Carbon nanotubes used to build a near-ideal efficiency solar cell

Today’s photovoltaic technology, while certainly promising, offers very poor efficiency because of inherent issues in its working mechanism. Using carbon nanotubes, however, Cornell University researchers now hope to lead the way to the next generation of highly efficient solar panels.

How traditional solar cells work (and why they are so inefficient)

In a traditional, silicon-based solar cell, two silicon layers with opposite polarization — p and n, positive and negative — are placed next to each other. When photons hit the top part of the cell, which is designed to let the light through reflecting only a small portion of it, their energy frees the chemical bounds of both an electron and the corresponding electronic hole left by it, allowing them both to move freely.

The electric field in the cell will make the “freed” electron tend to approach the n layer and the electronic hole approach the p layer (see accompanying image). These charges moving in opposite directions generate an electric current.

The main issue with this approach is that a very precise amount of energy is needed to free an electron-hole pair: if the photon has lower energy, it will just go right through the cell; if it has higher energy, the remaining one will just be dissipated as heat. This fact alone accounts for nearly 70 percent of efficiency loss in a solar cell.

As a consequence, today’s typical solar cell efficiency is placed somewhere between 12 and 14 percent, with some commercially available panels going up to 20 percent and (extremely expensive) cells for space applications reaching only a few more points.

Read more . . .

Related articles by Zemanta

• Nanopillar Solar May Cost 10x Less Than Silicon (hardware.slashdot.org)
• Looking deeply into polymer solar cells (scienceblog.com)
• Thin-Film Solar Startup Debuts With $4 Billion in Contracts (wired.com)
• Solar Power Will Make a Difference–Eventually (technologyreview.com)

Random Posts:

• TV Stations Start Broadcasting to Mobile Gadgets
• First Intelligent Financial Search Engine Developed
• Tiny glitter-sized photovoltaic cells could revolutionize solar power
• Bad Money
• China’s Threat Revives Race for Rare Minerals

Related posts:

1. Producing carbon nanotubes on an industrial scale
2. Tiny glitter-sized photovoltaic cells could revolutionize solar power
3. Carbon nanotubes offer new way to produce electricity
4. Innovation Puts Next-Generation Solar Cells on the Horizon
5. Carbon nanotubes used to make batteries from fabrics

Tags: efficiency loss, higher energy, Innovation, photovoltaic technology, polymer, poor efficiency, solar cell efficiency, solar cells, solar panels, solar power, thin film

This entry was posted on Monday, September 14th, 2009 at 12:03 pm and is filed under Cutting-edge Research, Innovation, Nanotech, Project Energy, gizmag. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.