Extracting energy from multiple sources could help power wearable technology.
Many forms of energy surround you: sunlight, the heat in your room and even your own movements. All that energy — normally wasted — can potentially help power your portable and wearable gadgets, from biometric sensors to smart watches. Now, researchers from the University of Oulu in Finland have found that a mineral with the perovskite crystal structure has the right properties to extract energy from multiple sources at the same time.
Perovskites are a family of minerals, many of which have shown promise for harvesting one or two types of energy at a time — but not simultaneously. One family member may be good for solar cells, with the right properties for efficiently converting solar energy into electricity. Meanwhile, another is adept at harnessing energy from changes in temperature and pressure, which can arise from motion, making them so-called pyroelectric and piezoelectric materials, respectively.
Sometimes, however, just one type of energy isn’t enough. A given form of energy isn’t always available — maybe it’s cloudy or you’re in a meeting and can’t get up to move around. Other researchers have developed devices that can harness multiple forms of energy, but they require multiple materials, adding bulk to what’s supposed to be a small and portable device.
This week in Applied Physics Letters, from AIP Publishing, Yang Bai and his colleagues at the University of Oulu explain their research on a specific type of perovskite called KBNNO, which may be able to harness many forms of energy. Like all perovskites, KBNNO is a ferroelectric material, filled with tiny electric dipoles analogous to tiny compass needles in a magnet.
When ferroelectric materials like KBNNO undergo changes in temperature, their dipoles misalign, which induces an electric current. Electric charge also accumulates according to the direction the dipoles point. Deforming the material causes certain regions to attract or repel charges, again generating a current.
Previous researchers have studied KBNNO’s photovoltaic and general ferroelectric properties, but they did so at temperatures a couple hundred degrees below freezing, and they didn’t focus on properties related to temperature or pressure. The new study represents the first time anyone has evaluated all of these properties at once above room temperature, Bai said.
The experiments showed that while KBNNO is reasonably good at generating electricity from heat and pressure, it isn’t quite as good as other perovskites. Perhaps the most promising finding, however, is that the researchers can modify the composition of KBNNO to improve its pyroelectric and piezoelectric properties. “It is possible that all these properties can be tuned to a maximum point,” said Bai, who, with his colleagues, is already exploring such an improved material by preparing KBNNO with sodium.
Within the next year, Bai said, he hopes to build a prototype multi-energy-harvesting device. The fabrication process is straightforward, so commercialization could come in just a few years once researchers identify the best material.
“This will push the development of the Internet of Things and smart cities, where power-consuming sensors and devices can be energy sustainable,” he said.
This kind of material would likely supplement the batteries on your devices, improving energy efficiency and reducing how often you need to recharge. One day, Bai said, multi-energy harvesting may mean you won’t have to plug in your gadgets anymore. Batteries for small devices may even become obsolete.
Receive an email update when we add a new PEROVSKITE article.
The Latest on: KBNNO perovskite
via Google News
The Latest on: KBNNO perovskite
- New material converts sunlight, heat, and movement into electricity—at the same time on October 1, 2017 at 5:00 pm
Like all perovskites, KBNNO is ferroelectric in nature. This means it contains tiny electric dipoles, packed with positive charges on one end and negative charges on the other, according to scientists ... […]
- Three-pronged approach to electrical power generation on February 20, 2017 at 11:59 am
This is where the new research comes in. The research has looked into a special form of perovskite called KBNNO (named after the chemical formula of the mineral - (1-x)KNbO3-xBaNi1/2Nb1/2O3-δ). This s... […]
- Triple threat: Perovskite material generates electricity from light, heat, and movement on February 9, 2017 at 6:41 pm
The type of perovskite in question is created from what is known as KBNNO, which is formed when KNbO 3 nanocrystals are modified with the addition of quantities of barium and nickel. Previous studies ... […]
- This Material Can Harvest Energy From the Sun, Heat, and Movement on February 8, 2017 at 4:00 pm
However, according to researchers Yang Bai and his colleagues at the University of Oulu, who published their study in the journal Applied Physics Letters, a specific type of perovskite material called ... […]
- Perovskites show promise as energy materials on February 7, 2017 at 4:00 pm
The experiments showed that while KBNNO is reasonably good at generating electricity from heat and pressure, it isn't quite as good as other perovskites. However, the researchers claim they can modify ... […]
- Material can turn sunlight, heat and movement into electricity — all at once on February 7, 2017 at 1:32 am
This week in Applied Physics Letters, from AIP Publishing, Yang Bai and his colleagues at the University of Oulu explain their research on a specific type of perovskite called KBNNO, which may be able ... […]
- Material can turn sunlight, heat and movement into electricity—all at once on February 6, 2017 at 4:00 pm
This week in Applied Physics Letters Yang Bai and his colleagues at the University of Oulu explain their research on a specific type of perovskite called KBNNO, which may be able to harness many forms ... […]
via Bing News