Material can filter nanometer-sized molecules at 10 to 100 times the rate of commercial membranes.
Dialysis, in the most general sense, is the process by which molecules filter out of one solution, by diffusing through a membrane, into a more dilute solution. Outside of hemodialysis, which removes waste from blood, scientists use dialysis to purify drugs, remove residue from chemical solutions, and isolate molecules for medical diagnosis, typically by allowing the materials to pass through a porous membrane.
Today’s commercial dialysis membranes separate molecules slowly, in part due to their makeup: They are relatively thick, and the pores that tunnel through such dense membranes do so in winding paths, making it difficult for target molecules to quickly pass through.
Now MIT engineers have fabricated a functional dialysis membrane from a sheet of graphene — a single layer of carbon atoms, linked end to end in hexagonal configuration like that of chicken wire. The graphene membrane, about the size of a fingernail, is less than 1 nanometer thick. (The thinnest existing memranes are about 20 nanometers thick.) The team’s membrane is able to filter out nanometer-sized molecules from aqueous solutions up to 10 times faster than state-of-the-art membranes, with the graphene itself being up to 100 times faster.
While graphene has largely been explored for applications in electronics, Piran Kidambi, a postdoc in MIT’s Department of Mechanical Engineering, says the team’s findings demonstrate that graphene may improve membrane technology, particularly for lab-scale separation processes and potentially for hemodialysis.
“Because graphene is so thin, diffusion across it will be extremely fast,” Kidambi says. “A molecule doesn’t have to do this tedious job of going through all these tortuous pores in a thick membrane before exiting the other side. Moving graphene into this regime of biological separation is very exciting.”
Kidambi is a lead author of a study reporting the technology, published today in Advanced Materials. Six co-authors are from MIT, including Rohit Karnik, associate professor of mechanical engineering, and Jing Kong, associate professor of electrical engineering.
To make the graphene membrane, the researchers first used a common technique called chemical vapor deposition to grow graphene on copper foil. They then carefully etched away the copper and transferred the graphene to a supporting sheet of polycarbonate, studded throughout with pores large enough to let through any molecules that have passed through the graphene. The polycarbonate acts as a scaffold, keeping the ultrathin graphene from curling up on itself.
The researchers looked to turn graphene into a molecularly selective sieve, letting through only molecules of a certain size. To do so, they created tiny pores in the material by exposing the structure to oxygen plasma, a process by which oxygen, pumped into a plasma chamber, can etch away at materials.
“By tuning the oxygen plasma conditions, we can control the density and size of pores we make, in the areas where the graphene is pristine,” Kidambi says. “What happens is, an oxygen radical comes to a carbon atom [in graphene] and rapidly reacts, and they both fly out as carbon dioxide.”
What is left is a tiny hole in the graphene, where a carbon atom once sat. Kidambi and his colleagues found that the longer graphene is exposed to oxygen plasma, the larger and more dense the pores will be. Relatively short exposure times, of about 45 to 60 seconds, generate very small pores.
The researchers tested multiple graphene membranes with pores of varying sizes and distributions, placing each membrane in the middle of a diffusion chamber. They filled the chamber’s feed side with a solution containing various mixtures of molecules of different sizes, ranging from potassium chloride (0.66 nanometers wide) to vitamin B12 (1 to 1.5 nanometers) and lysozyme (4 nanometers), a protein found in egg white. The other side of the chamber was filled with a dilute solution.
The team then measured the flow of molecules as they diffused through each graphene membrane.
Membranes with very small pores let through potassium chloride but not larger molecules such as L-tryptophan, which measures only 0.2 nanometers wider. Membranes with larger pores let through correspondingly larger molecules.
The team carried out similar experiments with commercial dialysis membranes and found that, in comparison, the graphene membranes performed with higher “permeance,” filtering out the desired molecules up to 10 times faster.
Kidambi points out that the polycarbonate support is etched with pores that only take up 10 percent of its surface area, which limits the amount of desired molecules that ultimately pass through both layers.
“Only 10 percent of the membrane’s area is accessible, but even with that 10 percent, we’re able to do better than state-of-the-art,” Kidambi says.
To make the graphene membrane even better, the team plans to improve the polycarbonate support by etching more pores into the material to increase the membrane’s overall permeance. They are also working to further scale up the dimensions of the membrane, which currently measures 1 square centimeter. Further tuning the oxygen plasma process to create tailored pores will also improve a membrane’s performance — something that Kidambi points out would have vastly different consequences for graphene in electronics applications.
“What’s exciting is, what’s not great for the electronics field is actually perfect in this [membrane dialysis] field,” Kidambi says. “In electronics, you want to minimize defects. Here you want to make defects of the right size. It goes to show the end use of the technology dictates what you want in the technology. That’s the key.”
The Latest on: Graphene membrane
MIT researchers develop scalable manufacturing process for graphene sheets
on April 18, 2018 at 11:22 pm
MIT engineers say they've now developed a scalable production process for precisely tailored graphene filtration membranes, which could see action in desalination, biological separation and other applications. Graphene is an ultra-light, ultra-strong ... […]
Graphene changes elastic properties depending on applied force
on April 18, 2018 at 12:36 pm
They tend to turn graphene from a flat state into a crumpled state. "This is called a crumpling transition," Kachorovskii explains. "For a long time the theory of membranes predicted that due to this phenomenon two-dimensional crystals such as graphene ... […]
MIT just discovered a way to mass-produce graphene in long rolls
on April 18, 2018 at 11:46 am
Scientists used to make graphene-based membranes in small batches in a laboratory. But a new breakthrough at MIT enables researchers to spool out long rolls of high-quality graphene. The continuous manufacturing process can produce five centimeters of high ... […]
A graphene roll-out
on April 18, 2018 at 6:25 am
The team’s results are the first demonstration of an industrial, scalable method for manufacturing high-quality graphene that is tailored for use in membranes that filter a variety of molecules, including salts, larger ions, proteins, or nanoparticles. […]
Scalable manufacturing process spools out strips of graphene for use in ultrathin membranes
on April 18, 2018 at 4:44 am
A new manufacturing process produces strips of graphene, at large scale, for use in membrane technologies and other applications. Credit: Christine Daniloff, MIT MIT engineers have developed a continuous manufacturing process that produces long strips of ... […]
Graphene spikes kill bacteria to reduce risk of implant rejection
on April 17, 2018 at 6:22 am
“The vertical graphene acts like a knife, it will cut into the bacteria and kill it,” said Sun. The membrane surrounding bacteria has a very strong affinity for graphene, he said. “So the bacteria will attach themselves to the graphene, and then get cut. […]
Graphene-oxide-based membranes for large-scale energy storage systems
on April 17, 2018 at 12:53 am
(Nanowerk Spotlight) As a promising large-scale energy storage technology, redox flow batteries (RFBs) are attracting increasingly more research attention. RFBs are distinct from conventional solid-state rechargeable batteries in that the active materials ... […]
Using Nanoporous Graphene for Smart Filters and Sensors
on April 16, 2018 at 7:05 am
The ability to alter graphene pores can completely change the properties of the material. By manipulating them, the graphene membrane becomes permeable, which potentially opens doors in the future for using the material as a filter. Tied-in with graphene ... […]
One step closer to using nanoporous graphene in smart filters and sensors
on April 13, 2018 at 5:15 am
The work is published in Science. The researchers have successfully synthesised a graphene membrane with pores whose size, shape and density can be tuned with atomic precision at the nanoscale. Engineering pores at the nanoscale in graphene can change its ... […]
One step closer to using nanoporous graphene membranes as smart filters and sensors
on April 12, 2018 at 11:26 am
(Nanowerk News) Researchers at the Catalan Institute of Nanoscience and Nanotechnology (ICN2), the CiQUS research centre at the University of Santiago de Compostela (USC) and the Donostia International Physics Center (DIPC) have successfully synthesised a ... […]
via Google News and Bing News