ETH material scientists have developed a new method of manufacturing ceramics that does not require the starting materials to be fired. Instead, they are compacted under high pressure at room temperature in a significantly more energy-efficient process.
The manufacture of cement, bricks, bathroom tiles and porcelain crockery normally requires a great deal of heat: a kiln is used to fire the ceramic materials at temperatures well in excess of 1,000°C. Now, material scientists from ETH Zurich have developed what seems at first glance to be an astonishingly simple method of manufacture that works at room temperature. The scientists used a calcium carbonate nanopowder as the starting material and instead of firing it, they added a small amount of water and then compacted it.
“The manufacturing process is based on the geological process of rock formation,” explains Florian Bouville, a postdoc in the group of André Studart, Professor of Complex Materials. Sedimentary rock is formed from sediment that is compressed over millions of years through the pressure exerted by overlying deposits. This process turns calcium carbonate sediment into limestone with the help of the surrounding water. As the ETH researchers used calcium carbonate with an extremely fine particle size (nanoparticles) as the starting material, their compacting process took only an hour. “Our work is the first evidence that a piece of ceramic material can be manufactured at room temperature in such a short amount of time and with relatively low pressures,” says ETH professor Studart.
Stronger than concrete
As tests have shown, the new material can withstand about ten times as much force as concrete before it breaks, and is as stiff as stone or concrete. In other words, it is just as hard to deform.
So far, the scientists have produced material samples of about the size of a one-franc piece using a conventional hydraulic press such as those normally used in industry. “The challenge is to generate a sufficiently high pressure for the compacting process. Larger workpieces require a correspondingly greater force,” says Bouville. According to the scientists, ceramic pieces the size of small bathroom tiles should theoretically be feasible.
Energy-efficient and environmentally benign
“For a long time, material scientists have been searching for a way to produce ceramic materials under mild conditions, as the firing process requires a large amount of energy,” says Studart. The new room-temperature method – which experts refer to as cold sintering – is much more energy-efficient and also enables the production of composite materials containing, for example, plastic.
The technique is also of interest with a view to a future CO2-neutral society. Specifically, the carbonate nanoparticles could conceivably be produced using CO2 captured from the atmosphere or from waste gases from thermal power stations. In this scenario, the captured CO2 is allowed to react with a suitable rock in powder form to produce carbonate, which could then be used to manufacture ceramics at room temperature. The climate-damaging CO2 would thus be stored in ceramic products in the long term. These would constitute a CO2 sink and could help thermal power stations to operate on a carbon-neutral basis.
According to the scientists, in the long term, the new approach of cold sintering even has the potential to lead to more environmentally friendly substitutes for cement-based materials. However, great research efforts are needed to reach this goal. Cement production is not only energy-intensive, but it also generates large amounts of CO2 – unlike potential cold-sintered replacement materials.
Learn more: Sustainable ceramics without a kiln
Receive an email update when we add a new SUSTAINABLE CERAMICS article.
The Latest on: Sustainable ceramics
via Google News
The Latest on: Sustainable ceramics
Redfern Mini Markt
on March 18, 2019 at 11:27 am
Head straight to Redfern this Saturday to find a winter market of vintage clothing, handmade ceramics, organic skincare and warming ... Pick up new-to-you clothing from Kitten Vintage and Dear Pluto, ... […]
An Introduction to the Braze Alloys in the Space Industry
on March 18, 2019 at 4:45 am
Yet, these ceramic sensors must then be joined to metallic parts of ... Morgan Advanced Materials is not just committed to making the space industry safer and more sustainable, but it is aiding ... […]
Historic Luck’s Cannery being renovated for multi-use community center in Seagrove
on March 15, 2019 at 4:11 pm
“This is really something that's going to take Seagrove into a sustainable future for the pottery industry and I think that's what's so special about it and it's due for southern Randolph Count […]
Environmental degradation of high-temperature protective coatings for ceramic-matrix composites in gas-turbine engines
on March 15, 2019 at 4:21 am
Replacing some of the current hot-section metallic components with ceramic-matrix composites (CMCs) is making that possible. A high-temperature ceramic coatings system, that includes ... […]
3D printing for a sustainable future
on March 15, 2019 at 3:50 am
3D printing for a sustainable future OAKLAND ... Raindrops pitter-pattered across 3D-fabricated ceramic shingles. Inside, a translucent bioplastic wall with cloudlike swirls — yes, also 3D printed — ... […]
Multi-layer Ceramic Chip Capacitor Market forecast to 2021 available in new report
on March 12, 2019 at 5:34 am
It provides you with useful insights to design forward-looking, sustainable growth programs for your business ... the scope of products offered in the global Multi-layer Ceramic Chip Capacitor market, ... […]
Multi Layer Ceramic Capacitor Market Future Outlook of Key Statistics on Industry Dynamics Ly 2025
on March 9, 2019 at 7:07 am
Multi Layer Ceramic Capacitor Market Research Report provides in-depth ... It provides you with useful insights to design forward-looking, sustainable growth programs for your business. Furthermore, ... […]
East Fork Pottery Is Redefining Sustainable Business—One Bowl at a Time
on March 6, 2019 at 12:11 am
There are probably few 21st-century business owners who can say that the spiritual foundation for their factory is based on the utopian thinking of William Morris and John Ruskin—artists and theorists ... […]
The cafe serving up sustainable ideas with their Japanese breakfasts
on March 5, 2019 at 6:42 pm
The fit-out is beautiful: there’s a counter made from local pine, big windows letting the sunlight in and ceramics by local artists ... energy Could this new cooking method be any more sustainable? It ... […]
via Bing News