A diagram of the battery shows how lithium ions can return to the lithium electrode while the lithium polysulfides can’t get through the membrane separating the electrodes. In addition, spiky dendrites growing from the lithium electrode can’t short the battery by piercing the membrane and reaching the sulfur electrode.
Image credit: Ahmet Emre, Kotov Lab
A new biologically inspired battery membrane has enabled a battery with five times the capacity of the industry-standard lithium ion design to run for the thousand-plus cycles needed to power an electric car.
A network of aramid nanofibers, recycled from Kevlar, can enable lithium-sulfur batteries to overcome their Achilles heel of cycle life—the number of times it can be charged and discharged—a University of Michigan team has shown.
“There are a number of reports claiming several hundred cycles for lithium-sulfur batteries, but it is achieved at the expense of other parameters—capacity, charging rate, resilience and safety. The challenge nowadays is to make a battery that increases the cycling rate from the former 10 cycles to hundreds of cycles and satisfies multiple other requirements including cost,” said Nicholas Kotov, the Irving Langmuir Distinguished University Professor of Chemical Sciences and Engineering, who led the research.
“Biomimetic engineering of these batteries integrated two scales—molecular and nanoscale. For the first time, we integrated ionic selectivity of cell membranes and toughness of cartilage. Our integrated system approach enabled us to address the overarching challenges of lithium-sulfur batteries.”
Previously, his team had relied on networks of aramid nanofibers infused with an electrolyte gel to stop one of the main causes of short cycle-life: dendrites that grow from one electrode to the other, piercing the membrane. The toughness of aramid fibers stops the dendrites.
But lithium sulfur batteries have another problem: small molecules of lithium and sulfur form and flow to the lithium, attaching themselves and reducing the battery’s capacity. The membrane needed to allow lithium ions to flow from the lithium to the sulfur and back—and to block the lithium and sulfur particles, known as lithium polysulfides. This ability is called ion selectivity.
“Inspired by biological ion channels, we engineered highways for lithium ions where lithium polysulfides cannot pass the tolls,” said Ahmet Emre, a postdoctoral researcher in chemical engineering and co-first author of the paper in Nature Communications.
The lithium ions and lithium polysulfides are similar in size, so it wasn’t enough to block the lithium polysulfides by making small channels. Mimicking pores in biological membranes, the U-M researchers added an electrical charge to the pores in the battery membrane.
They did this by harnessing the lithium polysulfides themselves: They stuck to the aramid nanofibers, and their negative charges repelled the lithium polysulfide ions that continued to form at the sulfur electrode. Positively charged lithium ions, however, could pass freely.
Original Article: 1,000-cycle lithium-sulfur battery could quintuple electric vehicle ranges
More from: University of Michigan
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Lithium-sulfur battery
- Lyten Ships Lithium-Sulfur Battery A-Samples for Automotive, Consumer Electronics, and Military Customer Evaluation
Lyten, the supermaterial applications company and global leader in lithium-sulfur battery technology, today announced it has shipped A samples of its 6.5 Ah (C/3 discharge rate, 25° C) lithium-sulfur ...
- AAM Briefs
AAM Briefs is published in Advanced Air Mobility Report, an Aviation Week Intelligence Network (AWIN) Market Briefing and is included with your AWIN Premium membership. Already a member of AWIN or ...
- Innovative New Tech is Transforming the Battery Market
The battery market is brimming with game-changing innovations, promising higher energy density, faster charging, and greener production methods.
- Zeta Energy Appoints Michael Everett as COO
Prior to joining Zeta Energy, a lithium-sulfur battery developer, Michael Everett previously served as president and COO at Advanced Battery Concepts.
- Michael Everett Joins Zeta Energy as Chief Operating Officer
Zeta Energy, a Houston-based company that has developed a world-leading lithium-sulfur battery, announced today that Michael Everett will join Zeta as Chief Operating Officer.
Go deeper with Google Headlines on:
Lithium-sulfur battery
[google_news title=”” keyword=”lithium-sulfur battery” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Lithium-sulfur batteries
- Lyten Ships Lithium-Sulfur Battery A-Samples for Automotive, Consumer Electronics, and Military Customer Evaluation
Lyten, the supermaterial applications company and global leader in lithium-sulfur battery technology, today announced it has shipped A samples of its 6.5 Ah (C/3 discharge rate, 25° C) lithium-sulfur ...
- AAM Briefs
AAM Briefs is published in Advanced Air Mobility Report, an Aviation Week Intelligence Network (AWIN) Market Briefing and is included with your AWIN Premium membership. Already a member of AWIN or ...
- Innovative New Tech is Transforming the Battery Market
The battery market is brimming with game-changing innovations, promising higher energy density, faster charging, and greener production methods.
- Solidion’s BEEP Platform Solves the Design and Manufacturing Issues of Solid-State Batteries
three classes of solid-state batteries, including Silicon-rich all-solid-state lithium-ion cells (Gen 1), anodeless lithium metal cells (Gen 2), and lithium-sulfur cells (Gen 3), all featuring an ...
- Charging future EVs could take seconds with new sodium-ion battery tech
A new type of hybrid sodium-ion battery that offers both high capacity and rapid-charging capabilities could power mobile devices, electric vehicles and space tech.
Go deeper with Google Headlines on:
Lithium-sulfur batteries
[google_news title=”” keyword=”lithium-sulfur batteries” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]