Most of the 150 million tons of plastics produced around the world every year end up in landfills, the oceans and elsewhere. Less than 9 percent of plastics are recycled in the United States, rising to about 30 percent in Europe.
That’s a $176 billion problem, the potential energy savings scientists say could be achieved from recycling all global plastic solid waste. But new approaches can increase the amount of plastic waste that can be successfully recycled, researchers from the University of Houston and IBM report in a perspective published this week in Science.
That means developing new plastics that are more easily recycled, along with finding ways to more efficiently recycle existing plastics. These approaches can range from methods to recycle different types of plastics together in one waste stream, avoiding a costly and time-consuming sorting process, as well as methods to break down plastics in a more energy-efficient manner.
“Recent research points the way toward chemical recycling methods with lower energy requirements, compatibilization of mixed plastic wastes to avoid the need for sorting, and expanding recycling technologies to traditionally nonrecyclable polymers,” wrote the article authors, Megan L. Robertson, associate professor of chemical and biomolecular engineering at UH, and Jeannette M. Garcia, a polymer chemist at the IBM Almaden Research Center.
Improving methods to recycle existing plastic materials is a key priority. “New materials enter the market slowly, and thus the biggest impact is in developing more efficient methods to recycle the plastics that are produced in large quantities today,” said Robertson. “One the other hand, research advances can pave the way for more easily recyclable materials for the future.” One example is the category of polymers known as thermosets, which can’t be melted down for repurposing, preventing their recycling with traditional methods.
Robertson’s lab develops biorenewable components for thermosets, replacing hydrocarbon-based polymers with those made from vegetable oils or other plant-based materials. That could lead to new end-of-life options such as composting or chemical recycling for these materials, a huge leap forward.
The perspective is part of a series published by Science to explore issues related to the environmental impact of polymers, including their source (petroleum vs. biosources), advances in recycling and biodegradable polymers.
Robertson and Garcia note three key issues:
- Plastics must be sorted for recycling, which adds effort and expense. Plastics, or polymers, are comprised of large molecules, so most don’t mix when heated, similar to the interaction between oil and water. Research is focused on finding substances that can facilitate the mixing of different types of plastics, known as compatibilizers, allowing them to be recycled together. Finding a compatibilizer that works for all polymers would be ideal, but Robertson said current technology requires a tailored approach for each plastic mixture.
- Chemical recycling involves using a catalyst to break down plastics to produce lower-molecular-weight products, a process the researchers say has been hindered by high energy costs. Work to develop more efficient catalysts is underway.
- The majority of plastics currently recycled are composed of polyethylene terephthalate (PET), which is the component used in most water bottles, and polyethylene, the most highly produced plastic. Expanding recycling technologies to other plastics beyond PET and polyethylene is an ongoing area of research. Even more challenging is developing methods for recycling polymers that can’t be processed through melting at elevated temperatures, such as thermosets and elastomers (rubber materials).
With any potential solution, the researchers say it is critical that a material’s performance isn’t impacted in order to make it easier to recycle. Subjecting plastics to many use and recycling cycles without loss of performance is an open challenge for researchers.
“Enhancing plastics recycling beyond the current level has many potential societal advantages, such as reducing greenhouse gas emissions, avoiding waste buildup in the environment, decreasing the dependence on finite petroleum resources for its production, and recovering the economic value of plastic solid waste,” the researchers wrote.
That has begun, they say, pointing to start-up companies that have scaled up chemical recycling methods for polystyrene waste or developed sorting processes to separate materials into pure feedstocks.
That and other research, they wrote, “raise hope that before long, recycling rates for plastics will be much higher than today.”
Learn more: Scientific Advances Can Make it Easier to Recycle Plastics
The Latest on: Plastic solid waste
[google_news title=”” keyword=”plastic solid waste” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
- At UN, Pakistan renews commitment to beat plastic pollution, bolster waste managementon March 28, 2024 at 9:51 am
Pakistan has plans to fight plastic pollution and improve waste management system, Ambassador Munir Akram has said, amid global efforts to sustain a liveable planet.“We plan to i ...
- Recycling Composition Studies Raise the Bar on Residential Waste Programson March 28, 2024 at 8:45 am
Waste characterization data turns into information that helps plan how to reduce waste and contamination, set up recycling programs, and conserve money ...
- Baguio village flooded after downpour, no thanks to plastic wasteon March 27, 2024 at 10:58 pm
Mayor Benjamin Magalong says the flooding at City Camp Lagoon is a ‘compelling lesson on the importance of proper trash disposal’ ...
- Greensboro’s solid waste collections manager wants leaf, yard waste program run safely, efficiently, correctlyon March 27, 2024 at 7:40 pm
Before I get started here, I need to mention something. In this piece, I’m not getting into the controversy surrounding the upcoming changes to Greensboro’s loose-leaf collection program. We, as a ...
- MC gets tough: Segregate waste to prevent penaltyon March 26, 2024 at 4:45 pm
Chandigarh: Over the past year, Chandigarh municipal corporation has sharply ramped up its drive against illegal dumping of garbage, including non-seg.
- Plastic Fastingon March 26, 2024 at 11:24 am
“Plastic fasting means consciously avoiding the use of plastic products, especially short-lived things that end up in the bin after a short period of use,” says Silvia Cabrera-Cayola. She is an expert ...
- GiGi’s General Store, A Plastic-Free Sustainable Shop, Opens In Ravenswoodon March 26, 2024 at 7:07 am
Owner Nicolle Wood offers pantry items, upcycled kitchen utensils and containers, gardening materials, cleaning supplies and more in hopes of making sustainability more accessible and affordable.
- Dow and Procter & Gamble to Develop a New Proprietary Recycling Technology Targeting Hard-to-Recycle Plastic Wasteon March 25, 2024 at 8:00 pm
Dow and the Procter & Gamble Company have announced a joint development agreement to create a new recycling technology. The vision is to enable ...
- Israeli company transforming trash into new type of plastic eyes Massachusetts for recycling planton March 25, 2024 at 5:13 am
UBQ uses a mix of food scraps and plastic to create a material that it sells to companies as a greener plastic.
- Centre issues guidelines on solid waste management in aquaculture unitson March 20, 2024 at 8:54 am
The Ministry of Fisheries, Animal Husbandry and Dairying (MoFADH) published the regulations on March 16, which advocate reducing and managing waste across all stages of production, including ...
via Google News and Bing News