-coating process to deposit a layer of graphene oxide (oxidized graphite layers). This layer nestles tightly onto the nanocubes. Subsequent reduction converts the graphene oxide to reduced graphene oxide (RGO), which consists of layers of graphite with isolated oxygen atoms. Zhang explains, “the RGO coating inhibits clumping and detachment of the active material. At the same time, it significantly increases the conductivity and opens ultrafast electron-transport pathways.”
In tests, coin cells made with these new electrodes demonstrate excellent capacity, discharge voltages, rate capability, and outstanding cycle stability. Because the inexpensive, binder-free electrodes are very flexible, they are highly suitable for use in flexible electronic devices.
Learn more: Batteries from scrap metal
The Latest on: Potassium-ion batteries
- Purdue Energizes Battery Technology on July 30, 2018 at 10:46 pm
Anodes in most lithium-ion batteries are made of graphite. “Carbon nanofibers demonstrate great potential as an anode material for potassium-ion batteries,” Pol says. “We studied batteries for up to 1 ... […]
- Power/Performance Bits: June 20 on June 19, 2018 at 5:00 pm
Scientists at the Chinese Academy of Sciences and Jilin University found a method to transform rusty stainless steel mesh into electrodes with outstanding electrochemical properties that make them ide... […]
- Sodium- and Potassium-based Batteries Hold Promise for Cheap Energy Storage on June 18, 2018 at 5:00 pm
“One of the biggest obstacles for sodium- and potassium-ion batteries has been that they tend to decay and degrade faster and hold less energy than alternatives,” said Matthew McDowell, an assistant p... […]
- Chemical Engineering researchers receive NSF funding to investigate potassium ion battery safety on June 10, 2018 at 12:56 pm
A team of Purdue Chemical Engineering researchers has been awarded funding from the National Science Foundation (NSF) to evaluate and improve the safety-related characteristics of potassium-ion batter... […]
- Recycled steel could herald new era for batteries on October 16, 2017 at 9:57 pm
Researchers from the Chinese Academy of Sciences and Jilin University have developed an innovative, environmentally friendly method of recycling stainless steel to make novel electrodes for potassium- ... […]
via Google News and Bing News