NASA has big plans for 3-D printing in space, where mined asteroid materials could resupply longer missions
The infamous NASA tool bag lost in space during a November 2008 International Space Station (ISS) maintenance mission left the crew with one less grease gun and no way to replace the missing tool. In a few years astronauts may be able to restock lost or damaged instruments by simply 3-D printing new ones.
NASA will test the feasibility of 3-D printing in a confined microgravity environmentearly next June when it sends a microwave-size printer to the ISS for a series of experiments producing plastic and composite parts and tools. If all goes well, the space agency plans to install a permanent ISS printer in 2015.
In the near term such a machine would let the ISS crew replicate odds and ends—plastic clips to anchor cargo, for example—without having to wait for the next resupply mission. Further in the future the space agency imagines a day when raw materials mined from asteroids could be delivered to aspacecraft or orbital lab and used as 3-D printing fodder. The ability to resupply far from Earth would give such a vessel the ability to carry out longer, deep-space missions, assuming myriad other sticking points are worked out—fuel, food and radiation exposure among them.
First things first: Astronauts will install the test 3-D printer—built by a company calledMade in Space—in the ISS’s Microgravity Science Glovebox, an enclosed 255-liter work space located in the European Space Agency’s Columbus laboratory module. ESA developed the work space to allow terrestrial scientists from different disciplines carry out experiments in space, aided by ISS crew members via real-time data links and video. The work space is sealed and held at a negative pressure to enable the crew to manipulate experimental hardware and samples without the danger of small parts, particulates, fluids or gases escaping into the open laboratory module.
Made in Space’s printer builds objects by first heating a thermoplastic filament and then using an extrusion head to deposit the softened material according to a blueprint dictated by a computer-aided design (CAD) file. This printing technique—commonly used by inventors for quickly prototyping their designs—creates items from the bottom up, depositing materials in layers as thin as 0.04 millimeter.
3-D printers are generally designed to take advantage of gravity and surface tension to help form layers without air bubbles or other imperfections that weaken the finished product. “In the presence of microgravity all the components of a 3-D printer begin to float around, and even fractions of a millimeter of float can be detrimental to a print,” says Made in Space chief technology officer Jason Dunn. Without going into specifics—for competitive reasons—Dunn says that his company has developed “the first 3-D printer that is essentially gravity independent.”
The Latest on: 3-D Printing in Microgravity
- NASA: Objects 3D Printed in Space Perform Well Enough to Support Missions on November 8, 2018 at 5:41 am
According to NASA’s full assessment of the research, the influence of gravity or microgravity had no effect on the process, and the scientists behind the study are confident that astronauts will event... […]
- ESA's MELT 3D printer designed for use in microgravity on October 18, 2018 at 8:05 am
European Space Agency’s first 3D printer designed for use in microgravity conditions, printing aerospace-quality plastics, has won the TCT Aerospace Applications Award 2018. Images credit: ESA ESA’s M... […]
- China Uses DLP Technology to 3D Print Ceramics in Microgravity on September 20, 2018 at 8:10 am
Two years ago, China made big news when it tested a 3D printer in zero gravity. The country’s work in microgravity 3D printing has been progressing since then, and today it was announced that scientis... […]
- 3D Printing with Magnets in Microgravity on June 26, 2018 at 1:20 pm
While methods of 3D bioprinting vary, most of them have one thing in common – they print cells layer by layer into a desired ... led to the development of a new method for the formative 3-D biofactory ... […]
- China pioneers ceramic 3D printing in microgravity using DLP technology on June 21, 2018 at 3:46 am
"This is a widely used 3D printing technology, but it's previously been regarded as inapplicable in a microgravity environment," said Wang Gong. A ceramic sample produced in microgravity. Image credit ... […]
- A Startup Developed a 3D Printer Capable of Working in Microgravity on July 28, 2017 at 10:18 am
Made in Space, a 3D printing startup, has provided an answer to NASA’s problems with developing tools in theworks in microgravity on the International Space Station (ISS) by creating a material that c... […]
- Made In Space explain how 3D printing is advancing the space industry on January 20, 2017 at 4:06 am
3D Printing Industry asked Justin Kugler ... Currently work is underway to advance the enterprises additive manufacturing, microgravity-enabled materials, and space-based services. As we reported earl... […]
- Space station 3-D printed items, seedlings return in the belly of a Dragon on February 23, 2015 at 3:59 pm
Insight from demonstrations in microgravity also may help improve 3-D printing technology on Earth. Many physical science investigations take place aboard the space station. Hardware and data from the ... […]
- 3-D Printer Creates First Object in Space! on December 9, 2014 at 4:23 am
NASA’s Marshall Center prior to launch. The goal of this analysis is to verify that the 3-D printing process works the same in microgravity as it does on Earth. […]
- The International Space Station Is About to Get Its First 3D Printer on June 12, 2014 at 4:10 pm
Today, Made in Space announced that it will be sending a 3D printer to the International Space Station, having aced all of ... and will be performing a variety of print tests from the ISS's Microgravi... […]
via Google News and Bing News